WIPPRO 5KW DIESEL HEATER
HTML-код
- Опубликовано: 7 сен 2024
- We review the Wippro 5kw diesel heater with a 30hr runtime test from 1gallon of diesel on low. As well as go over the features of the unit and accessories we use with it.
Wippro 5kw Diesel Heater:
a.co/d/5Qsi8Xp
Camco Quick Clamp:
a.co/d/dbnufva
Vent Hose:
www.amazon.com...
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I just bought this unit. Looks good out of the box, except one corner is smashed in but doesn’t hurt it from running. It has been giving me the 05 error code a few times so I decided to take off the cover and see if what everyone did saying about the green fuel line being crunched. Yes it is. Right as it comes out of the fuel pump. It was installed that way because there wasn’t enough room between the pump and the housing. Maybe that has something to do with it. The fuel pump is laying horizontally on the bottom, no incline like so many say is necessary. I’m replacing the fuel line and installing a filter. I’ll also set the pump on an angle? I’m also purchasing a longer wire for the control screen so I can put it in my house. Seems to be leaking fuel somewhere. I get a little hint of desiel in the house.!
love my lil wippro heater not had it for to longer but it runs better and quieter when it comes to the fuel pump noise then the vevors IMHO
I have that same heater (only it's the narrow tall version but the same heater inside) and it works great! That dryer hose crap melts on my heater right by the air outlet so I can't use it. I went with an adapter from 3" to 4 " and use aluminum dryer exhaust tubing.
Thanks for the tips!
Very good video. Looks like a Weatherby shoulder on that brass.
Thanks its 28 Nosler on the table. Ran out of magnum primers.
Thank you for the video.
This is like the quietest one I ever heard. I just ordered one.
Yes indeed I should have talked more about that as well. Eve compared to another brand diesel heater even with an upgraded pump its still quieter than the other with the upgraded pump. The clicking doesnt bother us at all on this unit. The fan drowns it out.
Just got mine! Can't wait to take it out.
@@brentbreitbach230 will you let me know if your fuel pump is indeed as quiet as the one I have. I am doing a review on other model and the pump is definitely louder on tall model.
@@gladiatoroverland mine starts off loud but quiets after a little bit of operation. I'll pay extra close attention next time I use it.
@gladiatoroverland just confirmed on start up it's loud. I let it run for about 50 minutes went and checked on it and the pump noise is equal to the heater noise at 2.5hz. At 1.7 hz it's barely noticeable.
Great video, I just ordered this item from Amazon last week. Installing today hopefully 🤞
We hope it works out well for you. We will have some videos as we use it in the field.
Hey, thank you very much for the video. Very helpful. Mine is ordered. I’m gonna use it in my camper.
Glad it was helpful!
I see where the bottom exhaust is burning your work bench, perhaps wrap in thermal wrap? Are you just piping it out the window?
We will be wrapping the exhaust. With the spacers it did stop it burning the table but at 1”. Anything less and it gets too hot especially on hi. Yes we were venting out the window.
I tried that kind of hose on my 5KW unit and it melted where it was attached to the heater. Mine runs hotter than yours I guess.
30 hrs for 1 US gallon, but US gallon is less than European gallon.
That means you will get way more hours than US gallon 👍
True in turn it would be over 30hrs period out if a tank or 4 liters if capacity.
Thanks for replying.
Thinking buying 1 for the garage.
For my understanding is that, by reduce the Hz uses less fuel?
Yes indeed. It also lowers the fan speed. If I were using in an insulated garage. I would not foresee the need for much more than on low with a fan in the garage to push heat around. Of course depending on size of the garage. I will be posting another video of the other style heater they distribute as well right after xmas.
@gladiatoroverland ok.
Looking forward to it.
Merry Christmas
Just wondering if you can hook up a quality fuel line from the heater to a Jerry can of Diesel...bypass the fuel tank on the heater...just a thought.
Yea very possible. There are actual kits to modify a usgi diesel can to be able to supply heaters. Its has a metal pickup tube that the fuel line attaches to.
Is there anyway you could show us how you have it going through your wall? What kind of heat protection are you using?
I just have the exhaust running out the window. I did mention that there are through wall exhaust flanges such as this one. a.co/d/6fG2CMn
How hot will the room get when the unit is on high? I’m curious because everyone gives a review but they never say how hot the room temperature really is
We do tell and thats a very subjective question. Depending on room size and insulation, as well as drafts. But even seen that output on such a unit is over 300F on high. You can easily heat a room. The room in question here was in the mid 80s on low with the window cracked and outside temp was in the low 30s. In our large uninsulated gazebo tent on low when 25-35 out we can easily get the temps to high 60s/low 70s on low. We never have had to really use the unit on high to keep temps. Even in a insulated vehicle we have been in sib freezing and have only run up to medium. Rooftop tents mainly low to medium as medium gets in the mid 80s.
What's your take on the two types of heater hose? I have some of that aluminium covered in cardboard and it gets incredibly hot. I was considering buying the more flexible black rubber-looking stuff that you have but it looks flimsy?
All I can say is that the aftermarket hose has worked well for me.
I did purchase some exhaust wrap. The titanium exhaust wrap below really made a difference. a.co/d/bSxYOnA
Which sonic cleaner in the background for your brass? Opinions on it?
Dotn use sonic cleaner for brass only gun parts. I wet tumble my brass mainly with stainless steel pin in a big dawg tumbler. But also use a franklin armory tumbler for syper small batches. Both in video.
That's crazy I have the same unit and I can't even get 8 hours out of of diesel
Ill be posting up a video of another style unit from this company and also have been getting long run times. Ill show in video. Maybe a fluke in the unit you have. ?
Are these quieter than other Chinese heaters, as far as fuel pump noise goes ?
The unit I tested was much quieter than any other unit weve used or have played with out of the box. This unit is even more quite as far as the fuel pump than there other style that I am currently working on a videi.
Can you link where to purchase the power supply?
a.co/d/cTxSO1V
Kas atsitinka jei staigiai pertraukiama elektra prietaisui veikiant?
Nothing particular would happen if there was a sudden power outtage. The unit would just shut off. The chances of this happening honestly are pretty rare. The only downside I can see is if it isnt run through the shutdown sequence regularly. Is that one would have to a.clean b. Rebuild the unit with new glow plug and seals after cleaning the combustion chamber of soot.
Would this heat a 400sqf area
Pretty sure it would without any issues. Of course if the place is insulated it will make a huge difference
It’s garbage. Worked for 3 days out of the box and got an e-10 error. Now it won’t stop shutting off after running for 5 minutes, if that *
Hmm garbage because you have an error? Have you checked your battery? One of the most common issues for an e10 error. After that check all your electrical connections. Something may have shook loose in shipping. Anyhow, contact the vendor if the issue still happens. They will make it right or help you figure out the e10 error easy to torubleshoot. Things happen but not garbage because its doing what it is supposed to. You need to figure out how to troubleshoot your equipment.
@@gladiatoroverland yeah did everything under the sun and no luck. and customer service doesn’t exist for this. Good luck with all your Chinese junk. I do appreciate the effort on your end.
@@benjaminkoch6778sorry you feel that way. Who did you contact? Customer Service doesnt exists? I have had zero issue talking with them. Also, regardless these are all very similar units and troubleshooting videos are a plenty. Good luck.
Why do you call it a 5 kw unit & not 8 kw?
This is my opinion based off of the comparative german brands these are based off off. The 8kw of a german brand is almost twice the size of these units. I feel all these u its out of china are mislabeled as 5kw-8kw but all are 5kw units based on these facts. Although it is labeled as a 5kw-8kw unit from manufacturer.
Great video. I am waiting delivery of mine, a lot better than many out there
@@Jan-pw4po thanks. Well get fancier with future reviews. Learning as we go.
Looks like .264 brass
There may be some 6.5prc and 6.5 Creedmoor, 5.56 , 300blk brass on the table in the back. But the brass in the red tray was 28Nosler with Berger 195gr
How do you prime that unit
Put a short video on the amazon page for the controller operation. Link in video description to sale page. I can always upload here if youd like.
you shouldnt need to prime it the fuel hose is short. i didnt need to prime mine.
you shouldnt need to prime it the fuel hose is short. i didnt need to prime mine.
Ive a video on how to prime the unit on the amazon page for the unit. I felt it better served to upload that there than here.