this guy's video helped me so much. I wasn't able to understand this in school but with this tutorial I can now draw it like everyone else. TYSM and the haters can keep their opinion with themselves
For your comments and requests, please like, comment and subscribe in our Facebook page link down below. Thank you. facebook.com/naomi.akiradrawingchannel
Thank you so much!! Our teacher doesn't teach us clearly, after they teach us the lesson they don't even guide us on what to do next in case we forget the next step. Overall great video, keep gooooinngg!!!
I'm completely amazed 🤩🤩I wonder if you are not a robot, how perfect you explained in a very slow and organized manner. Even the dumbest person on earth can understand this . Thank you so much sir
Please help us and use the same figure, and show to us its othorgonal projection in the third angle. So that I can clearly differentiate between first and third angle
Good day Amanya! Thanks for the likes and comments. Sure, i will make another video using the same figure example in third angle projection. Dont forget to subscribe and share the videos please. Thank you and God bless.
I am a drafting teacher.the 3 views should be in an L shape formation.top view is above the front view.right side is adjacent the front view.the 45 degrees cross axis is at the blank quadrant.
Thank you very much, but it may interest me if you show us an example when The front view, top view and two sides (Left and right ) were asked to be drawn in 1st angel orthographic projection. Good evening
Good day Ibrahim. Thanks for the comment. You can check this link for the video of our 3rd Angle Projection. ruclips.net/video/em2tgRQxuhE/видео.html Thanks!
Hi Rana. First, it depends in the isometric figure. Second, it depends on which angle of projection you are using. In that video, I am showing you the First Angle Projection. I have another video showing the Third Angle Projection. Thank You.
How can I contact you? I need help with specific drawings(oblique,cavalier,isometric and parabola). I will send you all pictures and please make videos to draw them bro🙏
Sir, I really get confused when naming the front and side view . I always mix them up. Pls how do I know the front view and then the side view. Thank you
Hello! It's very easy. All you have to do is look for the observer. Where he is standing from, and where he is looking at. And the point where he is looking at will be your front view. Hope this helps. Thank you.
I really appreciate the effort put in making this video .I really learnt a lot although I thought if the object was face right th elevation will be left. I don't get pls explain
I love slow, straightforward tutorials like these. They are more accessible to ones who don't have a bright mindset of geometry and dimensions.
look at the front and side view
Pro tip, put the video speed on 1.25
Wow
Thanks
You mean 2x😗
Genius
Thanks
this guy's video helped me so much. I wasn't able to understand this in school but with this tutorial I can now draw it like everyone else. TYSM and the haters can keep their opinion with themselves
@@an5h1 thank you so much for your kind words. God bless.
@@3dnaomi ❤️
❤🤝👏👏👏
For your comments and requests, please like, comment and subscribe in our Facebook page link down below.
Thank you.
facebook.com/naomi.akiradrawingchannel
Straight forward for beginners, excellent work.
You are right a good teacher always go straight to the point
Our Facebook Page for your comments and requests.
facebook.com/naomi.akiradrawingchannel
Sr thanks you so much, Becouse of you I pass from 22% to 72%.
God is faithful 🙏
Wow! Great to hear that. Keep it up! Thanks!
good job
This is a great reply
You are intelligent
This video is very helpful for beginners. Thanks a lot!
Thank you from Nigeria
Thank you so much!! Our teacher doesn't teach us clearly, after they teach us the lesson they don't even guide us on what to do next in case we forget the next step. Overall great video, keep gooooinngg!!!
Thanks for your great comment. =)
either you speak Caribbean slang or your English just sucks.
Please keep doing this work , if you dont mind. It really helps out for students.
This is awsome. Brought back some memories.
Our Facebook Page. facebook.com/naomi.akiradrawingchannel
your drawing is incorrect dude
check again😒😒😒😒😒😒😒😒😒😒😒
I'm completely amazed 🤩🤩I wonder if you are not a robot, how perfect you explained in a very slow and organized manner. Even the dumbest person on earth can understand this . Thank you so much sir
Thank you so much. =)
I believed Technical Drawing was difficult but this video made it so easy for me so thank you so much and keep up the brilliant work.
Lies again? Online Reservations Cat Food
i have final exam tommorow in same subject... pray for me
@@markokraljik8162I will
@@markokraljik8162I hope you do amazing, good luck.
Thanks it will help for my big exam tomorrow 😊☺️
You made it easer for me as a beginner.Good tutorial
Thank you 😍
Nice job . I like how you didn't make it complicated like some other teachers.
Thank You 😍🤩
Yes you explained so well 👏
Your explanation is great 👍.....nice work continue teaching us plz 😊
Thank You.
Thank you, you are a good teacher
It behoves me to thank you coz it really helped , you can't imagine
This really helpful, God bless your work Sir❤
This is really helpful! thank you more power and God bless!
Thank you Yna! 🤩😍
@@3dnaomi You're welcome po :) this is great for me po since may prelim exam po kami dyan
@@3dnaomi may i know sir about your ruler? it's a kinda cool
It's rotring brand po. Eto po sa link. Thanks! images.app.goo.gl/uebmA1EsH7ZirQRM9
But reminders po, na this video is in 1st angle projection po. If jan po kau sa pinas, i think 3rd angle gngamit po jan. Salamat.
Wow! this was so helpful I thought it was hard
thank you so much sir i understood everything!!!
Superb skill❤
It's a really good tutorial Thank you❤
Thank you it really helps 🖤🖤
Thank u 💓 💗 ur tutorial is amazing
How nice you explain sir thank you,Godbless😇
Your smelly
Hello what kind of t square do u use?
I have a problem with mine
Because when i anchor the head to my Drawing board
The Ruler is a bit slanted
Hi there!
You may check the edge of your drawing board. Make sure it is straight and squared.
The brand is Rotring. It comes in a set.
Your explanation peerfeeect!!!😍😍😍😍
Thank You Rana
Please help us and use the same figure, and show to us its othorgonal projection in the third angle. So that I can clearly differentiate between first and third angle
Good day Amanya!
Thanks for the likes and comments.
Sure, i will make another video using the same figure example in third angle projection.
Dont forget to subscribe and share the videos please. Thank you and God bless.
Our Facebook Page for your comments and requests.
facebook.com/naomi.akiradrawingchannel
Thank you bro,u save me from my exam
I have got concept from this now may God bless you
Good to hear that Jacob. Great job! Keep it up!
Thanks alot you are a brilliant tutor
Thank you. Kindly share this to your friends. Dont forget to Like, Share, and Subscribe to our videos. Thanks!
Nee shuper adaa 🔥
wow this was soo nice have learn a lot
i love the way how u say 3.... sounds kindda funny at same time lul _trri_
EDIT: & also _tap view_ : D
I am a drafting teacher.the 3 views should be in an L shape formation.top view is above the front view.right side is adjacent the front view.the 45 degrees cross axis is at the blank quadrant.
Hello po. Kabayan? Pinoy ka po sir?
@@3dnaomi Anong angle projection po gamit nyo sa tutorial nyo po.?
@@leahjennikamontalbo7062 hello po. First Angle Projection po.
This is first angle projection .If you choose third angle then it’s the other way.
It was very very useful to me thanks ❤
I am so glad to hear this. Kindly Share this to our friends. Thank you.
God bless u sir and all tha gudness
Bro keep it you are a genius
Thank you. Appreciated big time 🤩
Thanks sir... Keep up on uploading more videos it's really helping us more.... 👍👍
Thank you. Please share. May i know from which place are you? Thanks!
Indeed it help a lot students👌
Easy to follow for beginners 👍
Thank You Simuwana. 👍😁
that's a 'set square' old bean, not a _triangle._
Also you can thicken the end of the dimension line instead of using an arrow.
Yh we know yr perfect
Thank you so much ❤
omg ur a life saverrrrrrrrrrrrr😊
Thank you this was really helpfull
Hi! Thanks for the comment. God bless. 😍
I love you, thank you so much Sir
Perfect, thanks.
sir i dint get the side view , howd it look like tat can u please explain me a little more
thx for this i really needed this for our tech draw
Thank you. Please like and share our videos.
Thank you from Kenya following
Great 👍
Keep going no of questions on orthographic 🥺
Really enjoying this lesson
Glad to hear it!
You are good❤❤
Please create a nice playlist and numbering the videos you will be the best🎉
Awesome
Is this a first angle projection?
Tnks sir, God bless you
does this apply for ISO standards(European)
Thanks for this 😁
How to draw the step thing
Wow so nice video
Many many thanks
Make videos for oblique and isometric. I am a great need
Sir very nice sir your tech my help eassly understand sir
Thank you Bharath 😍
what do you call to that triangle
that was amazing
Thank you. 😍
Thank you so much sir Jah Bless🙏🙏
Thank you! 😍 please share with your friends 🥰
Isn't the Front view meant to be at the right hand side not the left
Hi! Thank you for the comment.
The drawing is in the 1st angle projection.
Pls is this drawing in first angle projection
Thanks, mate 🙏
Thank you!
Our Facebook Page for your comments and requests.
facebook.com/naomi.akiradrawingchannel
Thank you very much 😊 sir
Hmmm, nice one sir
What angle projection is this first or third
First angle projection
Thank you very much, but it may interest me if you show us an example when The front view, top view and two sides (Left and right ) were asked to be drawn in 1st angel orthographic projection.
Good evening
Hi! Thanks for the comment.
Let's see if we can make another video tutorial on that. Thanks again.
Our Facebook Page for your comments and requests.
facebook.com/naomi.akiradrawingchannel
How can I get the same drawing equipment like the ones your are using?
Hi good day Ian.
The brand is Rotring brand.
You can order it online.
Thanks!
Thank you 💞 and please do this from LHS
Using the first quadrant, thanks
Good day Ibrahim.
Thanks for the comment.
You can check this link for the video of our 3rd Angle Projection.
ruclips.net/video/em2tgRQxuhE/видео.html
Thanks!
easy to learn
Thank You.
Is it the same way for all figures or it depends on the figure?
Hi Rana.
First, it depends in the isometric figure.
Second, it depends on which angle of projection you are using.
In that video, I am showing you the First Angle Projection.
I have another video showing the Third Angle Projection.
Thank You.
How do you draw this on your right
I need the drawing of An exact or approximate ellipse
nice work
How can I contact you?
I need help with specific drawings(oblique,cavalier,isometric and parabola). I will send you all pictures and please make videos to draw them bro🙏
I Can help you
I love it
I love it too
But when they are teaching me I'm in jss3 where the front elevation is there are lines and small strokes
Is it 45⁰ that is for first angle projection
Loveeeeeeeee❤️thank you
Sir, I really get confused when naming the front and side view . I always mix them up. Pls how do I know the front view and then the side view. Thank you
Hello!
It's very easy. All you have to do is look for the observer. Where he is standing from, and where he is looking at. And the point where he is looking at will be your front view. Hope this helps. Thank you.
Thank you!
Very nice
So good
Thank you 👍
Very helpful
#Recommended
Thank You! Please don't forget to Like, Share and Subscribe! Thanks!
my technology teacher forced me to watch this
it would be nice if you're using the faro arm with actual drawing 😸
I really appreciate the effort put in making this video .I really learnt a lot although I thought if the object was face right th elevation will be left. I don't get pls explain