HOW TO fix horizontal lines on a Philips SmartTV with some tape ?

Поделиться
HTML-код
  • Опубликовано: 25 авг 2024
  • Philips 70PUS7555/12
    Only some 3 years after I bought this TV it failed. The warranty is gone so I have to try to fix it myself.
    It is just my personal opinion about this smart TV nothing more, nothing less. I fixed it with just a piece of tape, but to be honest, it's only fixed for 98% and I can't live with that : for me it has to be a 100% to be able to enjoy it at the fullest.
    Disclaimer : if you do this at home you do it at your own risk and I cannot take any responsibility for it if it goes wrong!
    If you liked the video please give it a thumbs up, this will help the algorithm of the channel a lot, and consider subscribing if you didn’t already 👍😀
    You can donate to support the Channel, to get some new things to make great content for you guys :
    paypal.me/atCa...
    You can find us on :
    Facebook : www.facebook.c...
    RUclips : ​​​​​ / carful
    RUclips : / harrytension
    Instagram : / car_ful_channel
    Instagram : / martens.paul
    Twitter : / paulmartens4
    Pinterest : / youtube
    Flickr : www.flickr.com...
    Tumblr : / pomas2

Комментарии • 20

  • @Kavster92
    @Kavster92 9 месяцев назад +6

    For anyone looking for information:
    The cables that send signal to the screen LED's are flat ribbon cables
    the ribbon cables get wiggled around or the contact lift a little bit and then some section of the screen/portion of the screen has lines on it.
    The best way to fix this issue is to apply pressure to the ribbon contacts once they are plugged in, but first try simply removing, then reseating the ribbon cables, if this does not work then applying tape force the ribbon to be flat and parralel with the board pushes the contacts down. It seats the cable properly in its home and makes a good connection.
    Just finished doing this to my TV, it fixed glitching and horizontal lines.

    • @CarFul
      @CarFul  8 месяцев назад +1

      In my case it didn’t push the contacts down because the tape was above AND on the underside of the ribbon. Thank you for your contribution here, it’s very much appreciated 👍😀

  • @Gnomosapien
    @Gnomosapien Месяц назад +1

    Heb vandaag mn tv binnen gekregen. En nu al een streep door mn beeld 😑 ..

    • @CarFul
      @CarFul  Месяц назад +1

      @@Gnomosapien nog onder garantie : terug inleveren… niet twijfelen 👍😀

    • @Gnomosapien
      @Gnomosapien Месяц назад +1

      @@CarFul yip, kunt u mij vertellen of dit een Oled of meer een Phillips probleem is.. ik heb altijd LG tvs gehad en vind ze nu al gebruiksvriendelijker.

    • @CarFul
      @CarFul  Месяц назад +1

      @@Gnomosapien ik denk niet dat dit typisch is voor een bepaald merk, verschillende merken hebben dit probleem en er zijn reeds tamelijk veel video’s hierover te vinden op RUclips. Hopelijk kan je je toestel vlot inruilen.😀👍

  • @ruudwhodis5554
    @ruudwhodis5554 5 месяцев назад +1

    Hoe lang heeft u de tv? Bij ons hetzelfde geval, hij is pas 2 jaar oud, ambi light werkt ook maar voor de helft van de tijd, ik ga ook maar eens met tape aan de slag! Dank u voor het uploaden

    • @CarFul
      @CarFul  5 месяцев назад +1

      Ik had ‘m net 2 jaar en twee weken … net te lang voor de garantieperiode van 2 jaar. Bedankt voor het bezoek en veel geluk met de reparatie 👍😀

    • @ruudwhodis5554
      @ruudwhodis5554 5 месяцев назад +1

      Zul je altijd zien! Dankjewel, gaat goed komen. Nooit meer een philips in ieder geval😂

    • @CarFul
      @CarFul  5 месяцев назад

      @@ruudwhodis5554 Ik Wilde het al niet zeggen maar mijn conclusie is net hetzelfde 👍😀

    • @manveersingh1971
      @manveersingh1971 5 месяцев назад +1

      I have the same problem. It fixed with a new TCON board for 10 minutes but the tape trick should work. If not i am going to remove all the resistors near the LCD as that should fix it. But the tape trick is much safer

  • @pandorawolf8239
    @pandorawolf8239 8 месяцев назад +1

    So i had 2 issues with the 50inch version, one is now fixed with this solution which is great. However the television makes this really annoying high pitched sound. Ive found out that by reducing the contrast of the television to 0 almost eliminates this issue, however the screen is very dark now. Anyone knows a solution to this?

    • @CarFul
      @CarFul  8 месяцев назад

      Sorry to hear you have that issue with the sound … did you try out a different sound-preset? This could perhaps filter out the high pitched sound. Thank you for your visit and for your contribution here and I really hope you can find a solution 👍😀

    • @audiokees4045
      @audiokees4045 7 месяцев назад

      Maybe solder a big capacitor on the voltage lines of the audio amplifier, close to it. one elko and one ceramic. 100uF and 10nF. if the audioamp has double voltages you need it twice. pitch is the switching supply get into the amp, you can also look or there are capacitors on the power board has bolled caps on top, replace these,

  • @bobcat2378
    @bobcat2378 10 месяцев назад +1

    Hi my philips tv has the lines across the bottom 25% of the screen,what is the tape actually doing?i can see you have stuck it on thr ribbon but how does this fix it,what is causing the problem?Thanks,Richy.

    • @CarFul
      @CarFul  10 месяцев назад

      Hi Richy , my TV had the same problem as yours. I don’t know the cause … I only know that the tape can fix it as it also does on a lot of other brands. Hope you can fix it on yours too … good luck 👍😀 … remember… if you do it yourself… you do it at your own risk and there’s no guarantee 😀

    • @bobcat2378
      @bobcat2378 9 месяцев назад +1

      @@CarFul Will give it a go thanks>😂

    • @inahorojunior9518
      @inahorojunior9518 4 месяца назад +1

      @@bobcat2378 did it work please

    • @megalomaniacal
      @megalomaniacal 20 дней назад

      @@bobcat2378 So did we fix it?

  • @GetAnswerly
    @GetAnswerly 9 месяцев назад

    Why does it happen?