How to Refill SAMSUNG MLT-D111S (111S) Toner Cartridges for M2020, M2070
HTML-код
- Опубликовано: 15 сен 2024
- Learn how to refill your SAMSUNG 111 cartridge to save 85% or more! Refilling is clean, simple, and benefits the environment.
Compatible Printers: Xpress SL-M2020, SL-M2020W, SL-M2021, SL-M2021W, SL-M2022, SL-M2022W, SL-M2070, SL-M2070F, SL-M2070FW, SL-M2070W, SL-M2071, SL-M2071FH, SL-M2071HW, SL-M2071W
This works precisely as advertised. Get the iron tool and remove all of the existing toner before filling. I also recommend you use a basic respiratory filtration mask and have some moist wipes to clean excess from the cartridge exterior after sealing. Order in larger quantities if you are outside of the United States and want to save on shipping. Everything needed to refill our empty cartridge collection was included once we had the iron. (Don’t skimp, it’s worth the one-time cost) The printed result is indistinguishable from the factory filled cartridge for general office use. I was able to refill 10 cartridges in less than one and a half hours on the first try.
We will order again when our supplies are low, Thank you
Thanks for this educational message! I just hate dropping these cartridges in landfills! I'm doing the refill process. It's also about saving money too, but it feels good to avoid more unnecessary landfill garbage. Thanks!
Yeah man, me too. I'm a big outdoorsman. Hate to see people filling landfills with no regard. Why when you can prevent it and save money at the same time. Call me a tree hugger or whatever, but I love the clean outdoors and will do what I can to preserve it.
What the hell.You guys are not telling the while truth.
Mandy Swe Lmao what whole truth? That plastic toner cartridges are great for the environment?
Received my package with 4 bottles. It took like 10 days from ordering to receiving the package! (Living in Europe!)
I didnt punch a hole in the cartridge. I just did the other method (check youtube)
Refill it by the original refill cap in the toner.
First few prints where awful, but after lets say 10 prints quality is good!
i think it had to do with some old powder it may have contain in the cartridge.
Thanks inkowl. I'm Really happy with this cheap refills!
+Downie250 Excellent! I'm glad you like our products!
OK... what "other method"??
did you change the chip?
@@pr4442 haha better late then never. But you can fill this toner by Just the original refill cap. You have to cut off some of the plasrics on the sides of the toner. There are some video's of IT on RUclips what to cut. After this modification is really easy the next time to open the cartridge again and fill IT!
@@Eva-zt5uy hi Eva.
In my model IT doesnt need to be changed. IT Will work without replace the chip. the only downside is the chip thinks its empy (0%) so the printer give you An red light. But IT still wil print!
I dont upgrade te firmware.
Thank you for video, good idea. I used just old stainless steel nut with a proper rim instead of this kind of soldering iron. I heated it with electric stove in the kitchen (of course then I applied it not with bare fingers, take care).
I in no way am trying to take any business away from ink owl as I have bought from them for years now. I am guessing they are more interested in selling toner than the melting tool. I am only posting this so more people buy their ink instead of thinking it is too hard/expensive and just buy a new cartridge. I was able to make a melting tool with my soldering iron (if you already have one) for less than $1. Use a 1/2 copper pipe cap (~$.50) and a small bolt and nut (~$.50). Drill a hole in pipe cap, but the bolt through it tighten the nut to hold the cap, then put the remaining end of the bolt into the soldering iron just like a soldering tip.
this worked for me. They included the tape. I found a circular metal tube and heated it to make my round cut. I'm sure their cutting device is better though. I used some of their tape to cover my "low toner" led light which will now be on forever.
+Peter Schultze Hi Peter,
How is the quality of the printing? I ordered some bottles too :).
Curious about the quality. I didnt orderd the melting tool aswell so i have to find a way to make a hole in the cartrigde myself. You just heated up some metal tube (wich size?)?
In other video's where they refill the MLT-D111s cartrigde they just
scrape of some plastic from the side and took off the plate. Underneath
is a plug which can be taken off to refill the toner, so maybe i can try that method.
I don't have mlt d11. Print quality is good
+Peter Schultze lol why responding in this video then 😂?
I couldn't bypass the low toner message. Where do I find the system setup on M2020?
I don't know why my printer prints in grey after refilling.. It lacks so much in contrast. Any tip?
what about the waste toner container? do i have to empty the waste toner?
Not true for M2020W - it will not print when the toner chip counter reaches 0. Maybe it's the new firmware?
any updates ?
Mine prints and has been.
Excellent! Solution makes difference. Thanks so much.
So, if I do not reset the counter on my samsung m2020 I can keep printing until all the toner is used up and the prints fade?
That is correct. The M2020 doesn't stop you from printing even after the low toner light comes on.
i have an M2020w and i can't print cause of the toner low alert -_- how can i disable this ?!
Thete is a software to disable it. I wish I knrw where to get it.
Thanks alot, but i have a problem after refill. texts sometimes dark black and sometimes light , black, please help me
Does this method work with the newest M2022_V3.00.01.11 firmware installed? Thank you.
Hello, I have a question. Why in other videos they usually take apart the whole cartridge? Your method seems much faster, even with having to pierce through the cartridge. I wonder if I don't replace the chip this method will work on my M2020? Thank you.
Complete disassembly and reassembly is not necessary for DIY refilling. Obviously poking a hole is not pretty, and so it would not be appropriate for a professional refill shop to do to customers' cartridges, but for a home or office refilling their own cartridges, this method is perfectly acceptable.
As for the chip, indeed, on the M2020, the printer never stops printing, so even though the cartridge will always say "empty" and produce the toner empty light, the printer will still work.
Hi guys ! I was wondering which toner powder should I get to refill these 111S , I did some research but I'm kinda lost ...
Thank you very much
I was just thinking of buying a laser printer and choose samsung 2020 but I only use ink printers
your video helped me a lot and it's very simple and easy :)
only one question, Does the refilling amount print about 1000 sheets like the original amount or less?
thanks in advance :)
+hager mekkawy Our toner bottles are filled to the same capacity as an MLT-D111S cartridge, so 1000 pages.
Many thanks, this is really useful.
One question though, I have toner powder for ML-2010, is this something that I can use in my SL-M2070W machine as well ?
Thank you.
+Needz I would advise against this. Each printer has different parameters for toner particle size and melting temperature, and it is important to match these. Also, the M2070 uses a lot less powder than the ML-2010, so there is a risk of overfilling. At InkOwl, we use different toner bottles for every toner refill kit we produce.
All printer manufactures OUGHT to produce ink & toner cartridge with REFILLABLE HOLE. It would greatly save the environment by reducing waste + saving consumer of unnecessary $$ spending which in turn WILL BOOST their printers sale
What is the tool that making the hole
i already have 3 soldering irons.. is the diameter of the hole crucial or as ling as the tip if the tonet bottle tou sell will fit? thanks
+Sam Sung The diameter is not critical. If you use your soldering iron to carve out a circle to pour in the toner, that will work!
Anyone know a USB Print Server to this M2070 who will be work with printing and scanning ?
I have a M2070, When i check System Setup > Maintenance > i don't see the "CLR Empty MSG" option..... Where do I find it?
Is your printer currently printing? If yes, then keep on printing until it stops, then the option should appear.
I followed all the refill instructions but the printer shows "Replace new cartridge'. It will not print. Any advice??
Please try the following:
- Turn off the printer
- Turn it on. It will show "Replace Toner / Stop".
- Press the right arrow to show "Continue" and then press OK.
You should be able to print after this.
hello, i have a m2070fw. but i can't see "CLR Empty MSG" at the maintenance menu. help me please
what did u do bro, i want to buy this printer
What do you call that tool that pierces through the cartridge? And where can I buy one?
Called a "Toner Holemaking Tool". It is available on our website: www.inkowl.com/laser/laser-refill-tools/hole-in-one-toner-cartridge-hole-making-tool-120v-for-north-america/P241/
What is the name of the instrument used to make holes in the tonner?
Never mind, thank you!
Iam interested to make a order i don`t see where to continue
You can order from www.inkowl.com
any advise on 2026W? all the same? 45g and ignore empty cart error? same toner?
+deividas267 Hi there, yes it's the exact same deal!
i like your think
What do u called in the ink ? Wat brand
InkOwl toner available at www.inkowl.com
So, for there is no need to reset or change the chip for MW2022w? Some other sources are telling me it is necessary.
+David Vidrman For the M2022w, it really is not necessary. The toner low light will remain on at all times, but the prints will come out, and that's all that counts!
Then how do i know when does the toner finish?
Did you uninstal the driver for prineter or not? My is on 10% now but maybe if it reach 0% software will prevent it from printing
is it useful for samsung xpress ML2020w? is it necessary that replace or reset to chip?
Yes, this method can be used for the M2020w. There is no need to replace or reset the chip. The printer will simply keep printing indefinitely.
I just ordered toner to refill my Samsung MLT-D111S. I understand that buying a larger (non spade) drill bit to make a hole will likely cost more than the melting tool. I happen to have many larger drill bits. I would of course drill a pilot hole first. Is there any downfall to doing it with a drill bit? If not, what size would it take? Thanks!
The hole size is 5/8". However, we absolutely cannot recommend this. The reason is that if any little plastic shavings made during drilling remain inside the cartridge, the drum will be damaged with use (little nicks and scratches) resulting in a gradually deteriorating print quality. If you must use an electric drill, do be sure to thoroughly empty the cartridge to eliminate all plastic shavings (and old toner).
Thank you. I heated up a hot pipe with a torch and melted a hole. Worked perfectly. I emptied the little toner that was remaining and put in the new toner that I received from you last week. It prints fine. The only issue that I have is that I do not have a "CLR Empty Msg" option under "Maintenance". I tried to turn off Toner Low messages, but it doesn't work. I still continue to get this message. Is there a way to clear the message? or will it just keep working and Ill have to look at this message for the next 2000 papers that I print (I bought 2 refill bottles from you)? Thanks
The message will always appear, but the printer will allow you to print. Which printer model do you have specifically?
inkowl.com Okay. That's fine. It's the Samsung M2070. I figured maybe they updated their firmware because they want me to pay $50 for their cartridges. I can live with the warnings. Thanks for the responses.
On the M2070, they did, changing the menus a little bit. Don't worry about it though, since it'll always let you print.
I used your toner refill for quite a while with no problems. I printed maybe 200 pages. My Samsung M2070W will no longer print. Samsung is outsmarting us. I get an error message on the printer's LCD screen that says "Replace New Cartridge". I can turn the printer on and off... doesn't work. If I pull the cartridge, I will sometimes be able to get one item in the queue to print. There is a site (ereset.com) that will write custom firmware to eliminate the error messages, but Samsung recently blocked the ability to pull CRUM info in order to have this firmware rewritten. Now, unless I buy a Samsung toner cartridge, I cannot print. Any suggestions? Will replacing a chip on the side make a difference? All this is changing so rapidly. I bet that as soon as we find a way around things, the greedy people at Samsung are trying to figure a new hurdle for us to overcome. Thanks
For reasons yet unknown, a small minority of customers on the M2070 series experience this issue. Where, they have to periodically (sometimes quite often) remove the cartridge and reinstall.
Try the following please:
- Remove the cartridge
- Reinstall
- The printer screen should say something along the lines of "Replace Toner / Stop"
- Press the right arrow to change that to "Continue"
- Press OK
If it becomes a real problem, it is always possible to return any unused products to InkOwl, contact our customer service at info@inkowl.com for details.
ereset.com fixed my issues. I can now refill toner cartridges and not have to mess with chips or whatever. It has been working for 3 months s far.
hello, please what's the name of device used in 0:26 ? and what's the name of paper used in 1:06 ? .. sorry my english listening is not that good. Perú.
+ferchho The device is our InkOwl Toner Holemaking Tool, and the tape is simple aluminum duct tape (it's included with the InkOwl toner bottles)
How many pages can be printed with the 45grams toner?
About 1000 pages at 5% page coverage, just like a brand-name MLT-D111S cartridge.
i did everything like you did and i used the right toner but the result is a faded pages it good be better .. can u help?
What toner did you use? With this cartridge, as long as a toner for Samsung printers is used, there shouldn't be a problem.
is there a difference between toner powder for other samsung laser printer? or are they the same?
Most Samsung monochrome printers use the same black toner formula. The color printers, on the other hand, use a distinct black formulation.
How many grammes of toner in the bottle?
For SAMSUNG 111, the fill amount is 45g.
Thank you it worked
I just renewed the toner of M2020w. Lets see how it will work.
Hm, I dont know if this is a problem but I used universal powder for brother and the result was none. Does anybody know what is the difference between the powders of different producers and if it has any importance?
+Jakub Krejci Indeed, the toners for different printers are distinct and cannot be interchanged. The key differences are the toner particle size and the melting temperature. Using an incorrect toner can cause problems, up to permanently damaging the cartridge and printer. How is your printer working now? Let's decide on your next step!
any kind of refill powder is ok?or must be a known brand>
+fnajafi Different printer models use different toner formulations. It is very important to match the toner melting temperature, particle size, and chemical composition. As such, it's not so much the brand that's important, but verifying that the toner is certified for use in your printer model. Of course, a trusted refill brand will give you more confidence that this is the case.
give you give me the url link to buy the refilling kit for M2020W printer tonner MLT-D111S (111S) ?
+JIANG J www.inkowl.com/?p=product&product=7646
where can I get refill kits in india
Tengo una impresora Samsung Xpres M2020w, cuando regrese de viaje imprimí unas hojas y desde entonces imprime como si una termita hubiese construido su casa en la impresora.
Quisiera que alguien me pueda brindar alguna ayuda y a que se podría deber esta situación.
It does not work ... the toner would stop after few pages. reboot printer would work for several pages, then stop. super annoying ! samsung 2070fw
nice thanks for sharing
hey inkowl how many times can I refill the cartridge until it wears out????
About 5 times
thanks for the enlightenment
Tried today, working good (Y)
Can I use plastic tape instead of duct tape?
I wouldn't recommend plastic tape, as it may not be airtight. You really need an airtight seal or toner will definitely leak out out as the printer prints. Duct tape really is best, and is included with every purchase of an InkOwl refill kit!
where do you get the kit from?
www.inkowl.com/?p=search&q=mlt-d111s
is this work for samsung m2026w ?
+rug town Yes it does!
please hom many grams i have to put inside of? do you know?
+Emerson Martins This cartridge requires 45 grams of toner.
+inkowl.com thank you so much! I gonna do it
All are ok but wast powder how to remove Catrage
On this model, the waste toner hopper is ample enough that there is no real need to empty it regularly.
Thank you
Thnx alot man
Do you have a store in the Philippines?
No, we do not, unfortunately. We can ship to the Philippines, but it's expensive so it's not worth it for this type of cheap black toner. I'm sure you will be able to find something local!
Sad 🙁 well im afraid of trying locals without any positive feedback coz i might end up damaging my printer. And i was thinking your toner has some specific similarities to the original thats why it worked(?) or any black toner would do? thank you so much for your reply.
Mavic Ricafort Our toners are matched to the original in terms of particle size and melting temperature. So, no, not any black toner will do. Look for a reputable supplier that has different products for each printer. Avoid any supplier that sells kits "universal" to many different printers.
+inkowl.com Hi i found this online store Galleon.ph they claim to sell things not available in the Philippines. and this toner cartridge is available at their site. do you happen to know them?
No, I do not. Sorry.
thanks!
ราคา
Empty out the old toner LMAO its IMPORTANT .... no its not XD you just throw money away lol
Give link for the boxs refill and for the hot metal
You can order all our products at www.inkowl.com
hello, i have a m2020w. but i can't see "CLR Empty MSG" at the maintenance menu. help me please
+Mariano Fernández With the M2020w, there is no need to do anything to get the printer to work on your refilled cartridges. Simply keep printing!