Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Nice
thank you!
Can it be done on 1.6TD ? If yes what is needed beside this module? Do you have a webpage?
If you have can bus,it works. Besides that you can use analogue inputs to feed the gauge.
Can we use this with a Speed Controller that also sends all commands and info through the CANBus ? Please reply - we will purchase 10+ units if we can program this correctly
yes with the new version. Hit us up via Email
Is there any english version of this video. Have just got install on it on Golf GTi 1991. Great product!
We have an english installation instruction if that helps
@@CANchecked yes please! Where do i find this?
Did you stop making this? If so, would you be open to publish this project as open source?
We are about to launch Gen2
@@CANchecked My Scirocco didn't come with MFA, I just have a clock. The MFA is simply a momentary switch, correct? Could I just add my own somewhere?
Why aren't analogue RPM and digital matching?
MrWilma127 because the needle was fitted with an offset,which was fixed later.
Was brauch ich alles damit das funktioniert? Habe einen originalen 1989 MFA Tacho, könnte ich das ding einfach kaufen, anstecken und fertig?
Kommt auf dein Steuergerät an.
Can you use it with the original ECU?
With any ECU that have can bus or you use the 4 analogue inputs of the display.
Will this work on a mk4 TDI ECU? Which values would I be able to read?
Jolt Koens yes it does work. You can see RPM, intake temp, water temp, boost pressure
funktioniert das auch beim normalen Golf mit MFA?
Tobias Schmidt ja du kannst die 4 analogen Eingänge nutzen
wo kann ich das kaufen
aktuell ist die neue Version im test. schick uns ne Email
Can you make it show your dsg gear?
Mk2Dunx yes we can 💪🏼
hello how mutch is it for my golf mk2 g60 and how tuff is it make it work ?
Frank Bergsvåg it’s 235€ w/o VAT. You will need additional analogue sensors.
@@CANchecked and how do you switch info on the display?
@@gocpod with the original MFA stick
@@CANchecked so regular clock tacho is a no go for this upgrade :(((
@@gocpod you can install in any MK2 clock. The lever can be installed quiet easily.
Hello, how much for vw mk11.8 8v?
234,45€ + VAT
Can this run on dta s80 ecu?
Unfortunately not yet
naser ihsan yes you can now!
Sorry, aber das GUI geht gar nicht.Das geht doch tausend mal hübscher...
Happy New Year! Still produce it? I definitly want to buy it!
Nice
thank you!
Can it be done on 1.6TD ? If yes what is needed beside this module? Do you have a webpage?
If you have can bus,it works. Besides that you can use analogue inputs to feed the gauge.
Can we use this with a Speed Controller that also sends all commands and info through the CANBus ? Please reply - we will purchase 10+ units if we can program this correctly
yes with the new version. Hit us up via Email
Is there any english version of this video. Have just got install on it on Golf GTi 1991. Great product!
We have an english installation instruction if that helps
@@CANchecked yes please! Where do i find this?
Did you stop making this? If so, would you be open to publish this project as open source?
We are about to launch Gen2
@@CANchecked My Scirocco didn't come with MFA, I just have a clock. The MFA is simply a momentary switch, correct? Could I just add my own somewhere?
Why aren't analogue RPM and digital matching?
MrWilma127 because the needle was fitted with an offset,which was fixed later.
Was brauch ich alles damit das funktioniert? Habe einen originalen 1989 MFA Tacho, könnte ich das ding einfach kaufen, anstecken und fertig?
Kommt auf dein Steuergerät an.
Can you use it with the original ECU?
With any ECU that have can bus or you use the 4 analogue inputs of the display.
Will this work on a mk4 TDI ECU? Which values would I be able to read?
Jolt Koens yes it does work. You can see RPM, intake temp, water temp, boost pressure
funktioniert das auch beim normalen Golf mit MFA?
Tobias Schmidt ja du kannst die 4 analogen Eingänge nutzen
wo kann ich das kaufen
aktuell ist die neue Version im test. schick uns ne Email
Can you make it show your dsg gear?
Mk2Dunx yes we can 💪🏼
hello how mutch is it for my golf mk2 g60 and how tuff is it make it work ?
Frank Bergsvåg it’s 235€ w/o VAT. You will need additional analogue sensors.
@@CANchecked and how do you switch info on the display?
@@gocpod with the original MFA stick
@@CANchecked so regular clock tacho is a no go for this upgrade :(((
@@gocpod you can install in any MK2 clock. The lever can be installed quiet easily.
Hello, how much for vw mk11.8 8v?
234,45€ + VAT
Can this run on dta s80 ecu?
Unfortunately not yet
naser ihsan yes you can now!
Sorry, aber das GUI geht gar nicht.
Das geht doch tausend mal hübscher...
Happy New Year! Still produce it? I definitly want to buy it!