Full playlist of this project can be found here - How I build the Deck 12' x 20' ruclips.net/p/PL9fyWqL02lqkUWshlwsCqzBcRR8BEMETo You might be interested to see another project where I built a terrace a few years ago - How to Build a 30ft x 30ft Terrace (9m x 9m) ruclips.net/p/PL9fyWqL02lqnodlz3pzaFqXazV2XIfA0U Was used composite floor materials TimberTech www.rmfp.com/decking/composite-decking/timbertech-decking/
This is such beautiful work! It is too bad only a few select homeowners will truly appreciate and notice the extra steps and details in your work. Hopefully those are the ones that are hiring you :) Question: is there an advantage to laying your perpendicular picture frame board first and then all the rest of the in-fill boards later versus laying all the transverse boards first, then making one single straight cut across them all for a clean line, and only then laying down the perpendicular picture frame board against this line? Thank you
I think yes, it can be done and it will work. Only the first boards from the wall will have to be laid first, since then with a router you will not be able to remove the radius from the end of the board under the wall.
Fixed all series after 1st and 2nd part. Let the first two be with the word "step" 😉 Спасибо за улучшение контента. Английский у меня хромает. Он есть, но хромает (как говорил Винни-Пух 😁)
@ 4:30 you almost gouged your leg open and could have had severe cut by that blade. Jesus christ please be careful, that is the most dangerous tool safety I have ever seen in my entire life. 🏥🩸🩸🩸
You are right, this is not a safe way. But this is the only way in this section it can work perfectly and without distortions when cutting and hooking the casing on a sharp 45-degree angle of the board.
Full playlist of this project can be found here - How I build the Deck 12' x 20' ruclips.net/p/PL9fyWqL02lqkUWshlwsCqzBcRR8BEMETo
You might be interested to see another project where I built a terrace a few years ago - How to Build a 30ft x 30ft Terrace (9m x 9m) ruclips.net/p/PL9fyWqL02lqnodlz3pzaFqXazV2XIfA0U
Was used composite floor materials TimberTech www.rmfp.com/decking/composite-decking/timbertech-decking/
👍👍👍
This is such beautiful work! It is too bad only a few select homeowners will truly appreciate and notice the extra steps and details in your work. Hopefully those are the ones that are hiring you :)
Question: is there an advantage to laying your perpendicular picture frame board first and then all the rest of the in-fill boards later versus laying all the transverse boards first, then making one single straight cut across them all for a clean line, and only then laying down the perpendicular picture frame board against this line? Thank you
I think yes, it can be done and it will work. Only the first boards from the wall will have to be laid first, since then with a router you will not be able to remove the radius from the end of the board under the wall.
Thank you, nice to hear you like my work!
All these "steps" make me think you add a stair-step to your deck every day.
Do I need to change the word steps to something else?
@@FixitAll maybe -- part 1 of xx. Or just keep it to days. It just threw me off because you know decks have stair steps
Fixed all series after 1st and 2nd part. Let the first two be with the word "step" 😉
Спасибо за улучшение контента. Английский у меня хромает. Он есть, но хромает (как говорил Винни-Пух 😁)
@ 4:30 you almost gouged your leg open and could have had severe cut by that blade. Jesus christ please be careful, that is the most dangerous tool safety I have ever seen in my entire life. 🏥🩸🩸🩸
You are right, this is not a safe way. But this is the only way in this section it can work perfectly and without distortions when cutting and hooking the casing on a sharp 45-degree angle of the board.