@@TBD7711 so I bought a three pin connector that looks like it goes into the scouts on the auxiliary. Where does the other three wires go on the back of the receiver? Is there anyway you can take a picture or make a quick video? Or do you have a link for the specific cable just in case I’m pretty sure I bought the right one though.
@@TBD7711yessss. All right well I just ordered them so now I get to wait a couple more weeks. I bought the connectors that have raw wire on the other side. All good.
Congratulations on the comparison, you won a subscriber. I bought a fatshark scout but I found its screen too dark in relation to the cobra x v4 I had, I sold the cobra because of the rolling screen I had, and even with another module (tbs fusion) it kept scrolling the image. I found the scout receiver horrible and will do a test with rapidfire. Have you had problems with rolling screen on your cobra? I only wear glasses for long range, above 20km. Big hug
@@strodrigues I had not scrolling but when I use speedybee receiver on skyzone cobra x v4 had a scrolling a little, for the fatshark dark screen you can adjust the brightness, and ty for sub :)
Thanks for this. I have the fat shark and was considering the skyzone, the speedybee module and upgrading antennas. Didn’t know the module could be attached to the fat shark. I think in responding to someone you said you prefer the scout, but is there anything you think the skyzone does better?
@@Guy-em4ck The skyzone cobra x v4 was my first option, but after they updating the motherboard, the goggles no longer work with any module receiver such as the speedybee receiver, and in addition, the 60 fps on the fatshark is better than on the skyzone cobra x v4 new screen.
@@TBD7711 thank you for the reply. The cable I have are the colors red black and yellow so maybe I ordered the wrong cord . I thought maybe for the speedeebee it was a different set up because it won’t turn on when plugged in like the video
@@TBD7711and why exactly is that? And maybe you could help me with this decision too? Cobra s with some aftermarket antennas for 120$ or fat shark scout for 150€ 🤔.
Can I put a speedy bee module in my cobra x v3 box goggles?
Thank you for taking the time to make this video, it will be helpful to the community
@@brundle_fly5123 Thank you man, I appreciate you.
@@TBD7711 so I bought a three pin connector that looks like it goes into the scouts on the auxiliary. Where does the other three wires go on the back of the receiver? Is there anyway you can take a picture or make a quick video? Or do you have a link for the specific cable just in case I’m pretty sure I bought the right one though.
ruclips.net/video/WU7nh5Z_1WY/видео.html
@@TBD7711yessss. All right well I just ordered them so now I get to wait a couple more weeks. I bought the connectors that have raw wire on the other side. All good.
Congratulations on the comparison, you won a subscriber. I bought a fatshark scout but I found its screen too dark in relation to the cobra x v4 I had, I sold the cobra because of the rolling screen I had, and even with another module (tbs fusion) it kept scrolling the image. I found the scout receiver horrible and will do a test with rapidfire. Have you had problems with rolling screen on your cobra? I only wear glasses for long range, above 20km. Big hug
@@strodrigues
I had not scrolling but when I use speedybee receiver on skyzone cobra x v4 had a scrolling a little, for the fatshark dark screen you can adjust the brightness, and ty for sub :)
Thanks for this. I have the fat shark and was considering the skyzone, the speedybee module and upgrading antennas. Didn’t know the module could be attached to the fat shark. I think in responding to someone you said you prefer the scout, but is there anything you think the skyzone does better?
@@Guy-em4ck The skyzone cobra x v4 was my first option, but after they updating the motherboard, the goggles no longer work with any module receiver such as the speedybee receiver, and in addition, the 60 fps on the fatshark is better than on the skyzone cobra x v4 new screen.
Are you using stock antennas on the goggles?
How did you fit the SpeedyBee module onto your scout?
I bought a 3 pin to aux cord but not sure the right ports to plug it into to make it work
@@tharrimo4able ruclips.net/video/WU7nh5Z_1WY/видео.html
@@TBD7711 thank you for the reply. The cable I have are the colors red black and yellow so maybe I ordered the wrong cord . I thought maybe for the speedeebee it was a different set up because it won’t turn on when plugged in like the video
Witch one you prefer?
Both are great, but I think that FatShark is better.
Do you mean you like the fat shark scouts with the SpeedyBee receiver?
@@LoVeAmBiEnT yes
@@TBD7711and why exactly is that? And maybe you could help me with this decision too? Cobra s with some aftermarket antennas for 120$ or fat shark scout for 150€ 🤔.