There's a problem sir, When the slave FF is on, it will take input from Qm at J and Qm' at K. so then it will either act as Reset or Set (depending on the initial input - 1 or 0). So it may change the master's FFs output.
I hope so you will reply to may question... I have seen in lot my notes that AND gates are applied to SR flipflop instead of NAND gates... So sir Which one is correct ????
Why should we use negative edge triggering?? As we use both +ve and -ve edge triggering for the output of master and slave jk ff respectively, so why will we use that???
सारे यूट्यूबर ने केवल उपर उपर समझाया है की रेस अराउंड को रिमूव किया । किसी ने भी सर्किट डायग्राम में वैल्यूज रख(0 और 1) कर नहीं बताया। जो किताबो में सर्किट दिया है nand gate वाला मास्टर slave wo value rakhne par perform kaise kar raha hai।।
sir J and K ko ANDing ke through connect krna hota h...u connect them directly .. is problem ko thik kriye sir this is SR FF ....not JK.. correct it sir
I couldn't even understand neso academy video but your is more understandable thank you so much
Thanks for the concern
You Accurately Explained the point everyone fails to express , Simply Awesome
Because of you I am able to pass DE PAPER VERY easily
SIR, Only because of you I can understand the concept of MS JK FF. Thanks alot SIR 👍🙏🙏
maine youtube pe jitni video thi sab dekh dali master slave pe par kuchh palle nhi pada ... par apki video se hi sab samajh aaya. Thank you.
Adesh Paul thanks
Thankyou very much.. Ur explanation is very easy and simply.. Once i see ur video the whole concept get encapsulated in my mind... Sir u r legend
Really you are awesome!!!
Your lecture helps me lot to understand digital electronics.
Thank you sir!!
The way you teach is awesome sir.
Literal "The Best" explanations! Thanks Sir
Tq sir, outstanding teaching style
❤❤❤
Excellent explanation. Thank you so much. I watched about ten videos, but this is perfect and up-to the mark.
Sir your explanation is awesome !
#Thank you very much for
your this type nice explanation
as well as your step by step collection of
video are really awesome !!!
Good job sir..you lecture is Very easy to understand
Nice explanation sir
Nice explanation
very nice lecture sir 🙏🙏🙌🙌
Legend hats off sir❤️
Very nice sir 🎉
sir please rely
is master slave combination always equivalent to negative edge triggering please reply
There's a problem sir,
When the slave FF is on, it will take input from Qm at J and Qm' at K. so then it will either act as Reset or Set (depending on the initial input - 1 or 0).
So it may change the master's FFs output.
Osm among all channels
Thanks sir for this video 👍
very well explained sir.
sir where is video on shift resisitors
Sir video khatam hone ke bad sirf board ko show kijiye screenshot lena rehta hai
I hope so you will reply to may question...
I have seen in lot my notes that AND gates are applied to SR flipflop instead of NAND gates...
So sir Which one is correct ????
Sir today my exam I prepare all long question for your video in lock down sir please pray for me for giving best paper and also pray for my friends.
All the best 🌹 💐 😊
Thanku sir❤
Thank you sir
You can do it
@@thouseefshaik2294 lod
Sir, but i don't get VIDEO on PLD
so, i request you to please try to make
video on that topic, if possible !!!
sir this was only used to overcome the toggleing property please tell me sir
Nicely explained sir, please make video on Moore, Mealey
ok
Why should we use negative edge triggering??
As we use both +ve and -ve edge triggering for the output of master and slave jk ff respectively, so why will we use that???
sir,how is it JK flip flop when the output of slave flip flop is not connected with its input so it acts like SR flip flop
Output is fed back to the input of master. Please check.
@@TechGurukul yes sir but what about the input of slave
Super
Thank you very much
Sir we were told to use JK flip flop as Master and SR flip flop as Salve.
Please explain
No. Not possible in this structure. When inputs are 1-1 then the state of SR FF is prohibited.
Sir registers ke video aur upload kr dijiye please!
Master slave flipflop is level triggered know?for edge triggering why should we use master slave ff, we can simply used edge triggered jk ff right?
why Qm is becoming 0 on another edge ?
Arpit Dhamija because 1st FF will be off at that time due to clock pulse
Thanks sir
Dil se dyanwad 😊😊
Sir counter ka lectures nhi kya
Very soon
Thanks sir jldi bta dijiye
सारे यूट्यूबर ने केवल उपर उपर समझाया है की रेस अराउंड को रिमूव किया । किसी ने भी सर्किट डायग्राम में वैल्यूज रख(0 और 1) कर नहीं बताया।
जो किताबो में सर्किट दिया है nand gate वाला मास्टर slave wo value rakhne par perform kaise kar raha hai।।
Value put karke samjhoo sir jii
sir J and K ko ANDing ke through connect krna hota h...u connect them directly ..
is problem ko thik kriye sir
this is SR FF ....not JK..
correct it sir
Truth table to btai nahi
Same as JK flip flop
Sir register ki video Nahi h??? And if lectures are very usefulll
manish gupta very soon
Legend watch one day before exam😮😮😮
Ultra legend watch before some hour of exam 🌝🤣
👌👌👌👍
👍
sorry to say but you didnt explain very well. disliked
Bahut boring h yaar ye😭😭