Stick Welding - New Crane Stand on Mechanic Service Truck
HTML-код
- Опубликовано: 5 фев 2025
- I'm doing a ton of work on this service truck, and fixing up this crane stand is step one! I missed the before photos and a few videos I lost, but this is how I did it!
I recently found your channel.Glad I did, very enjoyable.You have a lot of skill.
Thanks and welcome!!
Nice work! It is always a pleasure to watch a talented fabricator!
Thank you very much!
I like the stick welding content. Lot of us don’t have the funds for expensive processes involving gas, etc.
I’m sure I’ll have more projects involving stick welding!
I love your variety of projects
Great job Rachel! I enjoy watching your creations, you are a very talented young lady. Keep them coming.
Thank you so much!
@@robertcheslock9636 thanks for watching along!
Don’t get me wrong Rachel, I really enjoy watching your talent welding and such. Running around in your‘little’ bibbers! Mine, not so little. lol. You are knowledgeable of the trade. Thx for your videos.
😊 thank you
As usual, excellent work Rachel!
@@kimvoss3479 🙌🙌 Thank you!
@rachelbohnet you're welcome!
Great Video I Love your channel and cant wait to see the rest of your truck build
Thanks for following along! I can’t wait for my truck build too !
Girl you are so talented!
Thank you!
Seeing you run your verticals from bottom to top tells me you have AWS knowledge. great job that boom ain't going nowhere, lol. Here's to you making some $, I hope it enables you to get back to your projects
Thanks! Lots of stick welding done in my day! Nice to come back to it for a bit :)
@@rachelbohnet I worked as a Weld Inspector a few years ago Shipyards do hear in the south. They always wanting and needing more Before it was Natural Gas Pipelines, a great group of people I assure you.
Nicely done, glad to see more women getting into this field of work. First time viewer, now sub'd. Cheers :)
Thanks for the sub! I appreciate it!
Отличные сварочные работы!
Классное, интересное получилось видео! Мне очень понравилось! Круто Круто!!!👍👍👍
Awesome watch, Rachel. You da bomb 💣
awesome project.....fyi the brush on rustoleum does great for that kind of stuff and no masking/overspray.
I will definitely give that a try! Thanks!
Nicely done!
Thanks!
AWSOME job. Keep up the videos
Thanks! Will do!
Farm rod always a good go too
Been around lots of service trucks over the years. the crane stand is problematic for several reasons, You did the right repair the right way looks great! issues with those cranes is the swing left to right worm gear and bearing teeth get worn and they just yank on the top of truck box going down the road breaking just about everything up there if you let them and they are not properly gusseted normally. adding the plate and the gussets only way to go the spec from IMT is crap for the swing left to right tolerance and normally if they breaking stands the bearing and base assembly is junk.the other issue is the operator the crane dose not have a down limit built in on that model and they will push and damage the box, down snug and stop that the way to roll. keep up all the good work. since that is a stepped top cabinet imt also has a repair to add a 1/4" plate too that transfers that down force inside cabinet at the step down in front of rear wheel not sure its needed if operator watching how much down force they are applying but if they wont stop that would be a good mod too and a must for guys that go on dirt and rough roads a lot. anyways got a subscriber out of it keep up all the great work.
New sub here love watching genius people working hard and inventing good stuff..cheers wishing you get more subs
@@Hybriddiag tree hanks so much for subscribing! I really appreciate! Hope you enjoy the content :)
Just stumbled on your channel and subbed, nice job, thanks for sharing 👍
Thanks for the sub!
Great work as always Rachel. You should really use a fresh air helmet though. Take care
Rachel , Purchase an Ingersoll-Rand needle scaler to chip the flux of your welds . It also cleans rusted surfaces . It operates very efficiently , wear hearing protection .
Remember carbon monoxide from welding with a gasoline welder in an enclosed area !
Yup,Miller makes the best rectafiers,- welders,nice running the 7018 up hill
Keep up the great work.😊
GOOD JOB!
Great welder fabricator and smokin hot
Well done.
Awesome beautiful
Good work did you drill holes in the tube bottom so water and condens can come out?
Yes I sure did:)
Rachel looks good. Did you have bevels on your gussets? Did you run root then stringers or just one bead? I’m with you on painting. Otherwise good job. 👏
Yes I did bevel the gussets and there is just one pass on there.
Good work as usual on both fabricating and video editing. You should really give more thought to respirators because of your children if not because of yourself. COPD is not pretty, and once you are in the habit of using a respirator or replacement air device you feel weird without it.
@@tmeinc I wear a respirator for longer jobs, but I do keep proper ventilation where I can fit the smaller things.
@@rachelbohnetGood for you wearing a respirator.
You tell em!
Hi Rachel 👋
Good job sweetheart
Rachael, what is a gusset?
Bon Boulo😆😆👍👍
💖
👍🏻
hey Rachel do you move that fast all the time????hahahaha
Pretty much! Haha
i wish u lived close to me i could use ya help building a winch bumper cause i dam syre cant see good enough to weld any more
It's strange that you don't work with an airstream welding helmet . Welding fumes are not healthy!
I don't feel like wearing a respirator when spraypainting my projects. Feel free to wear a respirator when painting _your_ own projects. How do you like _them_ apples? 😤🧐😂
Background noise took over the commentary at 5.33.
Yeah my editing skills aren’t that great. Haha
Hello frands,,iam mikhel,and my name professor welders,,and iam thanks be yours so much,,godbye again,
And just for you engginers,ilright welding underwaiter,,organitation iam from nation indonesia ,,i like vidio and photografer so much,but noting me have so live ,,godbye frands.
keep trying
a bit of a mess