29:25 Important! After linking the drawers to the AE2 system, with high priority, LOCK the drawers! This is as easy as using the other drawer tool on the drawer controller. If you don't, the AE2 system will dump *everything* to the drawers, until they are filled up. System didn't show that in the video, and it will be a real headache if not done.
I don’t recommend using ae to auto craft the pieces it’s better to compact them first before and process before going into the system otherwise you will get a lot of blinking and shifting items in your system
FYI System, the controller for Functional Storage doesn't need to be attached to the drawers physically. Additionally if you pickup the drawers, I believe it retains its connection to the controller and vice versa
While you have so little of the flux plugs set up you should set up a in and out channel for your power to save you when you have to do it later on in the pack.
1 thing about the functional storage upgrades. They multiple by the current capacity, not the base. This means that 3 copper upgrades gives 1 million storage per drawer.
I was waiting for this moment for the entire day. First of all, I love your videos, your editing style etc. long story short I love your content in general. Thanks for cheering me up on my very pitiful day!!😅😅❤❤
@@Systemcollapse you replying to my comment made my day even better, trust me! (A quick question if you don’t mind me asking, will you be doing world downloads at certain episodes or certain checkpoints?)
Ur old method does work u need to filter the circuits in the storage bus aswell as your Gold,diamond,silicone,and cert quartz, so the system knows how and where to store the printed circuits/ it's the same with the final inscriber for the processors. So in the storage bus u put redstone, and all 3 processors.
The pack also has lazier ae2 which has circuit etchers that may be better than the advanced inscribers. Edit: although I suppose it's a moot issue now.
They're infinitely better than the advanced variants. FOr a start you can I/O from juust one side which you can set in the GUI of the machine. Secondly it can hav a max of 8 accel cards in whilst already beeni incredibely fast... Andddd last but NOT least! You skip the entire crappy printed silicon phase and printed circuit phase as a whole because they only accept the raw ingredients (so diamond/pure/gold) :D
Charged Certus, Nether quartz, and redstone in water is the "normal" way of getting your Fluix crystal. Otherwise, charged certus is essentially useless outside of the certus quartz uses.
Problem with them DISK cells. Is that they easily corrupt. With non-stackable items or items you will end up getting excessive amounts of, it's best to just connect a drawer controller via storage bus to your ae system and set the prio higher than anything else. THat way any items that can be sent and can be extracted from your drawers will be done first, before attempting to be inserted into your storage cells.
@@tourettesonfiree i get how they work and i knw hwoto P2P to get a LOT of them. still a pain though. shrug. also know how to use controller to link to another controller for even mroe channels. althoughi doubt a pack lie this need that much automation
29:25 Important!
After linking the drawers to the AE2 system, with high priority, LOCK the drawers!
This is as easy as using the other drawer tool on the drawer controller. If you don't, the AE2 system will dump *everything* to the drawers, until they are filled up. System didn't show that in the video, and it will be a real headache if not done.
I don’t recommend using ae to auto craft the pieces it’s better to compact them first before and process before going into the system otherwise you will get a lot of blinking and shifting items in your system
FYI System, the controller for Functional Storage doesn't need to be attached to the drawers physically. Additionally if you pickup the drawers, I believe it retains its connection to the controller and vice versa
While you have so little of the flux plugs set up you should set up a in and out channel for your power to save you when you have to do it later on in the pack.
1 thing about the functional storage upgrades. They multiple by the current capacity, not the base. This means that 3 copper upgrades gives 1 million storage per drawer.
I was waiting for this moment for the entire day. First of all, I love your videos, your editing style etc. long story short I love your content in general. Thanks for cheering me up on my very pitiful day!!😅😅❤❤
Your comment made my day. Thank you.
@@Systemcollapse you replying to my comment made my day even better, trust me! (A quick question if you don’t mind me asking, will you be doing world downloads at certain episodes or certain checkpoints?)
Ur old method does work u need to filter the circuits in the storage bus aswell as your Gold,diamond,silicone,and cert quartz, so the system knows how and where to store the printed circuits/ it's the same with the final inscriber for the processors.
So in the storage bus u put redstone, and all 3 processors.
Ah, super thanks for that . Will definitely use that in the future, so just more filtering, Many thanks
That sifting setup is ridiculously good. Thanks for that
Laser IO has a sneaky mode to automate the inscribers
There is a much better inscriber in the pack.
You can put the jetpack in a curios slot by the way; Not sure if you did since I haven't finished the video yet
Nope, did not know that, thanks for the tip.
@@Systemcollapse Frees up that lovely chest slot for good armour!
The pack also has lazier ae2 which has circuit etchers that may be better than the advanced inscribers. Edit: although I suppose it's a moot issue now.
They're infinitely better than the advanced variants. FOr a start you can I/O from juust one side which you can set in the GUI of the machine. Secondly it can hav a max of 8 accel cards in whilst already beeni incredibely fast... Andddd last but NOT least! You skip the entire crappy printed silicon phase and printed circuit phase as a whole because they only accept the raw ingredients (so diamond/pure/gold) :D
You can toggle your jetpack throttle with a button, it has a setting
you can place the jetpack in the curio slot
Charged Certus, Nether quartz, and redstone in water is the "normal" way of getting your Fluix crystal. Otherwise, charged certus is essentially useless outside of the certus quartz uses.
It's required to make any sized storage component. As every storage component needs charged certus for the 1k recipe.
The newest update fixes the JEI search.
just as a fyi the controller doesn't have to touch the draws to work
Aye it’s this ae2 mod. Too bad it’s not rs and I can’t make infinity storage disk puns so you get to *types* your way to victory
It actually does have Refined Storage disk addons mod, just not infinity.
yeap . .mod name: AEThings. Search for _ME DISK Drive_
.. also include Applied Mekanistics, to store Mekanism stuff: gases, pigments, slurries. (no, Nuclear Waste, no)
Problem with them DISK cells. Is that they easily corrupt. With non-stackable items or items you will end up getting excessive amounts of, it's best to just connect a drawer controller via storage bus to your ae system and set the prio higher than anything else. THat way any items that can be sent and can be extracted from your drawers will be done first, before attempting to be inserted into your storage cells.
my lasers too slow, i put same thing like u do but mines are slow
How did you lock your draws?
👍
HMm wonder if i have ot deal with channels . unles ther no refined storage in this pack.. I don't liek channels lol
No RS in the pack. Channels are nice! nosanityhas brilliant guides that are still relevant on ae2 and its channels
@@tourettesonfiree i get how they work and i knw hwoto P2P to get a LOT of them. still a pain though. shrug. also know how to use controller to link to another controller for even mroe channels. althoughi doubt a pack lie this need that much automation
@@zuzoscorner You'd be suprissed with the star recipes
That fortune 4 just saying
My bad.
@@Systemcollapse all good brother just doing my part for the analytics!