RESTORATION Ship Lamp 1945s - 🔧 Broken and Rusty 🔨
HTML-код
- Опубликовано: 4 июл 2024
- Restoration of an old ship's lamp from 1945s. It was not an easy restoration. The ship's lamp was badly rusted and damaged. The grid was badly rusted, so I made a new one. So that the ship's lamp gets an even more beautiful lock, I have the lamp on an old wooden board complained. I hope you liked the video. if so, then load a like there.
=============================
My Tool 🔧
Drill: a-fwd.to/1twEbtN
Dremel: a-fwd.to/4mPX0Em
Ratcheting Wrench: a-fwd.to/4Q61uS2
Sandpaper: a-fwd.to/5xQxldc
Hammer Drill: a-fwd.to/76hQ7D6
Circular Saw: a-fwd.to/7B12mce
=============================
Social Media:
My Instagram: / mw_restoration
My Facebook: / mwresto
=============================
Paint:
2k primer (Mipa)
2k Black Color
Harder
Paint gun 1,3mm jet LVLP
Primer mixing ratio 10:1 by weight
Black Color 3:1 by weight
=============================
Time stamps:
00:00 Introduction
00:14 Disassembly
02:02 all parts disassembled
02:17 Washing
02:27 Sandblasting
03:32 Repair the glass
04:56 Create a glass grid
05:41 Welding glass lattice
06:44 Paint
07:48 Make wooden board old
07:10 Clean and polish tires
07:54 Build signal lights
09:14 Free the lamp holder from rust
09:48 Build metal plate
10:00 Reassembly
12:32 Completely restored Truck
=============================
=============================
Special info:
Lamp: Gift from the friend 0€
Duration of restoration 10 hours
Video cut 6 hours
=============================
#Restoration
#Lamp
#Rusty
=============================
Music:
When I'm gone by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_when-im-gone
Music promoted by Audio Library • When I'm gone - LiQWYD...
=============================
Omega by Scott Buckley / scottbuckley
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/omega-scott-buckley
Music promoted by Audio Library • Omega - Scott Buckley ...
=============================
while it's a nice job, I feel like you made a couple of errors. The inside of the lamp should have at least been painted silver or chrome, or been highly polished to reflect light. black does the opposite. Also, use an LED or curly florescent bulb in it, you get more light for less juice and less heat. also, the wires should be in a conduit pipe to continue the look. On a ship, all the wires are in conduit, even back then. Helps reduce the risk of fire and sparks. It seals not only to waterproof, but to contain the heat and sparks say if a bulb blows. a painted piece of PVC pipe would do for the conduit, since it only has to look the part.
I would also like to add that the ring holding the glass in place looks extremely rough. I would have grinded it more as long as it didn't compromise its strength; even welding the voids if you want to go all the way :)
@@eduardolarrymarinsilva76 yes, there are always choices and compromises. Since it will not see actual duty ever again, I think the solder is fine. The brass ring, well I think it looks about right. Nice but not too nice. Still looks old, and that's a good thing. A brighter light might make it more useful, thus the suggestion of LED or florescent. The suggestion about the pipe or conduit is just to go with the theme, not that it's really needed.
@@tootall5559 I'm not sure we are speaking about the same thing. I wasn't talking about the way the wires over the glass were attached, but the fact that the main ring that is actually keeping pressure of the glass, looks very badly dented, when it could have looked better by some grinding. I understand that not all of the dents can go because it would compromise its strength, I'm saying that superficially grinding would have made a lot of difference, at no high price.
Later I said that he could put welds on the voids of the ring so it can be "whole" again. But that requires more work, hence why it made sense to omit it, in comparison to the surface grind.
But if I must comment on the use of solder, not only is it ok, it would have made sense even in the original context. Those crossbars are merely cosmetical: a way to indicate to repairman that the fastener is in place at a glance and making it harder to lose. If those bars ever broke, using solder instead of welds would have a lot simpler and hence preferable, since they aren't supposed to sustain mechanical stress.
Hope I have explained myself better :)
@@eduardolarrymarinsilva76 well I'm not getting that good of a look at that piece, I guess.
Needed to have an earth too.
But, nice job - would be expensive to buy in a light store.
I absolutely love the way you film and edit your videos 👍👍👍
Great work guys! It came out awsome!
ALL OF A SUDDEN YOU'VE GOT THE THIRD HAND !!! AMAZING .. BY THE WAY , I ADMIRE YOUR CLEAN AND SUPERB WORK .. CONGRATS ...
👍👍
That... is... awesome!
Love the finish on the wooden plank. Bet that smells amazing. I love that smell of burning wood. Nice. Good job
I love this piece!!!
This is done really well ... your production is perfect ... superior audio as well I have to add ...
thanks 😁
Nicely done
Amazing and inspirational
Beautifully restored, yet it leaves me with the vaguely sad feeling that this may be the last surviving piece of the ship it was attached to. 🥲👍
Awesome job.👏👏
Hi bro 👋👋👋 very good restoration ship lamp 👍👍👍
Nice job 👍🏻👍🏻
This guy really blewwww it out the “water”😉😀😂
Ich denke ich kann in deutsch schreiben: Super, Super, Super.
Es macht einfach Spaß dir zu zuschauen! 🤗👍👍👍👍👍👍👍👍👍👉🏅
Danke 🙏
Ps. Komme aus Deutschland 🇩🇪 😁🤫
NICE make over !!! Where did you find the Lamp ??? Did You get it off Ebay ???
A excellent job keep making your videos
A good idea
Everything the others said rings out true, especially if you look during disassembly the interior lens is silvery to begin with and the conduit pipe would have looked more correct. But over all enjoyed the video.
👏👏👏👏
only thing I would have added is a brass plate with the name of the ship or boat it came from if you new the info
Shut be paint White inside ?
БРАААВО!!!!
Weder Zugentlastung noch Erdung!? nocht schön gemacht, da fehlt doch was
Legal.
Наверное ты не очень понимаешь для чего отражатель
Да, недочёт пооучился.
Но думаю её дальнейшая жизнь будет в виде экспоната.)
There should be an earth cable to the metal body of the lamp.
1) this item doesn't appear to be properly earthed
2) did you check to make sure that E27 lampholder was wired correctly...?
As they're polarity sensitive and potentially dangerous if not wired correctly...
🇬🇧👍
Я не могу. Этот припадок стекло отпескоструил.
Да еще ОТРАЖАТЕЛЬ покрасил черным.
L'intérieur d'une lampe en noir ??
This lamp is 74 years Old.
Чёрный отражатель в плафоне ... что, правда???
Very nice job ! The same quality as Tysy Tube or My Mechanics. Subscribers will follow ...
Can you restore my marriage?
🔨😂
MW Restoration is that a yes? Not only restore my marriage but my family. My wife cheated and took everything including the children.
1945s isn’t a thing there’s not 2 1945s it only happens once
РУКАЖОП....
Да он точно Ф-О-К-У-С-Н-И-К ?!!