Omg there are too many people complaining. Just watch the tutorial again. The tutorial really helped me a lot by showing me how to use new commands. Thanks
thank you so much sir... a person with little knowledge of rhino will require only commands not your audio.. sir you've done it very nicely.. thank you so much for your time...
Thank you for this! I didn’t even use the audio and yet it was clear to me. People just love to complain 🙂 Maybe if they know the basics of rhino they’d understand this
The guy really knows what he is doing with Rhino. Unfortunately, he has no idea about audio. Can't hear much and he mumbles a lot. Still, you can learn something by watching.
Nice lesson, thank you. Can you do same with t-spline crated snake's body? I mean tsPipe or something. Body will be more complex, and CLOSED. How is UVCurve will working then?
damn! use zoom extend to selected objects. You know your way around rhino, but it tooks you forever to do stuff with all those miss clicks, zooming, paning, etc
Hi Oscar thanks for the feedback its much appreciated, If you made videos back in those days you needed to minimise the screen to around quarter of the normal size hence all the panning and zooming . This was done so you could get a decent resolution in the video for RUclips. The recording software could not deal with full screen it also made things lag a lot, so it was difficult to work as normal and I always tend work in 4 screen maximising screens is for less able users but hope it helped you out anyway. Just a thought though, Its possibly not as painful as having to deal with disrespectful comments from the likes of yourself joking about cancer do me a favour and grow up, you never know you may be taken seriously.
I try to do my best but running the Galactic Empire,all these sith meetings to go to and the Rebel Alliance playing up I struggle for time to edit the videos but thanks for watching and may the force be with you.
I have problem stuck in the " flow along structure step", I have checked everything and previous steps plus also fitted the appropriate scale of texture objects into the UV Plane, still cannot figure out what's wrong with it.... Can any one help?? I checked my layers too, no problem in it
What is the problem ? its difficult to workout without a picture ,if you follow the command line it should help also check the rhino help videos they will point you in the right direction
Omg there are too many people complaining. Just watch the tutorial again. The tutorial really helped me a lot by showing me how to use new commands. Thanks
thank you so much sir... a person with little knowledge of rhino will require only commands not your audio.. sir you've done it very nicely.. thank you so much for your time...
Well done. Some of these rhino commands are out of this world
Thank you for this! I didn’t even use the audio and yet it was clear to me. People just love to complain 🙂 Maybe if they know the basics of rhino they’d understand this
Glad it was of some help!
THANK YOU VERY USEFUL
I thought i'd leave a big thank you word for coming back to this vid for the xxx time. one day I learn. Thanks!
Great tutorial, i loved it and it has improved on my skills in Rhino.
Thanks for the tutorial, this was very helpful. I managed to create a similar model, but I used corner-corner when generating the rectangular surface.
yeah I know,sorry ,you can read the command line in hd and full screen hope this helps
The guy really knows what he is doing with Rhino. Unfortunately, he has no idea about audio. Can't hear much and he mumbles a lot. Still, you can learn something by watching.
No problem :) you still managed to teach me a lot of things:) please post more
thank you it was VERY useful for me
Thank's a lot!
This is really helpful for a beginner like me :D
Really easy, thanks for share! New ideas to my next designs!
LOL. i suppose when u r creating a snake you need to speak like one to.
Yeah I enjoyed this vedio it was useful Good job Man keep it up
thank you, very helpful! i was trying to do it with closed curves and getting nowhere.
Flow Along Curve step didnt work for me. Followed everything exactly like in the video. What could have gone wrong?
THANKS A LOT josef1 , u r a lfesaver!!!
Thank u Josef .. it's so useful for me ..
Really good video, by the way, what laptop do u recommend to use for architectural studies? thanks a lot
holy shit, most annoying sound i have ever heard! but thanks
+Francisco Lazo no problem
Nice lesson, thank you. Can you do same with t-spline crated snake's body? I mean tsPipe or something. Body will be more complex, and CLOSED. How is UVCurve will working then?
can't tell what you did at 16:52 cuz the screen got cropped off :(
+Phan Mai Flow along a surface
docs.mcneel.com/rhino/5/help/en-us/commands/flowalongsrf.htm
damn! use zoom extend to selected objects. You know your way around rhino, but it tooks you forever to do stuff with all those miss clicks, zooming, paning, etc
and FFS.... maximize the viewport you are working on. Use lock and unlock more often. Getting somo sort of cancer while watching you.... it's painful.
Hi Oscar thanks for the feedback its much appreciated, If you made videos back in those days you needed to minimise the screen to around quarter of the normal size hence all the panning and zooming . This was done so you could get a decent resolution in the video for RUclips. The recording software could not deal with full screen it also made things lag a lot, so it was difficult to work as normal and I always tend work in 4 screen maximising screens is for less able users but hope it helped you out anyway.
Just a thought though, Its possibly not as painful as having to deal with disrespectful comments from the likes of yourself joking about cancer do me a favour and grow up, you never know you may be taken seriously.
great video but it would be better if you see it without sound...
WHAAAAAAT? What did he say!!!!?
why cant i press the base along corner
the loudest thing on your audio is your dam breathing! come on! fix your audio please.
I try to do my best but running the Galactic Empire,all these sith meetings to go to and the Rebel Alliance playing up I struggle for time to edit the videos but thanks for watching and may the force be with you.
+Renato García hey renato... Go fk yourself...
I learnt alot from your video! Good that you didnt care about the trolls :)
I have problem stuck in the " flow along structure step", I have checked everything and previous steps plus also fitted the appropriate scale of texture objects into the UV Plane, still cannot figure out what's wrong with it.... Can any one help?? I checked my layers too, no problem in it
What is the problem ? its difficult to workout without a picture ,if you follow the command line it should help also check the rhino help videos they will point you in the right direction
I was facing the same problem, if you draw a surface below the rectangle (the projected uv curve) you will be able to select and do the rest. :)
thank you!
you dont show thw tool bar... sorry
nice tutorial but i had to mute it and put some of my own music....
I can hardly hear a thing. I can't make out what you're saying at all.
How did you keep getting the point to show?
You can use F10 to turn on points and F11 to turn them off or config them to a different hotkey in rhino settings
Josef1cnc Also you can push Esc key twice to turn points off. Very useful
please can i import 3ds max to rhino
you really should see it without sound.
Mate, speak up. I feel like I've got you on my shoulder whispering in my ear..
Thanx
does it work on mac?
I think you will need Windows 7 64bit with BootCamp to run Rhino 5 on your Mac.If you check the mcneel website there is info on what you need to do.
thank you
Nice Video, but your audio can BARLEY be heard!!
Do you know anyway I can get Rhino for free online? ;]
there is a free trial at www.rhino3d.com
try kat.cr/. I downloaded one there.
he speaks to himself i think
ok?