Knocking, Detonation and Pre-ignition [Engine Combustion Working Animation] Lecture by Shubham Kola

Subject - Power Engineering
Chapter - Knocking, Detonation and Pre-ignition in engine cylinder
Timestamps
0:00 - Start
0:08 - What is Knocking, Detonation and Pre-ignition
0:19 - What is Knocking
0:33 - What is Spark Plug
0:45 - Reasons that cause knocking in engine
1:23 - How to prevent knocking in engine
1:40 - What is Pre-ignition and its causes
2:09 - How to prevent Pre-ignition in engine
2:19 - What is Detonation and its causes
3:02 - How to prevent detonation in engine
3:10 - Difference between Knocking and Detonation
#Knocking_Detonation_Pre_ignition
#Engine_Combustion_working_animation
#Power_engineering
#Single_Cylinder_four_Stroke_Engine
#Internal_Combustion_Engine
#Mechanicalengineering
#GATE
#Mechanicallectures
#Mechanical_Engineering
#shubhamkola
This Video Topic is from Power Engineering Subject, you can also watch below mentioned videos related to Power Engineering Subject:
Carnot Cycle - • Carnot Cycle Working A...
Otto Cycle - • Otto Cycle Working Ani...
Diesel Cycle - • Diesel Cycle Working A...
Dual Cycle - • Dual Cycle Working Ani...
Brayton Cycle or Joule Cycle - • Brayton Cycle or Joule...
Knocking, Detonation and Pre-ignition - • Knocking, Detonation a...
Supercharger and Turbocharger - • Supercharger and Turbo...
Multi Point Fuel Injection (MPFI) System - • Multi Point Fuel Injec...
Turning Moment Diagram (TMD) for Single Cylinder Four Stroke Engine - • Turning Moment Diagram...
Valve Timing Diagram of 2 & 4 Stroke Petrol [SI] & Diesel [CI] Engine - • Valve Timing Diagram o...
Valve Timing Diagram of 2 Stroke Petrol Engine [SI engine] - • Valve Timing Diagram o...
Valve Timing Diagram of 2 Stroke Diesel Engine [CI engine] - • Valve Timing Diagram o...
Valve Timing Diagram of 4 Stroke Petrol Engine [SI engine] - • Valve Timing Diagram o...
Valve Timing Diagram of 4 Stroke Diesel Engine [CI engine] - • Valve Timing Diagram o...
Engine Terminology - • Engine Terminology: St...
Morse Test Procedure - • Morse Test Procedure |...
Heat Balance Sheet of Engine - • How to draw Heat Balan...
Catalytic Converter (2 way and 3 way) - • Catalytic Converter Wo...
Intercooling, Regeneration, Reheating in Gas Turbine - • Intercooling, Regenera...
Turbojet Engine and Turboprop Engine - • Turbojet Engine and Tu...
Ramjet Engine - • Ramjet Engine Working ...
Derivation of Ideal Gas Equation - • Ideal Gas Equation Cra...
Gas Laws: Boyle's Law, Charles's Law, Gay-Lussac’s Law and Avogadro's Law - • Gas Laws: Boyle's Law,...
Entropy And Enthalpy - • Entropy And Enthalpy: ...
Thermodynamic Processes: Isobaric, Isochoric, Isothermal and Adiabatic process - • Carnot Cycle Working A...
Your Queries :-
What is Knocking and its causes
What is Spark Plug
How to prevent knocking
What is Pre-ignition and its causes
How to prevent Pre-ignition
What is detonation and its causes
How to prevent detonation
What is the difference between Knocking and Detonation
Faculty - Shubham Kola ( BE Mechanical Engineer )
Email ID - [e-mail]
From - Maharashtra ( India )
RUclips Channel ( Shubham Kola ) - / @ifinfotech
Disclaimer -
video is for educational purpose only. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favour of fair use. The content in this video is collected from books, media, internet space etc. This is strictly for educational and information purposes and is not intended to be advice or recommendation of any kind whatsoever. The faculty is not a subject expert. The faculty is sharing his knowledge in the form of videos. The faculty giving small basics information on mechanical engineering topics. We endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the video or the information, related graphics contained in the video for any purpose. any reliance you place on such information is therefore strictly at your own risk. In no event will we be liable for any loss or damage without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arise out of, or in connection with, the use of this video.
(*The music used in my video, is not owned by me!*
Source*RUclips Music Library)

[@itsjustbonnie6418]

you know your staff amazing video

[@assortedexorcist2645]

the explanation is better than my auto prof in college

[@Swift_Suzu]

Easy to understand

[@user-sd3we7jv3d]

Thank you sir

[@ErRonak]

Sir, why is spark plug is near inlet valve?
Actually in one of state board asked question for location of spark plug and given answer was near inlet valve,
So what's the reason sir?

[@DonnieDeLo4577]

Been having knocking, ended up having my timing too advanced, put some 93 in and tuned timing back to normal and it’s all good now. Still light ping/knock but it’s getting better

[@mabeltimas1254]

Does it sound like a rod knock though? Did u try using octane booster?

[@manishnegi762]

Amazing..👏👏

[@ifinfotech]

Thanks a lot 😊

[@justinhare905]

Well explained

[@ifinfotech]

Thank you so much😀

[@Ajith.Gowda_123]

Sir can u please send this topic notes

[@veenascreativespot]

thx...

[@ifinfotech]

You are most welcome🙂

[@Ajith.Gowda_123]

Hii sir send PPT of this video

[@darkhat1743]

Gttc students 😂😂

[@hosamelayeb]

plase ppt file

[@heyfarhanirfan]

❤

[@heyfarhanirfan]

😊

[@heyfarhanirfan]

🎉

[@heyfarhanirfan]

😮

[@heyfarhanirfan]

.

[@RodCastanedacom]

Maybe subtitles? Your accent is way to harsh

[@jeevanshahithakuri2057]

Yo Man your explanation sucks. Seriously you just give same explain for all with different ways. Please double check cause and remedies, all sound same with different sentences