Troubleshooting of Control Valve | Control Valve Problem Find out & Solved.

Поделиться
HTML-код
  • Опубликовано: 26 ноя 2024
  • 🔥Troubleshooting of Control Valve | Control Valve Problem Find out & Solved.
    🔥How to find out and solve if there is a problem with control valve? I tried to show you that through this video. I Hope, after watching this video, facing interview board will be easier for you. And you will get a good idea about it. Its can benefit you a lot in future. And if you have any problem to understand please comment.
    🔥Troubleshooting of Control Valve | Control Valve Problem Find-out and Solved | Hunting Troubleshoot video link👇
    • Troubleshooting of Con...
    🔥Control Valve Maintenance | Control Valve Troubleshooting video link👇
    • Control Valve Maintena...
    🔥Control Valve Volume Booster Troubleshooting video link👇
    • Control Valve Volume B...
    🔥Control Valve vs Motor Operated Valve | What is Different Between Control Valve and MOV?
    • Control Valve vs Motor...
    🔥Control Valve Troubleshooting | Control Valve Maintenance | Control Valve Problem Find-out & Solved video link👇
    • Control Valve Troubles...
    🔥Control Valve Leakage Test By Positioner
    • Control Valve Leakage ...
    🔥Siemen's SIPART PS2 Positioner Auto Calibration in English Video Link👇
    • Siemen's SIPART PS2 Po...
    🔥Siemen's SIPART PS2 Positioner Auto and Manual Calibration in English Video Link👇
    • Siemen's SIPART PS2 Po...
    🔥Flowserve Positioner Auto Calibration | Logix 3200 Positioner Calibration Procedure | Logix 3200MD Video Link👇
    • Flowserve Positioner A...
    🔥ABB Positioner Auto Calibration in Hindi Video Link👇
    • ABB Positioner Auto Ca...
    🔥ABB Positioner Auto Calibration in English Video Link👇
    • ABB Positioner Auto Ca...
    🔥কন্ট্রোল ভাল্বের কোন সমস্যা হলে সেটা কিভাবে ফাইন্ড আউট এবং সলভ করতে হয়? সেটা আমি আপনাদেরকে এই ভিডিওর মাধ্যমে দেখানোর চেষ্টা করেছি। আশা করি, এই ভিডিও দেখার পরে ইন্টারভিউ বোর্ড ফেস করা, আপনার জন্য অনেক সহজ হয়ে যাবে। এবং এটা সম্পর্কে আপনাদের ভালো একটা ধারণা চলে আসবে। যেটা ভবিষ্যতে আপনাদের অনেক উপকারে আসবে। আর আপনাদের বুঝতে কোন সমস্যা হলে অনুগ্রহ করে কমেন্টে জানাবেন।
    🔥Please Subscribe My RUclips Channel.
    🔥RUclips Link👇👇👇
    / @instrumentsolutions
    🔥Facebook Page Link👇👇
    www.facebook.c...
    🔥Massenger Link 👇👇
    m.me/rahin.ahm...
    🔥ধন্যবাদ।।। Thank You 😊😊

Комментарии • 20

  • @EmdadHossain-l7x
    @EmdadHossain-l7x 5 месяцев назад +1

    আপনার ভিডিও দেখে আমি ইলেক্ট্রিক্যাল সুপারভাইজার থেকে ইনস্ট্রুমেন্টস সুপারভাইজার হয়ে গেছি 😊

  • @aminokamad1681
    @aminokamad1681 5 месяцев назад

    Big thanks brother 🔥

  • @kuwaittamilanchennal.2848
    @kuwaittamilanchennal.2848 3 месяца назад

    Super bhai

  • @suraiyarahoman984
    @suraiyarahoman984 7 месяцев назад

    Excellent ❤

  • @jghhfjg2523
    @jghhfjg2523 7 месяцев назад +1

    Excellent but i wish explain about problem different reading between level transmitter and local magnetic level transmitter how solution this problem by hart device

  • @Rimixsong24
    @Rimixsong24 7 месяцев назад +2

    Sir control valve ka comisning par yek video banaye please

  • @ipanjohur3691
    @ipanjohur3691 4 месяца назад +1

    I have qustion sir,
    what is the different between positioner and actuator?

    • @instrumentsolutions
      @instrumentsolutions  4 месяца назад

      If use positioner, then it is control valve.
      And without positioner only actuator then it is sov.

  • @rajeshraju825
    @rajeshraju825 3 месяца назад

    Bhaii mass flow and mag flow me kuch vedio banaye

  • @janisar6896
    @janisar6896 7 месяцев назад +3

    But field side you check voltage you said voltage is ok.
    Then which cable fuse you changed.

    • @Practical.instrumentation
      @Practical.instrumentation 7 месяцев назад +1

      Same question , i would like to ask .

    • @instrumentsolutions
      @instrumentsolutions  7 месяцев назад +1

      See, command cable volt is ok, because Command voltage coming from Positioner to DCS. Problem is DCS Side Fuse.

  • @Powerplant2709
    @Powerplant2709 6 месяцев назад

    O2 analysers pe details video banaye sir

  • @AkashPatel-im5sj
    @AkashPatel-im5sj 6 месяцев назад

    Sir moc ke bare me video banaiye na

  • @DailyfactVlogs
    @DailyfactVlogs 6 месяцев назад

    Fuse kharab hone se aap ka control valve me voltage kaise dikha Raha tha.mujhe reply do

  • @satish_maru
    @satish_maru 7 месяцев назад

    Vacancy hai sir apke yha

  • @bgmiindia2023
    @bgmiindia2023 6 месяцев назад

    Apke pass job milega sir..

  • @amitpandey9809
    @amitpandey9809 5 месяцев назад +1

    Hello sir agar control Bal normal operate ho raha hai per feedback nahin de raha hai to kya Karen