Buy a Ring Video Doorbell here - amzn.to/35jdQFN (affiliate link) Hey everyone, since some people have been asking... You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up. Also, doorbell wires are low voltage, they can not shock you and all that happens when you touch them together is the doorbell goes off. If it makes you feel better you can shut off the power in your panel but is not necessary. Please consider subscribing to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😃
If you have a digital doorbell you might have a DC transformer. Ring will not charge from a DC current, you will have to replace your transformer to an old school AC transformer.
Okay thanks for clarifying! I’m terrible with wiring and easy things like this and I wouldn’t have gotten the courage to instal this on my own without you saying I wasn’t going to die if I didn’t know where to go turn off the power 😂 Thank you!!!
I had one of these about a year ago someone stripped the nut and I never could get the camera off again to charge it and use it. I now just got another one in today. I missed it and I am waiting on my ring video door bell to charge. How long does it take do you remember ? Your tip about the existing wiring. Made me wish I had existing wiring then I wouldn't have to take it down at all right ?
@@Nick-bh1fy Yeah. Especially if it's a higher volt doorbell. They can range from 12 to 24 volts. Lower voltage won't do much harm but if it's a higher one it definitly will. The problem I had is teaching others to do it unsafe. And I don't mean just harm to the new doorbell. 24 is enough to spark a fire easily. If not at the point of contact, then somewhere in the wall.
Thank you so much I’ve had my Ring for more than 9 months and have yet to install it because I didn’t want to destroy the front of my house but now i feel comfortable enough to do it myself 😊
I still have mine in the original box after 2 1/2 years. The programming step he skipped over in the video about chargine and programming it using the App is where I get flummoxed. I hired an electrician and he quit stating that my doorbell was an old 7 volt and needed to be a 12 volt to make it work. RIght now, the ring just sits there in its original box. But, my doorbell still works and so does my trigger finger. 🤯
Good solid step-by-step instructions (Nice to know that even if the doorbell is lower, it still captures the video up well enough). Thanks for putting this together, I appreciate it!
A suggestion, when I ordered my ring doorbell, I went ahead and ordered a second battery. Now, when the battery runs down I just pop off the cover, install the fresh battery and pop the cover back on. Now my bell is always operating and I don't have down time while the other battery charges, which can take a while. Also, if a battery should fail, I'm not completely without my doorbell service while another battery is shipped. It's well worth the extra bucks for the battery and I highly recommend it. :) Good video, simple and correct. As for the height of mounting, it has a wide and tall range of view and people will look right at the bell when they go to press it, so you'll have no problem getting a face shot. If they're just coming to door or on porch, you'll still get enough view for an identification should you need it for later. (Cops, etc.) You can also adjust your field of motion sensitivity to get the best performance for your door. You didn't mention it but when you put in the first two screws to mount the plate, you went to opposite corners. You seem to understand the principle but to anyone else watching, mounting opposite corners like that ensures that you keep your level reference and helps keep even pressure on the plate so you don't bind it at all. Good demo.
I cannot believe nobody and I mean nobody commented to say thank you for that is a fantastic idea!!!!!!!! You brought up very good reasons for ordering an extra battery so you the best comment award you have earned!!!!
One point to note before installing make sure to CUT POWER OFF from circuit breaker to avoid potential electrocution. Safety first. Besides that good instructional video.
I love how these cameras are everywhere so now you can be watched now only from the inside of your house you’re smart technology. But when you arrive home and if you ever need to be questioned. What a wonderful little accomplice
For anyone worried about not turning the breaker off before installing. Don’t worry, unless your doorbell is supplying over 100 volts (which it won’t lol). I’m an HVAC tech and 12-24 volts won’t harm you or your Ring.
We don't even have our house yet (In June) and I'm already planning to do this via your instruction. I was going to get the small basic one, but i'll have to get the 2nd gen one since it helps you out when the time comes. Thank you so much!
Thank you for this video. You simplified the process so well that even a klutz like me could possibly do this. Now off to see some of your other videos.
Thank you. Now I can finally change my old doorbell instead of becoming 2. I will watch this again to install a new ring. Thank you for easy instructions ☺️
Great install video. The new doorbells are packaged differently without a back plate. The wires mount directly to the back of the doorbell. I just got my Doorbell 3 and in the process of installing. Thanks for the info!
Thank you for posting this video. I had concerns about purchasing the ring doorbell because our current doorbell is low like yours, I was afraid we would have to replace the wood around the door in order to make it work, but your video eliminated any concerns I had.
That is not safe because, you're install an Apllication before you use that device Ring and they will collect your information, camera and picture's so, hackers can watch you and the whole world. Hackers can open your door lock by using the App. So. Not safe.
Anyone newly viewing this video should consider keeping your wired doorbell and install Ring for one reason: only the people who have access to your phone will be able to see who is at the door and interact or speak with them. Another situation to consider is this: if you leave home and family members remain, they will not be able to use Ring if you took your phone with you. Unless you are able to link your tv with Ring, a major obstacle will prevent visual images from being accessed through this device.
Thank you for saying that. I just purchased the ring yesterday and I was sitting here debating if I should remove my doorbell or install the ring camera along the side of the existing doorbell. Thanks again!
Nice tutorial! One thing, though… I know (and you know) doorbells are generally safe, but your viewers may not be as experienced as you are, or could be working with dangerously/incorrectly installed circuits, or might misjudge their safety and end up getting shocked. Not explaining/observing basic electrical safety practices (like switching off the circuit breaker and never handling live wires of a system connected to mains) when explaining these topics could backfire one day for either you or your viewers. You create some great content, make it even greater by teaching your viewers how not to get shocked 😛
that's a good point, i thought those wires are non electric, if they're as he stated why is it that it doesn't mater which side the wires goes, that means no positive or negative at all?!!!
@@frankg846 Nope. That's because the wires run alternating current, which means the polarity changes constantly, it's just like your mains electricity, except at a lower voltage (8 to 24V AC normally)
@@frankg846 Yes, those wires are live. In fact, the Ring Doorbell maintains a trickle charge to its battery through them. So, it's not a bad idea to turn the breakers off. It takes you less than 30 seconds and it's a good habit to have anyway.
My dogs ARE the door bell! My original bell is gone so as soon as someone opens the storm door to knock, Barky and Barky 2 are on the case! I'm getting the Ring just for the security, not the bell.
Thankyou so much for these step by step instructions. I was really wondering if I might be able to install it by myself (70+) and I think I can. Very well done.👵
The Ring Doorbell Pro requires a constant power supply with a voltage between 16V-24V and at least 30VA of amperage. Even if your voltage is reading 16V-24V you still need to check that you have 30VA of amperage from the transformer, as this is the recommended amperage requirements from the manufacturer of the Ring Pro Doorbell. It should be noted that the Ring Doorbell Voltage requirement for the Ring Doorbell 2 is lower because the Ring Doorbell 2 has a built in rechargeable battery, so it can accept a wider range of voltages because it charges the battery that powers the doorbell vs providing direct power to the doorbell. The voltage requirement for the Ring Doorbell 2 is between 8V-24V AC. We typically recommend using the Ring Doorbell Pro because it has more features but the Ring Doorbell 2 is a great option if you don’t have access to change out your existing lower power transformer.
Question: If you don't mind, if one doesn't have the Ring Pro 2, you don't have to change the transformer, and even if hard wired, you still have to recharge the Ring Door bell 2 battery. Is that correct 🤔. Reason why I'm asking because the Ring company told me I have to change the transformer even with the Ring camera 2
Thanks boss! I needed a ring video doorbell, and after watching your video I ordered through your link and it's already connected. I did want to add, they no longer offer the screw driver so you need to bring your own Phillips screw driver.
Good video! Your dog is not the only one that barks! My German Shepherd starts barking the minute he hears your dog barking in the video! Every time, too. ha ha I'm going to pick one of these up today.
Great tutorial. I was worried the doorbell location was too low but I can see now that the wide angle lens actually has good coverage from the doorbell location. I'm glad to find someone that shares an install of this device. Ring actually does an incredible job of providing installation guidance and materials. As a person who works with both high and low voltage equipment I have to disagree with the idea that its fine to leave the power on. If you provide the ground to a low voltage circuit it can and will shock you. It will not kill you but you will feel it. If you short your circuit to a ground you can pull enough amps through the transformer you can burn it up and make another item to install. So, dont work with live power, and never suggest someone else to do so. Please
THANK YOU!! I would automatically pay someone to do this, but I am so confident I can do it having watched you. Thank you so much for such a great video :) Bless you and your pup! ~D
@TexPR1. You only charge it once, if your doorbell is direct wired. The wires are direct thats your power source to charge it but if don't have direct wire rhen you have buy a separate charger for it. Good Luck.
This instructional video is well done Fixer. You had a nice touch in that you went straight into this an original purchaser, and did the install from scratch (which is probably how 85-95% of folks go into purchases and installs like this) so that provided a great deal of realistic 'what-can-happen' effect to this video and that helps me when I'm actually doing something for the first time. (As an aside, for the 1st timer, they should find the circuit breaker that powers their doorbell and turn it off before they do anything like this, since electricity can be a real bugger if you don't turn the power off) / Fixer, much appreciated (as I'm going to order this thing now and be just like you within 2 days from now !) / Cheers !
Thank you Very Much. Your presentation was very helpful; it is tailor made for guys like me .,who have very limited knowledge and skills with this. Thank you again.
That's exactly what I was looking for. The one I have installed went offline so I had to take it off to press the reset button. I was out there with a tiny allen key trying to get those bottom screws off until I watched your video. Thanks man!
Prime Day purchase here.🖐 Thanks so much for sharing!! Mine is a three so looks a little different than yours. I will purchase one for my back door on Cyber Monday. I just subscribed so 👋 hello from Sweet Home Alabama!! ROLL TIDE❤️🏈 Stay safe out there everyone. 😷😷😷
Good video, thanks! Your handling of live wires was making me cringe a bit though. I got shocked the other day installing a light switch, I flipped the breaker the wrong way after some testing. Easy to avoid!
Would like to see you install a wired Ring install on a brick situation. It's easy to install on a space that has adequate space in the situation your showing
Do people usually steal those im worried about someone stealing it since it is pretty expensive does ring replace it if someone steals it i live in the hood
Use your head you can always screw some type of metal cage that leaves camera open, make sure to cover up screws with liquid naila sand it off and paint so thieves dont know type of screws used or where they are. One good method I used before i grinded off screw head with a grinder so it is impossible to use any drill or screw driver
I have one on the way. Il be installing myself. How did you not get electrocuted?? Il be shutting off power cause my luck has been pretty bad this year.
Thank you for the great video. Clarifying Question: So if you do not have an existing doorbell, you can just mount it to the house (following all the instructions, except the wiring)? What’s the purpose of the diode?
Correct you can mount the ring doorbell basically anywhere. I would recommend the solar charging base plate otherwise you will have to remove the ring doorbell to charge it. The diode is if you have a digital chime in your house. You stated that you do not have a doorbell so the diode you can disregard.
You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up.
Very well done! You’re helping me decide if I should get a Ring for Front and back doors as a convenience and security device. My front doorbell faces to the side so my view will be restricted to when the person is standing by the door, not the approach. Thanks to your video I’m also made aware that I’ll have to take down to recharge the unit. Thanks!
Actually Mr. Pete you do not have to take the doorbell down if you are using wires that were already there. If it is hooked up to doorbell wires he did not need to remove it to charge it. I should have clarified that in the video. Hope this helps. I can watch it.
@@TheFixerHomeRepair Yes, thanks I saw how that works with the battery insert. I’m now thinking about the Stick Up which you also did a video on. I will have more placement options and just leave the doorbell alone. I will depend on the motion sensor to activate the camera and or I assume I can activate it myself from the app on my iPhone say if I just want to look outside.
Thank you for this video! This maybe a dumb question, I apologise, but if I'm wiring it to my house, will it charge the ring automatically? I noticed you mentioned taking it off to charge it... I thought wiring it up was supposed to keep it charged.
Most people won’t do this type of install because they fear the power and the drilling part. It’s actually super easy. It won’t shock you but if you’re worried about it, add a little bit of electrical tape to the leads if you want. A little extra work for a peace of mind. Totally optional. This is low voltage. I work in the technology industry and you don’t really need to find the breaker and turn it off. The drilling part. If it’s wood, even easier. Mark and make tiny pilot holes to make it easier to insert the wood screws without damage. If concrete, use a masonry bit just big enough to insert an anchor into the hole. The rest is pretty easy and just a matter of inserting everything in. The diode is used for the newer high tech doorbells and goes across the two screws you insert the doorbell wires to. You can easily tell this too. The sound is like what your phone makes. Old school wins this battle as it’s easier to install and one less thing to towery about. So no diode installation. On a note, if you’re installing the diode for a digital doorbell and it doesn’t work after you’ve installed everything, it means you’ll need to reverse the leads of the diode on the two screws from the mounting bracket. That’s it. Rule of thumb, you always want to hand tight the screws afterwards. Never use the drill to screw it in all the way. I did this with every simple and small installation projects. This guy did it the right way. Textbook installation. That’s the bulk of the so-called “difficult” install work people fear the most. Now, you’ll want to go out and buy one!!!!! Easy!!!!!!!!!!!!
DUDE I LOVE YOU !!!!! BEST DARN VIDEO IVE SEEN . YOUR THE BEST MAN. THANK YOU SO MUCH FOR THIS PERFECT VIDEO WITHOUT YOU I COULD NOT HAVE DID IT ON MY OWN. IM SO PROUD OF MYSELF. YOUR AWESOME . 👍🏽😁
Thank a bunch for making this video, I've been wondering if I could do this myself or not, I wasn't sure, but now seeing you do it, I'm pretty sure, I can handle that. One question, is there a monthly fee you have to pay to have that working properly?
Thanks for sharing this, I really appreciate it. I didn't know I could change out the RING with the current doorbell without turning the power off to it. Im very skiddish about hot wires and getting electrocuted.
How long do the batteries last? And if I'm hooking it up to a constant flow of electricity, why wasn't this thing engineered to draw power from being connected to electricity in the first place?
Buy a Ring Video Doorbell here - amzn.to/35jdQFN (affiliate link)
Hey everyone, since some people have been asking... You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up.
Also, doorbell wires are low voltage, they can not shock you and all that happens when you touch them together is the doorbell goes off. If it makes you feel better you can shut off the power in your panel but is not necessary.
Please consider subscribing to my channel: bit.ly/SubscribeToTheFixer
Thanks for watching! 😃
Can this be hooked up to a android cell phone would love to know thank you very much for this video
If you have a digital doorbell you might have a DC transformer. Ring will not charge from a DC current, you will have to replace your transformer to an old school AC transformer.
Okay thanks for clarifying! I’m terrible with wiring and easy things like this and I wouldn’t have gotten the courage to instal this on my own without you saying I wasn’t going to die if I didn’t know where to go turn off the power 😂
Thank you!!!
Great video & clarification.
I had one of these about a year ago someone stripped the nut and I never could get the camera off again to charge it and use it. I now just got another one in today. I missed it and I am waiting on my ring video door bell to charge. How long does it take do you remember ? Your tip about the existing wiring. Made me wish I had existing wiring then I wouldn't have to take it down at all right ?
I got a ring doorbell today and instead of reading the instructions I came directly to this video
And probably fried it or it lost a few years off it's life because he didn't turn off his breaker for it.
@@HalkerVeil works perfect. Great video.
@@domnfg I'm sure it does. Just don't be suprised when it doesn't in a year.
@@HalkerVeil why bc he connected the LV to the terminals live? I’m confused
@@Nick-bh1fy Yeah. Especially if it's a higher volt doorbell. They can range from 12 to 24 volts. Lower voltage won't do much harm but if it's a higher one it definitly will. The problem I had is teaching others to do it unsafe. And I don't mean just harm to the new doorbell. 24 is enough to spark a fire easily. If not at the point of contact, then somewhere in the wall.
I’m 4 years late but I just got a ring doorbell and this video is much appreciated. You gained a subscriber over here. Thank you!
Thank you! I’m growing old waiting for my husband to install this!!! Doing it myself now.
Lol
You go girl.
Wow!!!! We are in the same boat. I’m taking matters in my own hands too!!!
@@jennifer8717 you guys should just divorce your husband's and get together! Between the two of you, imagine all you could accomplish.
@@jeffdur1330 😆💯
One of the better installation videos I’ve seen. Clear and to the point.
Clear is the understatement of the millenium! I think this thing was hot in like 48K!
This is a nice video, but does it keep the battery charged??
Thank you so much I’ve had my Ring for more than 9 months and have yet to install it because I didn’t want to destroy the front of my house but now i feel comfortable enough to do it myself 😊
Did you do it?
Kinda same, but 2yrs for me!!😂
Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.
I still have mine in the original box after 2 1/2 years. The programming step he skipped over in the video about chargine and programming it using the App is where I get flummoxed. I hired an electrician and he quit stating that my doorbell was an old 7 volt and needed to be a 12 volt to make it work. RIght now, the ring just sits there in its original box. But, my doorbell still works and so does my trigger finger. 🤯
It would be good if the "government" would follow up and prosecute the porch pirates that these cameras catch in the act.
I just picked up a ring doorbell from Home Depot. Thank you very much your tips were very helpful.
Very happy to hear this video helped you out, Miguel!! Good luck!
Good solid step-by-step instructions (Nice to know that even if the doorbell is lower, it still captures the video up well enough). Thanks for putting this together, I appreciate it!
The lens is fisheye, picks up a wide field of vision.
Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.
This was so helpful. It took me no time at all to install my doorbell. Thank you!
A suggestion, when I ordered my ring doorbell, I went ahead and ordered a second battery. Now, when the battery runs down I just pop off the cover, install the fresh battery and pop the cover back on. Now my bell is always operating and I don't have down time while the other battery charges, which can take a while. Also, if a battery should fail, I'm not completely without my doorbell service while another battery is shipped. It's well worth the extra bucks for the battery and I highly recommend it. :)
Good video, simple and correct.
As for the height of mounting, it has a wide and tall range of view and people will look right at the bell when they go to press it, so you'll have no problem getting a face shot. If they're just coming to door or on porch, you'll still get enough view for an identification should you need it for later. (Cops, etc.)
You can also adjust your field of motion sensitivity to get the best performance for your door.
You didn't mention it but when you put in the first two screws to mount the plate, you went to opposite corners. You seem to understand the principle but to anyone else watching, mounting opposite corners like that ensures that you keep your level reference and helps keep even pressure on the plate so you don't bind it at all. Good demo.
I cannot believe nobody and I mean nobody commented to say thank you for that is a fantastic idea!!!!!!!! You brought up very good reasons for ordering an extra battery so you the best comment award you have earned!!!!
@@jimmygrant424
Why, thanks for the kind words...
Thanks!!!
Thanks
Hello. Could you please advise what the battery life is like.
Awesome video. You did it where a woman like myself can do it. I appreciate simplicity. Thank you
One point to note before installing make sure to CUT POWER OFF from circuit breaker to avoid potential electrocution. Safety first. Besides that good instructional video.
And he explained why, in a prior comment/reply. :)
You did a great job. Better than most instructional videos I've seen
😂❤
I love how these cameras are everywhere so now you can be watched now only from the inside of your house you’re smart technology. But when you arrive home and if you ever need to be questioned. What a wonderful little accomplice
2 things. 1. Check voltage going to doorbell to see if it is sufficient.
2. Turn off power before replacing doorbell.
Thanks for the detail step-by-step for those of us who are less handy.
Great video, simple and in layman's language, I'm installing a ring system and this is the perfect tutorial video...nice doggie!!!!
For anyone worried about not turning the breaker off before installing. Don’t worry, unless your doorbell is supplying over 100 volts (which it won’t lol). I’m an HVAC tech and 12-24 volts won’t harm you or your Ring.
We don't even have our house yet (In June) and I'm already planning to do this via your instruction. I was going to get the small basic one, but i'll have to get the 2nd gen one since it helps you out when the time comes. Thank you so much!
Thanks so much! Hope the instructions help. Good luck and congrats on the house!
Thank you for this video. You simplified the process so well that even a klutz like me could possibly do this. Now off to see some of your other videos.
Glad it was helpful!
Easy, peazy. Even a gal can install it. Thank you, You kept it simple
You are welcome! I hope it helped you out, Cassondra!
Sexist comment. Why cannot females do what makes can?
Thank you. Now I can finally change my old doorbell instead of becoming 2. I will watch this again to install a new ring. Thank you for easy instructions ☺️
Great install video. The new doorbells are packaged differently without a back plate. The wires mount directly to the back of the doorbell. I just got my Doorbell 3 and in the process of installing. Thanks for the info!
I’m not even kidding when I say this, this tutorial made everything make so much sense I went and bought one right away to install lol
Thank you for posting this video. I had concerns about purchasing the ring doorbell because our current doorbell is low like yours, I was afraid we would have to replace the wood around the door in order to make it work, but your video eliminated any concerns I had.
That is not safe because, you're install an Apllication before you use that device Ring and they will collect your information, camera and picture's so, hackers can watch you and the whole world. Hackers can open your door lock by using the App. So. Not safe.
@@0816sexy the ring cannot unlock your door idiot
Anyone newly viewing this video should consider keeping your wired doorbell and install Ring for one reason: only the people who have access to your phone will be able to see who is at the door and interact or speak with them. Another situation to consider is this: if you leave home and family members remain, they will not be able to use Ring if you took your phone with you. Unless you are able to link your tv with Ring, a major obstacle will prevent visual images from being accessed through this device.
Thank you for saying that. I just purchased the ring yesterday and I was sitting here debating if I should remove my doorbell or install the ring camera along the side of the existing doorbell. Thanks again!
Nice tutorial! One thing, though… I know (and you know) doorbells are generally safe, but your viewers may not be as experienced as you are, or could be working with dangerously/incorrectly installed circuits, or might misjudge their safety and end up getting shocked. Not explaining/observing basic electrical safety practices (like switching off the circuit breaker and never handling live wires of a system connected to mains) when explaining these topics could backfire one day for either you or your viewers.
You create some great content, make it even greater by teaching your viewers how not to get shocked 😛
that's a good point, i thought those wires are non electric, if they're as he stated why is it that it doesn't mater which side the wires goes, that means no positive or negative at all?!!!
@@frankg846 Nope. That's because the wires run alternating current, which means the polarity changes constantly, it's just like your mains electricity, except at a lower voltage (8 to 24V AC normally)
@@guidoscalise so the wires are electric and you have to turn off the breakers first, correct?
@@frankg846 Yes, those wires are live. In fact, the Ring Doorbell maintains a trickle charge to its battery through them. So, it's not a bad idea to turn the breakers off. It takes you less than 30 seconds and it's a good habit to have anyway.
@@guidoscalise awesome! Thank you, wanted to install mine today.
Finally! The perfect DIY install video exists. Well done
"If you hear the dog bark, the door bell works." lol. Great video
Yep 👍 both dogs barked
My dogs ARE the door bell! My original bell is gone so as soon as someone opens the storm door to knock, Barky and Barky 2 are on the case! I'm getting the Ring just for the security, not the bell.
lal Mawi Stop Copy Him What He Said If You Hear The Dog Bark?
My dogs hear the doorbell and thinks it’s pizza delivery so they don’t bark!
@@johnhamilton6205 Hush Your Mouth!
Thank you so much. This video is so much helpful for me.
I've never installed anything in USA so I was nervous.
Set up my Ring today. Thanks for this vid. Was really helpful!
Hey, Jeff. Hope it helped! Thanks for watching!
Thankyou so much for these step by step instructions. I was really wondering if I might be able to install it by myself (70+) and I think I can. Very well done.👵
Hey Jennifer! If you have any questions on install, don't hesitate to reach out! 😃
Thanks man, I will be using this as a step by step guide tomorrow to hook up my Ring. Great video. Made it look easy.
I have to install one tomorrow so I’m so happy I ran into this video! One video, that’s all, see it here. One and done! Thanks!!!
The Ring Doorbell Pro requires a constant power supply with a voltage between 16V-24V and at least 30VA of amperage. Even if your voltage is reading 16V-24V you still need to check that you have 30VA of amperage from the transformer, as this is the recommended amperage requirements from the manufacturer of the Ring Pro Doorbell. It should be noted that the Ring Doorbell Voltage requirement for the Ring Doorbell 2 is lower because the Ring Doorbell 2 has a built in rechargeable battery, so it can accept a wider range of voltages because it charges the battery that powers the doorbell vs providing direct power to the doorbell. The voltage requirement for the Ring Doorbell 2 is between 8V-24V AC. We typically recommend using the Ring Doorbell Pro because it has more features but the Ring Doorbell 2 is a great option if you don’t have access to change out your existing lower power transformer.
Thank you!
Question: If you don't mind, if one doesn't have the Ring Pro 2, you don't have to change the transformer, and even if hard wired, you still have to recharge the Ring Door bell 2 battery. Is that correct 🤔. Reason why I'm asking because the Ring company told me I have to change the transformer even with the Ring camera 2
Thanks man. Ive had mine for months but I didn't know how to install it, & I was intimidated 😊
Wow, that was easy! Thank you for the awesome video. 😁
Yes, very easy peach! Thanks for watching!!
Thanks boss! I needed a ring video doorbell, and after watching your video I ordered through your link and it's already connected. I did want to add, they no longer offer the screw driver so you need to bring your own Phillips screw driver.
Great work. Keep inspiring young people to learn how to do things and do them right.
Keep in mind that Ring forwards any and all of your data to the government without a warrant and you're paying them to do it.
Good video! Your dog is not the only one that barks! My German Shepherd starts barking the minute he hears your dog barking in the video! Every time, too. ha ha I'm going to pick one of these up today.
Great tutorial. I was worried the doorbell location was too low but I can see now that the wide angle lens actually has good coverage from the doorbell location. I'm glad to find someone that shares an install of this device. Ring actually does an incredible job of providing installation guidance and materials. As a person who works with both high and low voltage equipment I have to disagree with the idea that its fine to leave the power on. If you provide the ground to a low voltage circuit it can and will shock you. It will not kill you but you will feel it. If you short your circuit to a ground you can pull enough amps through the transformer you can burn it up and make another item to install. So, dont work with live power, and never suggest someone else to do so. Please
Yes, he should had told viewers to turn of their circuit breaker.
Thank you. I keep seeing people leave the power on to wire Ring doorbells. I wasn't sure why. You explained their reasoning to me.
@Rodney Stockstill Thanks for that info. I was wondering about that, too.
THANK YOU!! I would automatically pay someone to do this, but I am so confident I can do it having watched you. Thank you so much for such a great video :) Bless you and your pup! ~D
You can send me the money!!ll
You made this look so easy! I feel empowered to make the purchase now & to do it myself.
Right. I said the same thing too, now I’m gonna go buy one and see how it goes for me too. Wish me luck 🍀 😊😊
@@marieantoinette81 how’d it go? Did you get it all setup?
@@digidrawdude Yes, sir.
@@marieantoinette81 good to know! Glad you got it working!
Good advice about the charging beforehand. Thank you.
Very nice informative video! Do you have to take this thing down periodically to charge the battery? If so, how often is that?
@TexPR1. You only charge it once, if your doorbell is direct wired. The wires are direct thats your power source to charge it but if don't have direct wire rhen you have buy a separate charger for it. Good Luck.
You totally deserve your percentage of the sale. I'm gonna save this video and use your link when I buy. Should be before Saturday. Great tutorial. 👍
Didn’t know it was as simple as this! Definitely getting one now thank you!
Same here. I thought it was a big process you have to use a app
I’m getting one right now. People are stilling my packages 📦 like crazy 🤕
What’s the monthly cost?
Facts
Awesome video🎉
Heading to go purchase a new Ring, to upgrade my dated door bell.
I’ll let you know how it goes
This instructional video is well done Fixer. You had a nice touch in that you went straight into this an original purchaser, and did the install from scratch (which is probably how 85-95% of folks go into purchases and installs like this) so that provided a great deal of realistic 'what-can-happen' effect to this video and that helps me when I'm actually doing something for the first time. (As an aside, for the 1st timer, they should find the circuit breaker that powers their doorbell and turn it off before they do anything like this, since electricity can be a real bugger if you don't turn the power off) / Fixer, much appreciated (as I'm going to order this thing now and be just like you within 2 days from now !) / Cheers !
Thank you Very Much. Your presentation was very helpful; it is tailor made for guys like me .,who have very limited knowledge and skills with this. Thank you again.
Hey Antonio! I'm glad that I could help. 👍😃
Thnx for the video my ring just came in last night gonna go give this installation a whirl
Awesome! How did it go? Very curious to hear. Thanks for watching the video, I hope it helped out!
Thanks for putting this video up. Looks easy, no need for an installer to do it for me.
Thank you! Looks like it’s something I can actually do myself 👌🏾👍🏾👏🏾
This is the best instructional video I've ever seen.. This was easy to watch, and so informative. Thank you for sharing
I taught this guy EVERYTHING he knows!!!!........... okay maybe not but hopefully I made a pretty lady smile!!!
That's exactly what I was looking for. The one I have installed went offline so I had to take it off to press the reset button. I was out there with a tiny allen key trying to get those bottom screws off until I watched your video. Thanks man!
That's a ring the new camera on and off do they insert camera
Like the fact you get right to the point. Excellent video 👍 Thanks
Awesome!! Thank u so much for being a blessing to all the do it our self kind of people .
The chime works with ring or this ring bell only has a notification on the phone?
Thanks so much for the video. Did my cousin's today with no problem 👍🏽
4:43 The best doorbell & home security you can get!
FANTASTIC VIDEO!!! You just saved me like $500! Keep posting!
Great video, I’m about to order my doorbell and have it install. Thank you.
Great video. Every time the doorbell went off my dog barked. I guess he recognized the sound. We have a Ring.
You should always turn off the power at the breaker first even if it is low voltage.
No I like the tingle
Yes, anyone saying no is an unsafe moron.
@@TheRedRaven_ it’s low voltage shut the fuck up
^^ Low IQ
kiyonexus Clown.
Excellent, easy step-by-step explanation.
Prime Day purchase here.🖐 Thanks so much for sharing!! Mine is a three so looks a little different than yours. I will purchase one for my back door on Cyber Monday. I just subscribed so 👋 hello from Sweet Home Alabama!! ROLL TIDE❤️🏈 Stay safe out there everyone. 😷😷😷
You make things look so simple.
Watching you from Bakersfield, California.
😀👏👍🏻
My dog went crazy barking every time you ringed the doorbell 😂😂😂😂
Haha 😂😂 Yup, thats what they do! Thanks for checking out the video!
Whole lotta people from Amazon Prime Day is about to raid this video
I hope this is a good thing. 🤔😁
I am one of them lo
I did this same exact install and the inside doorbell still doesn’t work. Any suggestions?
Yep, that's me 😂
As I am one of them.lol
Thank you, you made this look doable. I feel I can possibly do it myself.
Im an electrician, you should shut the power off every time before you decided to mess with any kind of energized circuit.
Meh
It’s low voltage
My doorbell is horizontally located and on a siding, not sure if it would work to mount the exact same way you did in your video?
Good video, thanks! Your handling of live wires was making me cringe a bit though. I got shocked the other day installing a light switch, I flipped the breaker the wrong way after some testing. Easy to avoid!
It’s only 24v give you a little flick that’s all
Nice work! Thank you for sharing your experience and knowledge 👍
Would like to see you install a wired Ring install on a brick situation. It's easy to install on a space that has adequate space in the situation your showing
Thank you so much! I wasn't sure what to buy and I will get the affiliate link and now I know that we can install it ourselves!
Great video! I think I can handle this! 👍🏾🙂
Do people usually steal those im worried about someone stealing it since it is pretty expensive does ring replace it if someone steals it i live in the hood
I was install not expencive one got steal not sure if i should install this my unit infront of street n bus stop
Use your head you can always screw some type of metal cage that leaves camera open, make sure to cover up screws with liquid naila sand it off and paint so thieves dont know type of screws used or where they are.
One good method I used before i grinded off screw head with a grinder so it is impossible to use any drill or screw driver
I have one on the way. Il be installing myself. How did you not get electrocuted?? Il be shutting off power cause my luck has been pretty bad this year.
I was wondering that too. 😆
Great video, well explained, now I know how to install the The Ring Bell.
thank's.
Thank you for the great video. Clarifying Question: So if you do not have an existing doorbell, you can just mount it to the house (following all the instructions, except the wiring)? What’s the purpose of the diode?
I have the same question
Correct you can mount the ring doorbell basically anywhere. I would recommend the solar charging base plate otherwise you will have to remove the ring doorbell to charge it. The diode is if you have a digital chime in your house. You stated that you do not have a doorbell so the diode you can disregard.
Did you have to disconnect the circuit somewhere before performing this repair? Does a doorbell have a standard 120v outlet?
I need to know as well. Don’t want to get electrocuted but it didn’t look so
Thank you sooooo much. I've always wanted to install. Now I can. Again THANKS!!
So you still need a battery even though you’re using the existing electrical wiring?
You only have to remove the Ring to charge it if you do not hook it up to an existing doorbell. I’m sorry I should have clarified that. So to be clear if you do not hook it up to existing wiring you need to remove and charge, otherwise the doorbell wires will charge it if you have it hooked up.
I was going to ask this same question. Thanks for posting!
I hooked mine up to a digital box and now it starts ringing on it's own and won't stop ringing unless i un hook it.
Very well done! You’re helping me decide if I should get a Ring for Front and back doors as a convenience and security device. My front doorbell faces to the side so my view will be restricted to when the person is standing by the door, not the approach. Thanks to your video I’m also made aware that I’ll have to take down to recharge the unit. Thanks!
Actually Mr. Pete you do not have to take the doorbell down if you are using wires that were already there. If it is hooked up to doorbell wires he did not need to remove it to charge it. I should have clarified that in the video. Hope this helps. I can watch it.
@@TheFixerHomeRepair Yes, thanks I saw how that works with the battery insert. I’m now thinking about the Stick Up which you also did a video on. I will have more placement options and just leave the doorbell alone. I will depend on the motion sensor to activate the camera and or I assume I can activate it myself from the app on my iPhone say if I just want to look outside.
I noticed you didn't turn the power off for the doorbell via the breaker box, isn't that necessary?
Yes!
What would you have done if the wires leading from your existing doorbell had been too short to connect to the Ring? I have that problem.
Thank you for this video! This maybe a dumb question, I apologise, but if I'm wiring it to my house, will it charge the ring automatically? I noticed you mentioned taking it off to charge it... I thought wiring it up was supposed to keep it charged.
I thought the same and was hoping for a reply. Welp, more RUclips research it is lol.
@@djstreamtv it keeps it charged! 😆
@@crudolph277 thank you!
Great video. Thanks. I like that you get right to it, no BS! Good job.
1:33 can u explain how u connect the door bell to ur phone?
Most people won’t do this type of install because they fear the power and the drilling part. It’s actually super easy. It won’t shock you but if you’re worried about it, add a little bit of electrical tape to the leads if you want. A little extra work for a peace of mind. Totally optional. This is low voltage. I work in the technology industry and you don’t really need to find the breaker and turn it off.
The drilling part. If it’s wood, even easier. Mark and make tiny pilot holes to make it easier to insert the wood screws without damage. If concrete, use a masonry bit just big enough to insert an anchor into the hole. The rest is pretty easy and just a matter of inserting everything in.
The diode is used for the newer high tech doorbells and goes across the two screws you insert the doorbell wires to. You can easily tell this too. The sound is like what your phone makes. Old school wins this battle as it’s easier to install and one less thing to towery about. So no diode installation.
On a note, if you’re installing the diode for a digital doorbell and it doesn’t work after you’ve installed everything, it means you’ll need to reverse the leads of the diode on the two screws from the mounting bracket. That’s it.
Rule of thumb, you always want to hand tight the screws afterwards. Never use the drill to screw it in all the way. I did this with every simple and small installation projects. This guy did it the right way. Textbook installation.
That’s the bulk of the so-called “difficult” install work people fear the most. Now, you’ll want to go out and buy one!!!!! Easy!!!!!!!!!!!!
DUDE I LOVE YOU !!!!! BEST DARN VIDEO IVE SEEN . YOUR THE BEST MAN. THANK YOU SO MUCH FOR THIS PERFECT VIDEO WITHOUT YOU I COULD NOT HAVE DID IT ON MY OWN. IM SO PROUD OF MYSELF. YOUR AWESOME . 👍🏽😁
That is amazing to hear! That is why I make these videos. Thanks so much for letting me know it helped you out!
Lol
Home Theaterguy 🤓😁
@@liajohnson685 🤣
Thanks man my mother needed help and did not under stand I did so I told her what to do
Great video mate!
Maybe a dumb question, you don’t need to cut the power before messing with the doorbell wires?
No because there is no electricity going through them, unless they touch each other. That’s how the doorbell works!!
Is the video jumpy? Delay, etc?
Thank a bunch for making this video, I've been wondering if I could do this myself or not, I wasn't sure, but now seeing you do it, I'm pretty sure, I can handle that. One question, is there a monthly fee you have to pay to have that working properly?
Its 3 bucks a month, look on their website to be sure
@@imChanthip Thank you so much
@@emsmith2519 np, just installed mine but my front area is brick. It was a pain
Happy to hear the video helped! Looks like @imchanthip answered your question. Thanks for watching!
@@imChanthip I did not know there was any fees. Looking on their website did clear that up for me; thanks for the tip.
Thanks for sharing this, I really appreciate it. I didn't know I could change out the RING with the current doorbell without turning the power off to it. Im very skiddish about hot wires and getting electrocuted.
How long do the batteries last? And if I'm hooking it up to a constant flow of electricity, why wasn't this thing engineered to draw power from being connected to electricity in the first place?
6 to 12 months depends on how much motions r there
Great instructions. I have one now and will follow your instructions.
Really liked that! I want to get one but will have to check with the management to make sure it's ok first. 👍🎥😏
I like it so far! And like I said, really easy to install! Thanks for checking out the video!
It looks so simple. Thanks. I will buy one and do it myself.