10:45 - Couldnt complete the circular pattern here. SW wrote: "Only merging features may be patterned. If appropriate, make a pattern of bodies instead." Tnanx for you exercises and hard work!
Nishant bhai hamaisha ki trah complex design select kya app na aor bohat asan laga daikhnay maien agar meray jaisay ko bana padh jay demagh ghoom jay. Simply superb . 🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲 👌👌👌👌👌👌👌👌👌👌👌👌👌
Well, unfortunately in this case, the circular pattern failed. I can only guess that it's because of my version of SW (2015) is just not up to it. I followed your moves exactly, bu the circular pattern reports: :" Cannot get a point on the path to start with. For an open path, the path must intersect with section plane." What path? Which "section plane"? -I think it just gets confused by the geometry. Oh, well, I'm retired now, and can't really afford to upgrade, so I'll just have to be happy with all the great models that I HAVE been able to create from your wonderful podcasts.
It's giving error about the section plane on which you make the circular cross-section for the sweep command ( to make the first cylindrical spoke) Because SW 2015 doesn't support sweep boss with inbuilt circular cross-section Thanks for your query Happy Modelling 🤗
@@EasyCADSolutions Thank you so much for explaining the error! With that explanation in mind, I made my "DNA spoke" using a revolve command instead a sweep so that I would not need that plane that was confusing the program. Not only did it work after that, but it was able to make that circular pattern in about 12 seconds (rather than 2-3 minutes). I appreciate you taking the time to read comments and jumping in to help someone who's having trouble! You are the best! 👍🏻👍🏻
In mobius it is twisted to 90 degrees of whole. So half must be 45 degrees and in order to add more twist i added 1 complete rotation So total would be 360+45
sir, I had a problem: " unable to create the instances of the pattern, try to decreasing the number of instances or the distance between instances".Could you tell me what should I do to fix that? Thank you very much, you just blew my mind.
i cannot create a reference point when selecting a point after creating an axis. they both intersect I don't know what is going on,. I followed the video exactly
My solidworks is not adding the variation to instances. Every single one of the 99 instances is still at 45 degrees. I follow the same instance angle and number and vary angle. Edit: I found the problem. mid point in sketch 3 has to be piece relationship to sketch 1.
You just blew my mind, great job my friend!!
Thanks for watching 🙏🏼
Happy Modelling 🤗
10:45 - Couldnt complete the circular pattern here. SW wrote: "Only merging features may be patterned. If appropriate, make a pattern of bodies instead." Tnanx for you exercises and hard work!
Make sure to make the sweep without merging it and then try the same
Nishant bhai hamaisha ki trah complex design select kya app na aor bohat asan laga daikhnay maien agar meray jaisay ko bana padh jay demagh ghoom jay. Simply superb .
🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲🤲
👌👌👌👌👌👌👌👌👌👌👌👌👌
Thank you Saqib Bhai🙏
how does one come up with something crazy like this!!! Bravo!!!
Thanks 👍
I want to ask one queation.?
what is the purpose of (405*4)/99 and also (360*2)/99 .?
Secondly; what is the main idea of instance.?
This is nice. It's easy to do every time. But its depend how you have that sketch to revolve. Thank you.
Yes, Exactly 👍
BUENIZIMO GENIAL . REALIZADO GRACIAS
Thank You 👍
Awesome. Can you also please explain the equation's logic?
Whenever i make the next video related to this, i will surely explain this
Thank you !!!
Welcome 😊
nice work bro
Thanks 🙏
Incredible👍👍👍👍
Thanks 👍
_Make a Fix constraint to get a fully defined sketch_ . Thank You! That's something that's always bugged me about using SW patterning tools.
Welcome and Thank You for Watching 😊
Very good 👍
Thanks 👍
Well, unfortunately in this case, the circular pattern failed. I can only guess that it's because of my version of SW (2015) is just not up to it. I followed your moves exactly, bu the circular pattern reports: :" Cannot get a point on the path to start with. For an open path, the path must intersect with section plane."
What path? Which "section plane"? -I think it just gets confused by the geometry. Oh, well, I'm retired now, and can't really afford to upgrade, so I'll just have to be happy with all the great models that I HAVE been able to create from your wonderful podcasts.
It's giving error about the section plane on which you make the circular cross-section for the sweep command ( to make the first cylindrical spoke)
Because SW 2015 doesn't support sweep boss with inbuilt circular cross-section
Thanks for your query
Happy Modelling 🤗
@@EasyCADSolutions Thank you so much for explaining the error! With that explanation in mind, I made my "DNA spoke" using a revolve command instead a sweep so that I would not need that plane that was confusing the program. Not only did it work after that, but it was able to make that circular pattern in about 12 seconds (rather than 2-3 minutes). I appreciate you taking the time to read comments and jumping in to help someone who's having trouble! You are the best! 👍🏻👍🏻
Great 👍
If you have any queries than feel free to comment.
I will explain as best as i can
Keep Learning, Happy Modelling 🤗
is it possible to do something like
"Mechanical Sculpture Asinas II - Jennifer Townley"
? Thanks
I think, it's possible
How you get the ideas of process of every product design
It's about practice and observation.
The more you observe the more you get something new
how did you measure 360+45
In mobius it is twisted to 90 degrees of whole. So half must be 45 degrees and in order to add more twist i added 1 complete rotation
So total would be 360+45
tek kelımeyle harika
Thanks 👍
sir, I had a problem: " unable to create the instances of the pattern, try to decreasing the number of instances or the distance between instances".Could you tell me what should I do to fix that? Thank you very much, you just blew my mind.
It's a complex geometry so while making circular pattern you need to tweak the instance angle and increment angle wisely
i cannot create a reference point when selecting a point after creating an axis. they both intersect I don't know what is going on,. I followed the video exactly
Please mention the the time frame as well
My solidworks is not adding the variation to instances. Every single one of the 99 instances is still at 45 degrees. I follow the same instance angle and number and vary angle.
Edit: I found the problem. mid point in sketch 3 has to be piece relationship to sketch 1.
Okay, if you still have issues kindly mention it here i will explain it as best as i can
Thanks for watching 🙏🏼
❤️❤️❤️
👍👍👍
DESCRIPTION LINKS NOT WORKING
Thanks for letting me know
I will fix it as soon as possible
Links are fixed
Ufu