I didn’t realise how big the do88 intercooler is compared to standard til watching this. Massive improvement and worth doing I think. Thanks for sharing your vid 👍
Another great video. The 3 LED sidemarker lights (North America) can burn out. The lenses are sealed and can't be easily repaired so I had to put a whole new lens assembly in this summer. If you know of any way to replace LEDs in the lens assembly, it certainly would save a lot of money. The TX has the aiming feature so they cost a lot when you have to replace them.
Oh amazing :) i'm planning for like a year on buying the kit, but i was a bit afraid of mounting it by myself (and because it's a bit pricey but the quality should be alright i hope) your video is just in time, thank you ;)
I nearly forgot that i have made a comment about your video already :D Hope you had no trouble with the pack, i had the kit installed by a workshop with good reputation, but sadly my do88 watercooler already cracked after 2 months installed...i don't know really what to do :/
Hey Jonas, Nice to se you going forward with your TurboX and cant wait till you make that yellow led side marks work! I was looking for info how to make them glow, but I couldnt find anywhere... my Car is from USA ... so will be doing same as you after you finish :D
Why does everyone install the DO88 IC but nobody installs the DO88 radiator? I mean you are already there and it is a huge improvement over stock. You also should have put heat wrap on the IC pipe that runs behind the radiator - it's so close to the exhaust and hot blowing rad air it just makes sense.
@@k_s.m The hose connections on the actual intercooler are both 63mm. The pressure pipe going from turbo to intercooler is 63mm in diameter, and the pipe going from intercooler to throttle body is 70mm in diameter. I hope that clears it up 😊
Я з задоволенням переглядаю твої передачі. Дуже повчально, в мене теж Saab 9-3/1 . Може щось буде в нагоді. Привіт з України, поки немає часу , б'ємо орків ( Russia). Після перемоги займусь.
Is that open air filter doing anything for the performance and acceleration? I understand the logic behind an open air filter so that you always will have cool air which will make the turbo having a faster response time.
Hi, Jonas the Saab emblem on the engine cover is dope!!!
Love it! Great video Jonas 😊
I didn’t realise how big the do88 intercooler is compared to standard til watching this. Massive improvement and worth doing I think. Thanks for sharing your vid 👍
78% bigger volume is quite alot 😉
The only drawback is that it's a tank! It weighs an absolute TON because it's cast aluminum tanks and not welded panels.
Great job, Sir. Thank you for posting. Now I'm with the DO88 website.
Thanks 🙏
Wow the pipes gave the engine a Great look. Good job man 👍🏾
Thanks 🙏
What a great looking engine bay. Top work!
Thank you 🙏
This is the best guy from Saab.👍🤩 Great job as always👍.
🙏🙏🙏
Nice! Looks great in the engine bay.
Another great video. The 3 LED sidemarker lights (North America) can burn out. The lenses are sealed and can't be easily repaired so I had to put a whole new lens assembly in this summer. If you know of any way to replace LEDs in the lens assembly, it certainly would save a lot of money. The TX has the aiming feature so they cost a lot when you have to replace them.
Beautiful work! This is what I needed to see to understand what I needed for mine. Awesome. Keep the videos coming!!!
That cat is a saab lover 😂💪😎
Nice video Jonas!! Great detail too!!
Thank you!
Jäkligt najs! 💪
Tack 🙏
Great video Jonas, amazing job for a amazing car.
You’re inspiring, Jonas! Currently planning to take my 2008 1.8t 9-3 to 300+bhp. Just need to upgrade the turbo, intercooler, downpipe, clutch… 😂
Oh amazing :)
i'm planning for like a year on buying the kit, but i was a bit afraid of mounting it by myself (and because it's a bit pricey but the quality should be alright i hope) your video is just in time, thank you ;)
It is a pretty easy job and well worth it 🙏
I nearly forgot that i have made a comment about your video already :D
Hope you had no trouble with the pack, i had the kit installed by a workshop with good reputation, but sadly my do88 watercooler already cracked after 2 months installed...i don't know really what to do :/
Contact DO88, I have never had any issues with their products
will do surely 👍🏻
👌👌👌 love it!
Hey Jonas, Nice to se you going forward with your TurboX and cant wait till you make that yellow led side marks work! I was looking for info how to make them glow, but I couldnt find anywhere... my Car is from USA ... so will be doing same as you after you finish :D
Pin 11 is us sidemarkers and pin 4 is the led strip which you take power from
@@JonasKakarikas that will helm me a lot! thank you!
Fantastiskt som vanligt!
Tack 🙏
Always find it funny how the euro guys want the USDM stuff, I bought euro corners for my '04 9-5 aero and '07 9-5 wagon because I hate the orange lol
Thats really Funny, how you always want what you cant get 👌
Längtar alltid efter dina videos. Härlig inspiration med dig som entusiast och superkunnig!
Tack Cg 🙏 härligt att du tittar in 😎
Why does everyone install the DO88 IC but nobody installs the DO88 radiator? I mean you are already there and it is a huge improvement over stock. You also should have put heat wrap on the IC pipe that runs behind the radiator - it's so close to the exhaust and hot blowing rad air it just makes sense.
Jonas, what's the inlet/outlet diameter? it's 2.75 (70mm) ? Do88 site doesn't provide this information...
63mm inlet/outlet on the intercooler and 63mm / 70mm for the pipes :)
@@do88performance ooh man, thank You for Your answer but I'm yet more confused :) What means 'on the intercooler' and 'for the pipes'?
@@k_s.m The hose connections on the actual intercooler are both 63mm. The pressure pipe going from turbo to intercooler is 63mm in diameter, and the pipe going from intercooler to throttle body is 70mm in diameter. I hope that clears it up 😊
@@do88performance Oh thanks! Now it's clear, hence the reduction in the kit...Thank you!
@@k_s.m No worries :)
Du skulle köpt do88 kylaren också
Livet är inte slut än 😉
@@JonasKakarikas sant
Det är verkligen trångt med V6an i 9-3an... Men blev bra. Hur mycket effekt/vrid klarar kopplingen?
Vilken PIN var det till Usa ljusen?
Original 450nm, vet faktiskt inte på xwd. Pin 11 USA markeringarna, pin 4 led ögonbrynet
Better drop those subframes and clean them up before its too late. Front is looking crusty.
Just a little on The surface, will get it fixed 😎
det var min far och Rulle som böt ic och turbo på min..Rip Rulle!
Я з задоволенням переглядаю твої передачі. Дуже повчально, в мене теж Saab 9-3/1 . Може щось буде в нагоді. Привіт з України, поки немає часу , б'ємо орків ( Russia). Після перемоги займусь.
Bilen blir ju bara bättre och bättre, samma med videosen :)
Tack 😉🙏
Is that open air filter doing anything for the performance and acceleration? I understand the logic behind an open air filter so that you always will have cool air which will make the turbo having a faster response time.
Mot really at these powerlevels, more like an cool sound 👌
You didn't give me a shout out! I gave you the link to the harness pin on IG
The Li k to the orio video? Did not show any pins