Consider.... There will be exam in a 10 min... And i don't know how to find rank correlation.... But but but but..... I see this vdo... And bcm a thankfull for this person
the 6 is in a confusion state sir check it 2nd and 3rd steps in 2nd step 6 is multiplying with one term only but why did it multiplied with such a big term in 3rd step sir 🤣🤣🤣🤣🤣🤣🤣🤣
Correct, of course! This is applied when average rankings are assigned to repeating variables. If no variables are repeating, rankings are assigned normally without averaging! In this case, we use the formula R = 1 - (6(sigma D²)/n(n² - 1)
Brother 1st add that bracket 3*8+2*3+2*3 ...that gaves u 36 then divide this with that denomination 12.... What the answer then 3only ...so just add 3 in 41....it gaves 44 ..😊
Find the coefficient of correlation using pearson or spearman correlation test on the data of your own choice.. Plz sir mera person paper ye question kr k bta dein agr asa question ay to data b na ho to kesy krna own choice py
Hello sir . How to interpret the result after answer. Please reply . When question like this . Ques- calculate coefficient of correlation by rank difference method and interpret the result
Result interpretation; a higher value of R shows that the two people or rank assigning mechanisms are allocating alike ranks and there is a uniformity and consistency in the decision
Sorry sir But you have a mistake for replit rings 15 it is in 5 and 6 and 9 ( 5+6+9=20÷3=6.67) not 7 and 8 and 9 (7+8+9=24÷3=8 noooo it false ) My English not good but I try explain to you 😊 My respect for you
Answer would remain between -1 and +1. Ultimately you have to square the difference it doesn’t matter you take r1-r2 or r2-r1. You can choose to assign highest rank number to lowest value of vice-Versa it won’t impact the outcome until you follow same pattern of rank assignment for both the series
Thank you Sir,for helping me find the Rank.🖤
We can use formula of
rk = 1-6ED²/N³-N
(For easy/ short calculations)
Thanks sir it helped me in PG exam Statistics
All teachers are commonly used X Y But our legend teacher is used J1 J2. GOOD JOB 👌😁😁😁 I Think formula is wrong please check out 🙂
Thank you so much sir for this wonderful explanation 💞
Nice explanation sir tq somuch sir
Thank you so much sir by seeing r1 how to calculate ranks I got the total problem on my mind sir once again thank you sir!!
Thank you so much sir
for ({m1+(m1....)....})/12
it should be divide with 2
not 12....
Helped a lot for my exam sir
May I know why it's mentioned as +0.733 when the calculation come as -0.733
Sir apne (➖) minus sign D me galat lagaya hai but well explained 👏👏
Consider....
There will be exam in a 10 min...
And i don't know how to find rank correlation....
But but but but.....
I see this vdo... And bcm a thankfull for this person
Thank you sir
This is the best vdo for understanding spearmen's rank method👍👍
Thank you, Sir!
Formula is correct
Thankyou very much sir !! It's definitely will.help.on my exam !!
Awesome impressive,❤️
So nice of you sir💝💝💞💞💞💞tq so much 😘❤️💕 nice explanation
काफि अच्छा विवरण था। शुक्रिया!
Thanks for the explicit explanation.!!!!
I like your Explaination sir ♥♥♥♥ love from banglore🌹🌹
the 6 is in a confusion state sir check it 2nd and 3rd steps in 2nd step 6 is multiplying with one term only but why did it multiplied with such a big term in 3rd step sir
🤣🤣🤣🤣🤣🤣🤣🤣
thanks sir!!! this would verily help me❤️
excellent sir 🙏 it helped me at just before few days of starting exam
Thnk u very much sir😊🙏
There is missing big bracket after 6 in formula.
Sir do you have videos about multiple correlation
ruclips.net/video/Px35yG3mJIQ/видео.html
ruclips.net/video/zwF26bMStUo/видео.html
I understand your video as superblly thanking you sir 💕💕💕
Tq sir it really help me a lot 👍
Excellent explanation given by you!
Thankyou sir bs thodi confusion c clear hogi v
Wow. Well explained.
Please do a video on Simplex method for linear
Thank you sir where is continue this chapter sir
Thank you so much sir for this Video. 👍
Very thankful to you sir..... helpful vedio👍🏻...
In rank correlations 3 models is there plz explain 3 models
ruclips.net/video/TH_5zvLvklE/видео.html
well explained
Thank you very much sir
If the firmula of1- 6( Sigma D square)divided by n(n square -1) is applied ? ¡s it ok?
Correct, of course! This is applied when average rankings are assigned to repeating variables.
If no variables are repeating, rankings are assigned normally without averaging! In this case, we use the formula R = 1 - (6(sigma D²)/n(n² - 1)
thank you sirr mai bhul gyi thi apne yaad dila diya
thank you so much for this sir :)))
Jai Maa Saraswati 🙏🙏
Thankyou so much sir
Thank you so much ♥️♥️♥️♥️♥️
Tnks mama
How the formula comes up
egyankosh.ac.in/bitstream/123456789/20449/1/Unit-7.pdf
Thank you sir very helpful
Good explanation
Thank you, sir🙏
It literally, helped me a lot!
I didn't understand last calculation
Sir here aap ne R likha h? Jo nhi hota h p= formula hota h
Thank u very much
Nicely explained....👍
where did you get 44? The summation of D squared is 41, then if you add the m1 and so on is not 44
Brother 1st add that bracket 3*8+2*3+2*3 ...that gaves u 36 then divide this with that denomination 12.... What the answer then 3only ...so just add 3 in 41....it gaves 44 ..😊
Thnks sir.. Well explained❤
Thank you sir.
But last part I'm miss understand...
Which one
@@bksoam k
Why come in 44*6/990
Very good
Thanks a lots sir 🙏
Thank you sooo much sir
Thank you sir
Thanks a ton sir 🙏
Thanks a lot sir it helped me ❤
Thanks ❤️❤️❤️💖💜💖💜💜
thanks so much your video job
Tqq sir
its wrong why are you taking r2 -r1 when the formula is r1- r2
At the end u need to square the difference it doesn’t make a difference
At the end u have to square the difference hence it doesn’t make a difference
Find the coefficient of correlation using pearson or spearman correlation test on the data of your own choice.. Plz sir mera person paper ye question kr k bta dein agr asa question ay to data b na ho to kesy krna own choice py
It’s simple you can use the data I have used here
How is possible 8
Hello sir . How to interpret the result after answer. Please reply . When question like this .
Ques- calculate coefficient of correlation by rank difference method and interpret the result
Result interpretation; a higher value of R shows that the two people or rank assigning mechanisms are allocating alike ranks and there is a uniformity and consistency in the decision
❤❤❣
Thank ew😁🙏❤️
That helped a lot 🌸
Love you sir..💖
You're wrong with the final equation. There shouldn't be a division by 12.
Good job God bless you
Thnxx sir
To find out D = R1-R2 hoga sir ka ki R2 -R1
It doesn’t matter ultimately you have to square it
Sorry sir
But you have a mistake
for replit rings 15 it is in 5 and 6 and 9 ( 5+6+9=20÷3=6.67)
not 7 and 8 and 9 (7+8+9=24÷3=8 noooo it false )
My English not good but I try explain to you 😊
My respect for you
By mistake you have seen the serial number kid. Don’t see the serial number please. Just see the rank that is appearing next.
Sir where is rank 7 in R1
Thanks sir
Is r2-r1 ? or r1-r2? What is right?
Doesn’t matter u get to square it anyway
Thankyou sir
Where does 12 come from sir
It’s in the formula of Spearman’s rank calculation
44 kaha se aaya?
Yadi m ki value 0 rhe to kya karenge.
Thank you sir
Your formula is wrong
No it's correct
@@atharvamore7505 nah actually this is the 3rd different formula I'm watching for tied ranks......so I'm still confused
You are literally telling a sir that the formula he used is wrong 😂
I think he did his research before posting it
@@intazislam3916its not wrong but very complicated
7 th s no is not 15 there is mention 65🤦♂️🤦♂️
Ok
Wth 7th number mey kaha hey 15
4.04 how you putten 8 please tell
Average of (7+8+9)/3=8
@@bksoam 7+8+9/3=18 only coming sir
@@star-gs2gj please sum 7, 8, and 9 first divide the total by 3. Take the average
@UC_82U2QOQbkG2C17kpcuxiw 15 is on 7th 8th and 9th position
Thanks sir
What to do if final answer is coming big if we took in ascending order and If I’ll do r2-r1 will this come correct in exam
Answer would remain between -1 and +1. Ultimately you have to square the difference it doesn’t matter you take r1-r2 or r2-r1. You can choose to assign highest rank number to lowest value of vice-Versa it won’t impact the outcome until you follow same pattern of rank assignment for both the series
Super explanation sir..tq
Thank you
Thank you sir that is help me lot 🙂
Thank you for this lecture
Awesome
How about three judges? Can you explain the R concept in that case?
Sure
ruclips.net/video/TH_5zvLvklE/видео.html
@@bksoam Thank you Sir