How To Stick Granite TO Concrete Steps Using Mapei

[@markgould9259]

Good stuff Mapei strong adhesive and waterproof

[@GreentopLandscapes]

Brill stuff Mark

[@andrewholdsworth2198]

Can I use this same method to use on a concrete block retaining wall , great vid

[@GreentopLandscapes]

Yes Andrew mate

[@Bash-yn9cu]

Hi i spoke with the manufacturer they said you can stick sandstone to concrete. Can i grout this or should i stick close. And what thickness should i apply, thanx in advance

[@GreentopLandscapes]

Happy to talk

[@paulbocking3397]

If I'm using mapei to stick porcelain to steps ...do I need to slurry prime the porcelain first

[@GreentopLandscapes]

No Paul

[@danieldew8763]

Hi mate was wondering what the difference is between the mapei rapid-set and the fast-set I'm gonna be sticking 20mm porcelain to concrete just don't know witch would be best to use. Cheers

[@GreentopLandscapes]

Hi Dan mate, just message Mapei technical for specifics to ensure a good outcome.

[@danieldew8763]

@@GreentopLandscapes cheers bud

[@nwa1169]

Can you use the same stuff on polished granite tiles for a fire harth?

[@GreentopLandscapes]

Hi there, thanks for watching, that maybe a question for Mapei at there technical department, stay safe

[@janismekss]

Thanks a million!
Great lesson

[@GreentopLandscapes]

My pleasure!

[@EN4CER69]

Here you go again m8: @GreentopLandscapes I only left half an inch gap between the house and the slabs, then pointed. About 10 cm below the damp course. There is no ponding, but at times the bricks up to the damp course appear damp, but not any above the damp course. Does this all sound okay and correct? Thanks 👍

[@GreentopLandscapes]

Ok.. the camp course is doing its job then what I tend to do is to leave a 50mm gap but I back fill with pebbles to let the water run down

[@EN4CER69]

@@GreentopLandscapes Hi Johnnyboy, thanks for the info. If it ever became a problem, would it be work chasing out a gap in the mortar between the slabs and the house? If so, how did would you go down? Thanks for any help 👍

[@GreentopLandscapes]

You need to create a void and back fill approximately 100mm deep and use pea gravel

[@EN4CER69]

@@GreentopLandscapes grand... If water isn't rising above the damp course is it worth leaving it alone? PS your videos are inspirational 😁

[@shenoyglobal]

if i have to attach marble tiles on an exterior wall 40 feet tall is dry attachment with clips better or wet attachment good?

[@GreentopLandscapes]

Yes, definitely at this height I think its a legal requirement to mechanically fix

[@fraser8385]

Hi - if granite 20 mm paving did delaminate could i use this for to re-fix to the smooth mortar bed Thanks

[@GreentopLandscapes]

Yes

[@markgould9259]

What did you grout the joints with

[@GreentopLandscapes]

Mark I have to admit it was a brush in grout on here as the client had seen it on line

[@mja72]

Gotta shred those sponges!!

[@GreentopLandscapes]

Lol

[@EN4CER69]

Nice work JohnyBoy, but I'm a bit disappointed you still haven't answered the questions I raised 3 times now 😢

[@GreentopLandscapes]

Sorry mate I have not seen it try again please

[@EN4CER69]

@GreentopLandscapes I only left half an inch gap between the house and the slabs, then pointed. About 10 cm below the damp course. There is no ponding, but at times the bricks up to the damp course appear damp, but not any above the damp course. Does this all sound okay and correct? Thanks 👍

[@fintecgroundworksltd7893]

Fabulous Job👌

[@GreentopLandscapes]

That means a-lot , thank you, love to see you on my Facebook group.

[@jostininsignia]

You

[@GreentopLandscapes]

`Lol

[@jostininsignia]

Yeah

[@GreentopLandscapes]

Is that a good yeah?👍

[@jostininsignia]

Raven Queen

[@slovakjakpica]

It says maximum tile size 300x300 mm...

[@GreentopLandscapes]

@@slovakjakpica does it

[@adierattley3927]

Turn that Radio off !

[@GreentopLandscapes]

sorry i did not know.