2007 swift key /remote programming manual process

2007 swift key /remote programming manual process

[@tcholmes2237]

BOOM! Perfect! Thanks!
... now if I could just touch my finger to my nose and spin around three times to get the brakes fixed...

[@ZQPK]

Put the key in the ignition.
Press the lock / unlock button 7 times.
Put the key in the ignition and pull out 4 times.
Worked for me on keyless start Swift 2007.
The ignition key has 3 positions.

[@3rdworldcycling444]

Will this work with the 2008 ZC31S ? It doesn't have a key fob, just a regular key with the open close button

[@LEWISJAXON1]

Hi five my man, No central locking nearly cost me a sale! Sorted!

[@MaybeMessiah]

Worked like a charm. HallaluYahweh. May Yahweh bless you.

[@numberonenemberone4590]

Great , worked perfect and saved me time . Thanks A lot

[@JoeJoe-td1ke]

Just exactly how those it work because I've tried it so many times and it barely got through. I get the car to start but d button wouldn't work jus d same n when I turn off the car I am back at square 1 again.

[@shaheenansari2667]

Uxjzooixxkoxuonxxjk

[@shaheenansari2667]

Jkkxko

[@TheFlashmark]

Thanks. My remote reset after removing the battery and keep aside for several hours. Now lock/ unlock is working but there is no hazard lights. How can I fix it? (It was there before remote reset)

[@user-jo1hm2jl1p]

بارك الله فيكم

[@efikeyprogramming6375]

First vedio on you tube plz like and subscribe

[@philocase6169]

Huge thanks to you

[@muhammadkashifejaz5298]

Can you please explain that how to match suzuki baleno 2006 remote?

[@abderrahmanebenine432]

hi can you tell me how to manually code a suzuki grand vitara please

[@robcorbett4136]

Thanks, this is a very clear video on the process.

[@charlesedouard2296]

are you sure ? Do you understand what he says ?

[@theresakistner9677]

@@charlesedouard2296 2001

[@romulodeleon2640]

Muchas gracias me sirvio

[@dawidgta123]

Thanks

[@druidiron]

I never get the "beep beep" to confirm program mode. IDK what the problem is. It is beyond frustrating though.

[@tcholmes2237]

I never got a beep beep. However, if after turning the key on and off the second time the locks automatically flip, you know you've got it. Make sure you're going all the way into the ON position, not just accessories - one click before hitting the starter, and then all the way off again.

[@druidiron]

@@tcholmes2237 turns out, my setup was totally different. There were two procedures in my owner's manual but I kept looking at the first. My car is full keyless and that was the problem.

[@joanglad7570]

Gona try this hard a prob with my remote

[@siraj88gcc]

I followed your step but not working brother

[@ysraeltatlonghari2403]

Hello May I ask Procedure for Suzuki APV?

[@aben3435]

Hi there, do you mind to write the process steps by steps as a comment below?

[@My_man_G_UK]

Yeah an explanation would of been helpful instead of counting how many moves is made and process done 🤷🏾‍♂️

[@YoutubeTech82]

can you write down process as i have key that sends a signal and also car went into programming mode but still no luck. thanks

[@efikeyprogramming6375]

ruclips.net/video/-kK_Is0zp24/видео.html

[@dianamomneva4895]

Hi, why this is happened?

[@borgsolo]

Didn't work

[@bull23toromenares10]

Si funciona 👍👍

[@magneticfindsherts8758]

Why cant these people talk and explain?? Next

[@michellejacks5426]

Don't do this procedure because it's immobilise your car and wipes the chip clean. Alot of money to then correct it

[@garrypomerleau8924]

Fake

[@darksidedean]

This doesn't work

[@zainulabideen8575]

Worked for us
Do this procedure slowly not too fast and also accelerate vehicle when you start engine in procedure it will work