*IMPORTANT:* The Success ratio of this method is 90% , few LCD are not working. Please Please Please make sure to *backup* your important files or do this experiment in a fresh memory card. If you have any *questions* please ask below , Check out New *Raspberry Pi 3 Tutorial* for Beginners: ruclips.net/video/0084bZfQG3k/видео.html 😍
something went wrong when i restarted raspberry pi, the screem stills write and i cant code, when i plug off the source and plug in it stills write, What shold i do?
Yessss!!! I can work with my R-Pi-3 B+ with 3.5" LCD with touch functionality. Thank you so much... For being so clear and to the point to get this working...
I would like to personally thank you for making this process as simple and as easy as it could possibly get!!!! YOU ARE SIMPLY AWESOME FOR MAKING THIS VID!!!!!!!! I cannot thank you enough!!!!!!!
Just installed in my RPI4 without problems. Really simple. I was afraid to loose the VNC desktop connection, but fortunately it still works. Thanks for all!
It just downloaded the codes then froze at the end. Doesn't recognize keyboard or 3.5 monitor, mouse. I unplugged it and powered back on several times only to see the couple pages of code load up and then nothing. Can't even reset or go to the menu fro retropie and raspian. It seems the sd card is corrupted somehow now and I can't get into the code because I dont have a device that can read/write on a sd that small, and the pie just freezes up on that downloaded code every time at startup. Any suggestions?
Is there any way you can make the LCD and HDMI port work at the same time? I was hoping to not have to go back and forth with code when wanting a small or big screen.
Super easy to follow your instructions and get the screen display to work. Once the Pixel OS displays, the screen doesn't accept any input and even using keyboard/mouse, the cursor won't move. Is there a way to code the display to mirror on HDMI output so that both screens are on at the same time?
Thanks for useful video, but I am wondering if Raspberry Pi can display on both 3.5 inch LCD screen and desktop monitor at the same time. Thank you in advance
Thank you! Worked 100% for first try... even i installed my screen before after a reinstall i had to do it again, so this was 1000 times less pain than before! TY!
Hi. I have manage to make my 3.5inches TFT screen working on a Pi4 but it's very small and impossible to reach all the button on the screen. I have tried to change the resolution but the screen doesn't change. Is there something in your script that force a specific resolution that would override the intended one ? I can't find anything, but you may tell us ?
Hi, do you have the schematics for this LCD? It claims it's SPI interface, but unless it's controlled through the touch controller, there's no SPI interface and the data lines of the LCD seem to be connected to binary ripple counters.
Hey, ah, the code to revert back to the external screen is only different by the last line "sudo ./LCD35-hdmi"... so to switch between the 2 (LCD screen & monitor), you only need to execute "sudo ./LCD35-hdmi" for monitor & "sudo ./LCD35-show" for the 3.5 screen?
is there any way to fix this screen so it shows the full desktop? I've tried everything and it seems to cut off about 1/4 of the screen. While not too terrible, it does affect some programs I try to run. The whole point of me getting this was so I could have a portable pi SDR, but I can't use some functions on the program in question because it cuts part of the screen off.
I have a question. I have raspbian Lite installed along with pi-hole. Now I want to show the chronometer auf pihole on the screen. However, following you steps, I only get a second input prompt for the user. How can I, connected via SSH to my raspberry, send a terminal window to the screen?
Thank you. This got my screen working in seconds, while I’ve been trying for days searching online with no luck. It really is super easy. However, is there a super easy way to uninstall it? Not revert it back to HDMI, or disable it, but completely remove the script, or completely undo what the script does? Thanks!
Out of curiosity, when the resolution is small like this, 320x480 or whatever, and you open up a GUI such as Raspberry Pi Configuration, how do you scroll to see all the options when there are no scroll controls on the window?
I did everything stated and the screen came on and I had the loading screen (startup) but after start up the screen is just black with a - dash at the top right hand corner... Any ideas what the problem is? I have a raspberry pi 4 which is comparable with the Kuman 3.5 lcd I’m trying to get to work, I was using a 7 inch HDMI touch screen monitor before
is it possible to use the screen with retropie? i want to have something portable to play on while im on my camping trip next month. thanks for the help!
Hi, I installed your drivers, but with retropies I had problems. I do not see emulators and game pages anymore. Is there a way to go back or to clear the LCD monitor drivers? Thank you very much
Hi, great video! Can you please do this for Ubuntu Server? I have the RaspberryPi 4, 4gb with Miuzei touchscreen 4.0 case and I installed Ubuntu Server 20.04 on it with GUI but I see only Blue screen blinking on the small screen. If I connect remotely with SSH, everything works perfect. Thanks.
sir, jo link apne dia hay desktop se lcd screen jane ke liya....agar main rasberry pi may kali linux install karu kya..usme vi oyi link kam aya ga...plss reply
thankyou very much. For those wondering the old Waveshare Rev A screens work with this. Thank you from Australia! I used to battle with these TFT screens years ago when they first came out!
I add a 3.5 lcd to retropie.I get this when the lcd is on. error parsing xml file"home/pi/.emulationstation/games/psx/gamelist.xml"no document element found. Any advice please
I know about UTFT library under arduino, but before purchasing any TFT from random website how I can be sure that this TFT is going to work with UTFT library, could you please help me with that. I am looking for 4.3 inch, 5 inch and 7 inch TFTs with resistive or capacitive touch.
Trying to install driver and get 3.5''LCD to work on latest raspbian, at first restart system hangs in i2c loading, then after disconnecting LCD, system loads, but of cause no hdmi desktop and no LCD, but accesible over SSH. Tried to get HDMI back by typing ./LCD-hdmi, but after loading HDMI Desktop noticed, that WiFi crashed, NO WIFI Please help!
hello man, thanks for sharing. but do you know how to revert them back to headless raspberry pi (connecting display using VNC Viewer but cant seem to connect)
Good night. does the arduino "ide" work on the 3.5 display? I installed but the system only opens when it is in the "HDMI" output. would have any solution? Boa noite. a "ide" do arduino funciona no display 3,5? instalei mas o sistema só abre quando esta na saida "HDMI". teria alguma solução?
Thank you! Simple and easy. I used a Kuman 3.5" touchscreen from Amazon with a RPI 3 B+, the only issue was although the lcd-show folder was clearly there, it wouldn't allow me to set permissions with chmod from the command line, I just skipped the part and was able to set the permissions later once I had the screen running.
when I turn off my pi the whole thing turns blank white but now when i have to turnn it off i have to put it back on to the monitor for it to re-work the 3.5 screen. (any suggestions on how fo fix?)
When i plug in the LCD and use the code the screen shows the homescreen but no input works (mouse, keyboard, stylist, touch) the mouse cursor just stays in the same place
very nice video well explained where to get the touch display to work is really not a big challenge ... but i'm looking for a way to use the 3.5 inch dsplay and my hdmi output at the same time i don't want to be on the all the time look small display !? I'm curious if you know something :)
hey man, i bought Raspberry Zero W and i bought 2 inch screen that has SPI interface. My question is - how do i connect display's SPI wires to the Pi board?
works beautifully..thanks but the image quality is not good. How do i fix that or how do I find the right driver? is there anyway I can look at the chips on the board and then can determine what drivers I need? Your method works perfectly. Also, what does this command do sudo ./LCD35 -show what its purpose?
When I use the command './LCD35-show' my pi reboots, but then I don't see the desktop, just the terminal, from which I can sign in and navigate the pi, but no gui or anything. I am using a Raspberry Pi 3 B with Kali Linux and the same 3,5 inch screen as you.
Tried and it's booting in the CLI. I can't get it to boot with the GUI even if I force it in sudo raspi-config. I do have xfce4 installed on raspian lite. Any ideas? Could that be affecting it?
Hey show after purchasing my screen I used your link and after the reboot it turned back on with the HDMI my touchscreen did not turn on and now it is telling me end kernel panic not syncing unable to mount root on unknown block can you help me I did everything the exact way you explained it in your video but it's just not working and now I'm stuck on the code screen
Thanks it worked My one is the touchscreen but the touchscreen functionality won’t work on it what is the command line so I can get the functionality for the touchscreen to work
If i have not any hdmi display then? If i buy new raspberry pi with 3.5 inch lcd monitor then it will automatically support or i have to plug my pi to any other hdmi monitor.
Hi mate, another great video by you. Thanks for your help. I really appreciate the effort you go to to make these video to help people such as myself. Regards Dave.
didn't work for me. I'm running the latest version of raspbian with recommended software and when it reboots it runs through all the logs and then freezes on "starting dhcpcd on all interfaces" and the display stays white and I have to re-flash raspbian. please help
hi, when i run lcd-hdmi on mine, i get an error. it does not work in hdmi anymore once i install the lcd software. once i revert back to hdmi it doesnt work on the screen or hdmi
Hi, I saw your video on RUclips and tried to follow your directives to install LCD touch screen on my Raspberry. my problem is when I try to get the clone img on GitHub.com the server ask for user ID and password. Could you share the corresponding info in order to complete my install Thanks Wil
it is not displaying on either sceen now! do i need a different screen? it had a different pin layout, but in the description it says it will work with any screen.
Hey I'm new to this stuff and I love your videos I must say you kinda inspired me to get in to pi's but I'm trying to do a SD card reader for looking at my wildlife camera but couldn't find any videos on that
Sir, I want to know if Rpi will switch to HDMI out every time it reboots or will it remain in GPIO pin display unless changed? Also, will it work with Rpi zero? Thanks in advance.
I have tried various ways and this way worked thank you very much. HOWEVER LOL the mouse is opposite to where my finger is any idea to get it the right way round?
Hey man nice video for raspbian is very good and almost the easy way.. But when i install double boot raspibian configure lcd and then install retropy trought berry boot or inside raspbian... My lcd transfer in hdm and show 4 color red jellow blue and green and no boot. Img WHAT IS WRONG..?? * LCD SAME YOURS pls help.. I wont to realize microcomputer and game console or with your other video like double frame or with possibly to switch hdmi to lcd for more portable usage.. Help.
hey i need some help, please i did everything has u told. i copied the code u gave and pasted it everything went well but after rebooting my both 3.5 display and HDMI went blank and i tried turing it off and on but no use can u help me pleasse........
*IMPORTANT:* The Success ratio of this method is 90% , few LCD are not working. Please Please Please make sure to *backup* your important files or do this experiment in a fresh memory card. If you have any *questions* please ask below , Check out New *Raspberry Pi 3 Tutorial* for Beginners: ruclips.net/video/0084bZfQG3k/видео.html 😍
TricK i Know what if I use the retropie operating system???
something went wrong when i restarted raspberry pi, the screem stills write and i cant code, when i plug off the source and plug in it stills write, What shold i do?
What if I just simply want to use it as a hdmi screen?
Like for my ps tv
Or other gaming consuls
Yessss!!! I can work with my R-Pi-3 B+ with 3.5" LCD with touch functionality.
Thank you so much... For being so clear and to the point to get this working...
I would like to personally thank you for making this process as simple and as easy as it could possibly get!!!! YOU ARE SIMPLY AWESOME FOR MAKING THIS VID!!!!!!!! I cannot thank you enough!!!!!!!
You are most welcome to my channel , have a wonderful day 😀
I've been trying to get this going all night, and this is the first guide that actually works. Thanks!
OMG! I'm completely new to this, but you just did in minutes what i've been trying to do for hours! Thank you!!!
I understand your feelings, for the first time I was just like you 😀
Thank you for this! I spent an entire evening fighting with the screen, you solved it in 4min!
Thank you for this. I Finally got an lcd I thought I would never get work to operate.
Clear, concise, and helpful instruction. Well done. Thanks!
Just installed in my RPI4 without problems. Really simple. I was afraid to loose the VNC desktop connection, but fortunately it still works. Thanks for all!
What a painless process. Works fantastic first time with no issues! Thanks
It just downloaded the codes then froze at the end. Doesn't recognize keyboard or 3.5 monitor, mouse. I unplugged it and powered back on several times only to see the couple pages of code load up and then nothing. Can't even reset or go to the menu fro retropie and raspian. It seems the sd card is corrupted somehow now and I can't get into the code because I dont have a device that can read/write on a sd that small, and the pie just freezes up on that downloaded code every time at startup. Any suggestions?
Very helpful, this was one of the best tutorials out of all the others!
Thank you so much for the compliment bro , have a nice day 😆
What if I just simply want to use this as a screen? More specifically the hdmi for my ps tv or other gaming consuls?
Is there any way you can make the LCD and HDMI port work at the same time? I was hoping to not have to go back and forth with code when wanting a small or big screen.
Super easy to follow your instructions and get the screen display to work. Once the Pixel OS displays, the screen doesn't accept any input and even using keyboard/mouse, the cursor won't move. Is there a way to code the display to mirror on HDMI output so that both screens are on at the same time?
Thanks for useful video, but I am wondering if Raspberry Pi can display on both 3.5 inch LCD screen and desktop monitor at the same time.
Thank you in advance
Thank you! A modern/recent video that helps me understand why my pi wouldn't work!
You are welcome ☺️
Thank you! Worked 100% for first try... even i installed my screen before after a reinstall i had to do it again, so this was 1000 times less pain than before! TY!
Hi.
I have manage to make my 3.5inches TFT screen working on a Pi4 but it's very small and impossible to reach all the button on the screen.
I have tried to change the resolution but the screen doesn't change. Is there something in your script that force a specific resolution that would override the intended one ? I can't find anything, but you may tell us ?
Hi ! Do you know where I can get a 3.5 inch protection ? Like a tapered glass one ? Can find 3 inch but not 3.5 inch... Thanks !
Hi, do you have the schematics for this LCD? It claims it's SPI interface, but unless it's controlled through the touch controller, there's no SPI interface and the data lines of the LCD seem to be connected to binary ripple counters.
Hey I had a question what if one needs to use the normal gpios for connecting motors n similar components even with LCD attached ?
Hey, ah, the code to revert back to the external screen is only different by the last line "sudo ./LCD35-hdmi"... so to switch between the 2 (LCD screen & monitor), you only need to execute "sudo ./LCD35-hdmi" for monitor & "sudo ./LCD35-show" for the 3.5 screen?
Hi, do you know if th2 I2C bus still works after installing LCD ? Thanks
is there any way to fix this screen so it shows the full desktop? I've tried everything and it seems to cut off about 1/4 of the screen. While not too terrible, it does affect some programs I try to run. The whole point of me getting this was so I could have a portable pi SDR, but I can't use some functions on the program in question because it cuts part of the screen off.
Thank You!!! This worked for me, you made this very simple!!!
Didn't work, now the pi won't show anything on the screen or my monitor
I have a question. I have raspbian Lite installed along with pi-hole. Now I want to show the chronometer auf pihole on the screen. However, following you steps, I only get a second input prompt for the user. How can I, connected via SSH to my raspberry, send a terminal window to the screen?
Thank you. This got my screen working in seconds, while I’ve been trying for days searching online with no luck. It really is super easy.
However, is there a super easy way to uninstall it? Not revert it back to HDMI, or disable it, but completely remove the script, or completely undo what the script does?
Thanks!
Out of curiosity, when the resolution is small like this, 320x480 or whatever, and you open up a GUI such as Raspberry Pi Configuration, how do you scroll to see all the options when there are no scroll controls on the window?
I did everything stated and the screen came on and I had the loading screen (startup) but after start up the screen is just black with a - dash at the top right hand corner... Any ideas what the problem is? I have a raspberry pi 4 which is comparable with the Kuman 3.5 lcd I’m trying to get to work, I was using a 7 inch HDMI touch screen monitor before
is it possible to use the screen with retropie? i want to have something portable to play on while im on my camping trip next month. thanks for the help!
Hi, I installed your drivers, but with retropies I had problems. I do not see emulators and game pages anymore. Is there a way to go back or to clear the LCD monitor drivers? Thank you very much
Thank you. You made it so simple. Works like a charm.
It worked I got my screen up and running thank you for the video.
Hi, Is it possible to do in a raspberry pi zero w, using the recalbox system of retrogames?
Can you make a tutorial about programming this LCD Touch screen 3.5 inch using Retropie and OSMC, please!
Hi, great video! Can you please do this for Ubuntu Server? I have the RaspberryPi 4, 4gb with Miuzei touchscreen 4.0 case and I installed Ubuntu Server 20.04 on it with GUI but I see only Blue screen blinking on the small screen. If I connect remotely with SSH, everything works perfect. Thanks.
sir, jo link apne dia hay desktop se lcd screen jane ke liya....agar main rasberry pi may kali linux install karu kya..usme vi oyi link kam aya ga...plss reply
Is there any screens with screw holes or something to stop the screen tilt when you press it
Thank you so much!! I wish I found this video first, it saved me so much time. hitting the subscribe button now.
thankyou very much. For those wondering the old Waveshare Rev A screens work with this. Thank you from Australia! I used to battle with these TFT screens years ago when they first came out!
WOW!!!! Everywhere else i've looked, the method was extremely complicated!!! Thanks a ton!!!
Welcome bro , watch my retro game console build video too: ruclips.net/video/RutipytKp0s/видео.html 😍
Can You still use GPIO PINES to connect at least one player for retropie with the screen installed?
I add a 3.5 lcd to retropie.I get this when the lcd is on.
error parsing xml file"home/pi/.emulationstation/games/psx/gamelist.xml"no document element found.
Any advice please
I know about UTFT library under arduino, but before purchasing any TFT from random website how I can be sure that this TFT is going to work with UTFT library, could you please help me with that.
I am looking for 4.3 inch, 5 inch and 7 inch TFTs with resistive or capacitive touch.
Trying to install driver and get 3.5''LCD to work on latest raspbian, at first restart system hangs in i2c loading, then after disconnecting LCD, system loads, but of cause no hdmi desktop and no LCD, but accesible over SSH. Tried to get HDMI back by typing ./LCD-hdmi, but after loading HDMI Desktop noticed, that WiFi crashed,
NO WIFI
Please help!
This is a nice tutorial, thank you! Is there a way to get a faster update rate on the screen?
hello man, thanks for sharing. but do you know how to revert them back to headless raspberry pi (connecting display using VNC Viewer but cant seem to connect)
Good night. does the arduino "ide" work on the 3.5 display? I installed but the system only opens when it is in the "HDMI" output. would have any solution?
Boa noite. a "ide" do arduino funciona no display 3,5? instalei mas o sistema só abre quando esta na saida "HDMI". teria alguma solução?
THANK YOU !! after ages trying to get my screen to work i simply followed your instructions and i am a happy bunny , subd
Thank you! Simple and easy. I used a Kuman 3.5" touchscreen from Amazon with a RPI 3 B+, the only issue was although the lcd-show folder was clearly there, it wouldn't allow me to set permissions with chmod from the command line, I just skipped the part and was able to set the permissions later once I had the screen running.
hey, I also want to use ultrasonic sensor for my project, is it possible to use it with the display?
Thank you for this video! very helpful... how do you connect via cell phone hotspot? thanks in advance!
Just what I needed, thanks. I bookmarked your blog.
is it possible to keep the hdmi port active while using the lcd so you can have dual screen?
when I turn off my pi the whole thing turns blank white but now when i have to turnn it off i have to put it back on to the monitor for it to re-work the 3.5 screen.
(any suggestions on how fo fix?)
Quick thanks from Finley, Australia. Followed your guide, job done. Working a treat. Cheers
Glad it helped, thanks for watching 😊
When i plug in the LCD and use the code the screen shows the homescreen but no input works (mouse, keyboard, stylist, touch) the mouse cursor just stays in the same place
very nice video well explained where to get the touch display to work is really not a big challenge ... but i'm looking for a way to use the 3.5 inch dsplay and my hdmi output at the same time i don't want to be on the all the time look small display !? I'm curious if you know something :)
Awesome video, very easy to understand. Worked perfectly. Thank you!!!
Welcome , subscribe my channel for more raspberry pi videos 🙂
hey man, i bought Raspberry Zero W and i bought 2 inch screen that has SPI interface. My question is - how do i connect display's SPI wires to the Pi board?
works beautifully..thanks but the image quality is not good. How do i fix that or how do I find the right driver? is there anyway I can look at the chips on the board and then can determine what drivers I need? Your method works perfectly. Also, what does this command do sudo ./LCD35 -show what its purpose?
When I use the command './LCD35-show' my pi reboots, but then I don't see the desktop, just the terminal, from which I can sign in and navigate the pi, but no gui or anything. I am using a Raspberry Pi 3 B with Kali Linux and the same 3,5 inch screen as you.
May be it not works with the kali linux os 😀
Tried and it's booting in the CLI. I can't get it to boot with the GUI even if I force it in sudo raspi-config. I do have xfce4 installed on raspian lite. Any ideas? Could that be affecting it?
Awesome this helped me get the screen working with the Raspberry Pi 3 B+!!
I just wanted to say thank you I do appreciate it
Hey show after purchasing my screen I used your link and after the reboot it turned back on with the HDMI my touchscreen did not turn on and now it is telling me end kernel panic not syncing unable to mount root on unknown block can you help me I did everything the exact way you explained it in your video but it's just not working and now I'm stuck on the code screen
Thanks it worked My one is the touchscreen but the touchscreen functionality won’t work on it what is the command line so I can get the functionality for the touchscreen to work
is there a way to do this on other operating systems as well?(such as retropi)
thank you very very much. Short, simple and easy to understand!
does this work with a pi 4 and the newest raspbian distro? also, will this code work for different sized LCD (TFT) displays?
the raspberry blocks when i put the codd and I lost my sd, my pc doesnt recognize it, did you happen to you?
Got mine up and working with this video thank you sir!
If i have not any hdmi display then? If i buy new raspberry pi with 3.5 inch lcd monitor then it will automatically support or i have to plug my pi to any other hdmi monitor.
would be nice to see an extension of this video whe you would have explained how to control backlight on this LCD
I'm using a class 4 memory card. My system got stuck. should I wait or should I turn off manually.
Man, you are the best .... this was one of the best simple video I have ever seen, well done you made my day finally something working :)
Thank you so much for the compliment, my good work will continue always 😀
Nice video if I want to plug to a 55 inch display , do I need to change the code ?
how to add the display on top of the pi,if there are some connections or jumper wires from the gpio pins?
Hi mate,
another great video by you.
Thanks for your help.
I really appreciate the effort you go to to make these video to help people such as myself.
Regards
Dave.
didn't work for me. I'm running the latest version of raspbian with recommended software and when it reboots it runs through all the logs and then freezes on "starting dhcpcd on all interfaces" and the display stays white and I have to re-flash raspbian. please help
hi, when i run lcd-hdmi on mine, i get an error. it does not work in hdmi anymore once i install the lcd software. once i revert back to hdmi it doesnt work on the screen or hdmi
Hi,
I saw your video on RUclips and tried to follow your directives to install LCD touch screen on my Raspberry.
my problem is when I try to get the clone img on GitHub.com the server ask for user ID and password.
Could you share the corresponding info in order to complete my install
Thanks
Wil
it is not displaying on either sceen now! do i need a different screen? it had a different pin layout, but in the description it says it will work with any screen.
After I have installed this, will it always output to the touchscreen no matter what sd card is being used??
I have question: could you tell me if is the way to shutdown only display. When I left only one pin 5V and reconnect I see only white screen.
Does anyone know if it is possible to have the HDMI and LCD working at the same time, as independent screens (not mirrored)? Thanks
Thanks for presenting in such an easy and humble way... let's connect :)
What os i canuse us there way to use windows 7 or windows 10 but tge ram was engaged too much
The touchpen is off, it seems to be rotated 90 degrees? (Moving the stylus right makes the pointer go up.) Any ideas?
This works great, thanks. One issue is my keyboard and mouse have stopped working - how do i get them to work as well?
Install the fresh copy of raspbian to fix your mouse keyboard problem 😀
Hey I'm new to this stuff and I love your videos I must say you kinda inspired me to get in to pi's but I'm trying to do a SD card reader for looking at my wildlife camera but couldn't find any videos on that
Sir, I want to know if Rpi will switch to HDMI out every time it reboots or will it remain in GPIO pin display unless changed? Also, will it work with Rpi zero?
Thanks in advance.
Worked for me, thank you very much TricK.
Welcome
I have tried various ways and this way worked thank you very much. HOWEVER LOL the mouse is opposite to where my finger is any idea to get it the right way round?
Hey man nice video for raspbian is very good and almost the easy way.. But when i install double boot raspibian configure lcd and then install retropy trought berry boot or inside raspbian... My lcd transfer in hdm and show 4 color red jellow blue and green and no boot. Img WHAT IS WRONG..?? * LCD SAME YOURS pls help.. I wont to realize microcomputer and game console or with your other video like double frame or with possibly to switch hdmi to lcd for more portable usage.. Help.
sir i want to ask, please reply.. from that waveshare lcd, can it run 60fps video on that little screen? thx
hey i need some help, please
i did everything has u told. i copied the code u gave and pasted it everything went well but after rebooting my both 3.5 display and HDMI went blank and i tried turing it off and on but no use can u help me pleasse........
Thanks! I guess I can get the 3b instead of the 4b now that i know the cheaper LCD's are compatible