C 7 Corvette Stingray Front Splitter (Aero Kit) Installation!
HTML-код
- Опубликовано: 31 дек 2019
- Today, we continue installation of the aero kit for a C 7 Corvette Stingray. 2014-19 Corvette C7 Stage 2 Front Splitter Lip
VEHICLE TYPE: 2014-Present Corvette C7 All Model
PACKAGE: Z06's Z07 Stage 2 Performance Package
COMPONENT: Carbon Fiber
SURFACE FINISH:
Carbon Fiber / Carbon Flash (Metallic Gloss Black) / Primer Black
PACKAGE INCLUDED:
Corvette C7 Stage 2 Performance Front Splitter Lip
Compatible with Corvette C7 Stingray / Z51 / Grand Sport / Z06
The Corvette C7 Front Splitter is manufactured by following the ASTM Durability of Nonmetallic Material Standards. In order to reduce the chance of crack and break, Reinforced Carbon Fiber and ABS plastic was used to produce unique parts that are more durable than other comparable products.
Corvette C7 Stage 2 Kit.....extremeonlinestore.com/produc...
Corvette Mods....www.corvettemods.com/C7-Corve...
ACS Composites.......acscomposite.com/products/acs...
Also available on Amazon...www.amazon.com/s?k=c+7+corvet...
McKees 37 Sio2 Polish....www.mckees37.com/ceramic-seri...
TAC Systems Coatings....www.tacsystemusa.com/
apexautodetail.com www.apexautodetail.com/
The ACS Z06 & Grand Sport Aeropack offers savings by bundling a series of aerodynamic components (Splitter, Deflectors, & Rockers). Multiple variants of the Aeropack are available including 3 paint finishes. ACS components are designed to improve airflow around the Corvette and enhance its aggressive stance.
#apexautodetail #c7corvette #c8corvette 
Авто/Мото
I will get back to product testing soon. Needed a break from ceramic waxes! :)
Apex Detail take your time!. quick question, in your opinion, what’s the best ceramic coating kit any non professional detailer can buy?
Apex Detail You always need to step away for a bit and do something different.It helps your mind and changes the same old repetitive daily grind. I enjoy seeing these different types of videos.💎
Cool.
alberto
very nice
Got into detailing after loving to wrench & work on my car.
Seeing a detailers approach to these installs is changing the way I work on my own car.
Brian, you make fantastic content.
Brian, you make it look so simple! Great job!
thanks Brian. Liked the tip to cover the end of the screwdriver with a paper towel just in case it slips.
Yes, I liked that too!
REALLY A HARBOR FREIGHT DRILL
Never dies....works great.
What a car &your so careful how you approach job love the tissue on the screw head to avoid scratching.lets see a side shot of the motor .
Looking great B. The Vette will certainly get them wet.
It's coming out fantastic Brian! I am truly happy for you. I hope you take the time to really enjoy it when the weather improves!
Car looks AMAZING Brian! You are doing a fantastic job! You must have ice water running through your veins due to all the patience you have with the small details like those screws! I probably would have been saying words I don't wish to repeat when doing the tedious work like that! lol
Brian, enjoying the transformation of the Corvette with the spoiler package. Looking forward to the addition.
You make it look so easy!
Wow!! Awesome job!!!
Looks good! Great work!
Wow! Great info! Super informative!! I also love ❤️ my vette! Detailing and working on it! Detailing was the main reason for watching your Vlogs! But the vette content is fantastic
I really like seeing these types of videos.Excellent video the car is really coming together like a diamond 💎 I bet junior wants to drive the beautiful C7 🤔I really am protective of my Camaro SS and my son is learning to drive. I told him when he gets his license he can take it around the block with me in it.He said he is not comfortable because he knows it’s my pride and joy.
Thanks B. C7 looking good. Can't wait until you score a C8.
2023...the Zo6
The Corvette is turning out looking great! Its definitely in good hands and glad such a car didn't fall into the hands of someone less careful.I would also keep the wheels since the 5 spoke chrome wheels do look quite nice on it, only my opinion of course.
Car looks great 👍
My next project for my stingray is a front splitter as well but instead of drilling holes in to the winglets I’m looking into a epoxy option like EP30-4 just to give it that one pice look. If if fails I can alway run some screws into it.
Looks GREAT!
Beautiful Corvette, we are getting the new Corvette here in Australia this year factory right hand drive... with a retail price of between $150,000 and $170,000 AUSD it's way out of my price range but I'm looking forward to seeing it.
Like the graphics at the end
You always need a little time to play with your toys enjoy!😜😜😜👍👍👍🔔🔔🔔
Happy New Year 2020💪🚘
HAPPY NEW YEAR BRIAN TO YOU AND YOUR FAMILY AND SISSY
Aggressive😎
Try using Rivnuts (Threaded Inserts). The C7 is looking good👍👍
AWESOME!!!! Too bad there isn't a better way to attach the winglets than those screws just my thought. That car is AWESOME
Great job. What size bolts did you purchase for the side winglets please?
Looks great Brian! I have my C6Z lowered as far as it will go on the factory bolts. I bought the CF ZR1 splitter for mine, but I don't think it would last a week was the factory chin gets scraped up almost weekly as it is!
I bet...it is only 5 inches off the ground to begin with!🙂
I've checked every local hardware store and can't find Iodized Black Bolts and Nuts used to install your side winglets. Where did you get yours?
Can you tell me where did you get the black screws and bolts from for the side front splitter you didn't list it thanks
I just installed the same kit. Side skirts, spoiler and front splitter. Was wondering why you didn't use the pre-drilled holes and bolt the splitter directly onto the bottom of the front bumper? They lined up perfectly. All you have to do is removed the 7mm screws on the bottom of the front and then bolt the splitter directly to the underbody of the car. Then add the self tapping screws for extra security. If the tape fails or the self tapping screw comes out with vibration over time then you risk the front splitter falling off.
The holes were a little off after lining it up...the sellf tappers will be replaces with rivets after z06 grill is installed.
Hello, can you please tell me what type , size model etc. self tapping screws did you use? and also where did you buy the front splitter from. Thank you.
Are the aero front and rear spoilers, side skirts your using the one from Extreme Online store?
Excuse me mr. Apex, when I buy the front lip splitter from eBay! Does it come with those two thing already? 5:09
Can you tell me where did you get the black screws and bolts from for the side front splitter and size
That is one beautiful machine. Added any power mods in the future?
Yes....Whipple charger and much more.
Corvette Time
Do you plan on blacking out the side markers and any window tinting?
Yes....much more to come.
What kind of double-sided tape did you use?
Liked everything until the winglets. My personal feeling is the screw heads look cheap and take away from the clean look. But thanks for the install video. Well done.
What size bolts did you use?
what manufacturer is the splitter?
#1
I took mines off. Was tired of it scraping out off my driveway
You tell ur helper next time not to remove the red top plastic off of the two sided tape ,,live it just when his ready to stick it for good ,,, I bit that side of tape didn't stick to the splitter is dome to do that!
get that car on a lift Boss!! ;-)-
Using rivets is it very unwise idea, everything I have on my Corvette is screwed in, and I use double sided tape. The reason you do not want to use rivets is because rivets is more of a permanent fix, what if you go down the road and something hits your front diffuser, now you have to drill out all those rivets, when all you had to do before was just take your screw gun and unscrew all the bolts, leave it quick fast and easy for replacement. Rivets you have to drill every single one of them out and it typically leaves a larger hole. There's literally no reason to add rivets. Double sided tape, 3M 15 pound test weight, clean everything thoroughly, double side tape it, then screw it with hardware that comes with, you'll never have an issue I have never ever had an issue with anything I have put on my Corvette with it coming off on its own.
I'm not a big fan of Corvette Mods. They'll take your money and deliver the parts. If you have any issues or need customer service they leave a lot to be desired. Corvette Mods has good prices but their quality in my opinion isn't very good. Hope you have a better experience than I have!