@@Shanghai_Knife_Dude yes, I don't think it is a fix. But very interesting that you pointed it out. Is it a defect of some pens? Or is there a "proper" way of a justing the feed? As you pointed out in an earlier video.
@@dancrews7832 for this pen, it's absolutely normal when ink capacity is 20%-100%. It only plays funny when ink level below 20%. My guess: due to the large ink reservoir, air channel failed to pump in more air to maintain air pressure balance. I don't see it as a defect. Also, be careful, my other video is a permeate fix when you are 100% sure the ink channel too narrow, otherwise, you end up with a flooding pen.
@@Shanghai_Knife_Dude I found this video that may shed some light on our issue. Perhaps a bubble gets stuck at the base of the feeder? ruclips.net/video/VEUzd0E6k0Y/видео.htmlfeature=shared There is a second part that suggests using a drop of soapy water in the ink to help break the water tension of the ink and let the bubble rise out of the channel easier..
Not a big issue really. The flow issue only appears when ink level goes below 20%, which could also be easily solved by adjusting the converter. Again, this pen is too cheap to deserve a complain 🎉
You are funny man I have two of these pens one with a F nib and the other with M and they are bothe very wet and seem the same not fine for sure just too wet and thick
I like your style Dude
I have exactly the same problem. Thank you very much for showing it on your video.
I twist down the converter to eliminate the air inside. But I don't have a lot of experience. I really like your channel! Keep it up!!!
Yes, could try next time.
I tried, it actually helped a bit. Mostly it did is pushing the residential ink into feed.
@@Shanghai_Knife_Dude yes, I don't think it is a fix. But very interesting that you pointed it out. Is it a defect of some pens? Or is there a "proper" way of a justing the feed? As you pointed out in an earlier video.
@@dancrews7832 for this pen, it's absolutely normal when ink capacity is 20%-100%. It only plays funny when ink level below 20%. My guess: due to the large ink reservoir, air channel failed to pump in more air to maintain air pressure balance. I don't see it as a defect. Also, be careful, my other video is a permeate fix when you are 100% sure the ink channel too narrow, otherwise, you end up with a flooding pen.
@@Shanghai_Knife_Dude I found this video that may shed some light on our issue. Perhaps a bubble gets stuck at the base of the feeder? ruclips.net/video/VEUzd0E6k0Y/видео.htmlfeature=shared
There is a second part that suggests using a drop of soapy water in the ink to help break the water tension of the ink and let the bubble rise out of the channel easier..
I like this knife dude
Thank you I will try EF
@@johnjoyner8172 ruclips.net/video/eGWZW8ucSwc/видео.htmlsi=MHRRFAi67_LOU4R1
I was suprised there is an ink flow problem from the converter... I thought the larger converter they made looked like a huge step up for people.
Not a big issue really. The flow issue only appears when ink level goes below 20%, which could also be easily solved by adjusting the converter. Again, this pen is too cheap to deserve a complain 🎉
Does this happen ifcyou use a nib from the X159 model?
You are funny man
I have two of these pens one with a F nib and the other with M and they are bothe very wet and seem the same not fine for sure just too wet and thick
@@johnjoyner8172 try jinhao ef next time， so fine like a needle.
Part 2
ruclips.net/video/-3IUm_OHeoA/видео.htmlfeature=shared