Unboxing | CR-10 Smart Pro Unboxing & Assembly - Comprehensive Range of Upgrades
HTML-код
- Опубликовано: 25 окт 2024
- Support Wi-Fi/Bluetooth/RJ45, Remote Control via Creality Cloud App, Dual-mode Levelling, Equipped with AI HD Camera and LED Light, Full-metal Dual-gear Direct Extruder Compatible with Diverse Filaments, Spring Steel PEI Magnetic Sheet Bendable to Take Out Models, Print Size 300x300x400mm
CR-10 Smart Pro introduction video:
• Product Hight 1 Creali...
More info:
store.creality...
If you have any questions about using Creality 3D Printers, feel free to reach us at cs@creality.com.
![Diggy Graves - Red Vineyard [Official Lyric Video]](http://i.ytimg.com/vi/8Ro085T0mnQ/mqdefault.jpg)
This set up instructional video is really great considering I just got this. Very helpful!!!
My CR10 is from 2017. Currently printing just fine, minor adjustments and replacing nozzles over time. Ordered the Ender 3 V2, and will add the CR Touch. I used my original CR10 to prototype an product that I now have 2 patents on. I just wish I could make my CR10 faster.
I just received mine. There's a few issues.
- One is the cable for the power doesn't stay in, just using another cable worked fine.
- The other is - I cannot figure out how to manually bed level. I can only spin the knob so much before it falls off. And half the time it's not in the exact centre or corner. It just seems broken.
- Touchscreen needs to be fixed, it's the most unresponsive capacitive touchscreen I've ever used.
I've been trying to level the bed for hours. Finally got it sorted of level. Trying to load the filament - but the firmware is in a loop. 🤦
Hello did you manage get the printer fixed ore did you send it back?
It's great to see so many interesting printers coming from Creality with the new lineup.
thank you
You don't really cover the z-offset in this video, I did the manual adjustment as per the instructions and auto bed levelling and the head is 3.6mm above the bed when trying a print!
Its very great the creality are selling not only cheap printers but also highednd and very high quality so this will satisfy a LOT of costumers...
thank you
Very interesting printer. I like the upgrades. No bowden tube. And a few other upgrades as well. Very clean. left a like
thank you :)
Creality are actually getting really good with their printers so glad direct drive is basically a more mainstream feature but the camera setup isn't very great you could use that camera but just 3d print a threaded mount to put the camera somewhere else to integrate it into the printer
thank you, any ideas, contact us, we are happy to hear you.
@@Creality3D the only thing I don't like are the bed leveling knobs
Just orderet one, cant wait !! Is there Any upgrades avalible in the future for the hotend? Like bigger heater block for v6 nozzles ?
This video was super helpful! Great printer so far!
Any idea when this will be available in Canada? Any plans to make a cheaper option to get the printer without the camera and led light?
This is what everybody wanted
thank you
I am using cr10 smart. And I will upgrade to this printer. But I like the black step motor it's so cool. Let's paint everything black.
We also need more dual z limited sensor like a anycubic chiron printer. Then the machine will automatically level the z axis
Olá...a minha não está aparecendo a opção wifi..oque pode ser ?
My printer just arrived today and it doesn't start . I see only 7 dots on the screen as long as I'm pressing the power button but nothing happens. For how long I must press this button 🔘 ? It's definitely not longer than 5 minutes. And still not working . Is there anything to do before I press this button?
flick the toggle net to where u plug power cord in
Thanks helped me
amazing 🔥🔥🔥 creality printers are so good
thank you
I wonder when will creality can throw away bed leveling screw and use fixed bed like prusa.
Also CR Touch still taking long time, why they are not focusing on Pinda probe like prusa?
Dont get me wrong i have ender S1 and mk3s+ and i hope creality will make upgrade for all the printer so we can use super PINDA and fixed bed mounting.
Oh also smooth rod for x & y axis are far stable than v slot pom wheel
thank you for your suggestion, Antonny
@@Creality3D maybe kind of like Kingroon can use 3 axis of linear SGR15 , so sturdy and solid. No nylon wheen that can wear over time.
Oh and fixed bed like prusa is heaven, no more adjusting leveling each time. Do not use aluminum bed base and glue the magnetic , just copy prusa they are using magnetic pcb mk53 and that is brilliant
Thanks
Would love to do a review and guide on the CR10 Smart Pro! Check out my review and set up guide for the regular CR-10 smart and let me know what you think: ruclips.net/video/J0NwZ49Z-DA/видео.html
you did a great job. we'd happy to know you, your works are awesome! Could you please send more information about your cooperation needs to the email brand@creality.com, we will email you and keep in touch with you, thank you
这款机器的送料是在上面挂着的，有没有办法可以放置干燥箱呢？
Will this printer be able to connect to a PC directly without rerouting cables?
Would like to be able to run a custom Octopi with this printer.
in the future, Viktor
@@Creality3D what does that mean does it or does it not have a PC port?
when can you pick one up on amazon?
here is the link for you : www.creality3d.online/products/creality-cr-10-smart-pro-3d-printer
Hello sir can you please help me and guide me is this cr10 smart pro printer is best or cr10 smart is best for beginners to do professional stuff even for carbon fiber and other material i am very much confuse which one i could buy ??
it's hard to say... both are professional grade in different features, such like Pro with light, both available for PLA, PETG, carbon fiber ,TPU.
@@Creality3D what about firmware is the firmware is same i am asking you through print quality and ,like lcd hang and other those feature which give the best quality print and dont stuck , except settings ?? Plz reply
When did the Pro will be released for EU?
estimate end of Jan, here is the link for you: www.creality3d.online/products/creality-cr-10-smart-pro-3d-printer
I wrote an after-sale support email for my problem with cr 6 se. still hasn't gotten back to me for 2 weeks.
there are too many email need to handle, i appriciate your patience
@@Creality3D I have the same problem. Im waiting even longer... Thever will be an answer...
Why doesn't this have automatic bed leveling?
it has, CR-10 smart Pro with 2 types of leveling functions to meet the preferences of different users, after manual leveling, automatic leveling with CR Touch is more accurate.
@@Creality3D Why doesn't manual work? It seems completely broken. Doesn't work anything like the video.
whens the release date???
goods are being shipped to various countries . Europe and North America will be available at the end of January or early February. Please keep an eye on it, thank you. If you have any inquiries, contact me please. You can also find it here:
www.creality3d.online/products/creality-cr-10-smart-pro-3d-printer
www.creality3dofficial.com/products/cr-10-smart-pro-3d-printer
EUR:
www.creality3d.online/products/creality-cr-10-smart-pro-3d-printer
I have just returned my ender 3 v2 in 3 weeks not 1 print and even the seller was stumped. I did contact Creality but was told to contact the seller so not particularly helpful. I have a another more expensive Creality machine which is great but this ender 3 has been a terrible experience
Hi Paul, is there problem with your Ender 3 V2? if your printer have any problem, please contact our professional tech support : cs@creality.com, attach some failed pics or videos is more helpful for them to give you solution, thank you.
@@Creality3D hi I have tried 3 different occasions but they just refer me to the seller. The printer has been returned as I am not prepared to waste any more time on this. My other Creality machine works fine ender 5 plus , it’s just a pity that a public comment has prompted a reply, although now it’s to late. I have also cancelled my order for two Halot Resin printers.
@@Creality3D hello 2 of the eccentric nuts are not tightened, the table is not fully fixed, there is slight play
the nut is constantly spinning and the wheel is not tightening
is this a problem
I can't print anything
please help
2:00 now to get that on my Ender 3 V2
Wifi is great but I want to print from my laptop not my phone and my own models not someone else's models.
not now yet, any ideas, contact us, we are happy to hear you.
@@Creality3D Well, maybe you should look at adding wifi or some cable connection so you can print directly from your laptop to your printer.
@@Creality3D Can't you send prints from Cura to the printer?
I am very disappointed and their printer.
I'm having huge trouble getting it set in leveling
when I have set all 4 corners then I have to set the middle
and there I must have it more down. then the corners get too close.
And I often find that when I press the pills on the touch screen, I can hear a beep, but it does not move it down even though it counts on the display, so you can not set it 100%.
I have regretted spending so much money on the CR-10 Smart pro. it should have been called NOT SMART. !!!
And it also often makes 203 errors ..
i have another printer it costs less than half of it and prints 400 times better and nicer.
Then you can tell me what's wrong with this shitty printer
If in need of technical support, please email to cs@creality.com, which is our tech support as well as after-sale service.Due to tons of emails go into this folder, it maybe response you not instantly,
I'd appricite you if you can wait for it .
or join in the Facebook Group (facebook.com/groups/3110994512278883/) to discuss with thousands of experienced 3D printer users.
I have the very same problem... I think its because the bed expands by heat and has no space so its bending in the middle. I thought about using thinner screws to give it a little more space. Of course the printer never ever should come out of the box like this... I never got a answer from the support team when i mailed them.