*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Thanks for watching and subscribing my channel . Dear Sir Please share this video among your friends and groups. Its 90 degree cut capacity is 3 inches . Its 45 degree cut capacity is 2.25 inches Its rip cut capacity is 26 inches
Dear Sir Thanks for watching and subscribing my channel .Thanks for your love support and inspiration. Please share this video among your friends and groups.
Sir, Kindly make review video of Stanley SST1801-B1. I am planning to buy but I didn't find any review video of it. Sir please it is my humble request. If you know any video about it then kindly share with me. Thank you.
Hello Sir, I need help on a particular installation. I have 6 mm HPL and i want to instal it on ceiling & wall with tongue & groove method. Which machine will help me create those grooves
सत श्री अकाल बहुत अच्छी मशीन है और आप वीडियो भी बहुत अच्छी बनाते हैं आराम से सब कुछ समझाते हैं आपके बारे में मुझे मोहम्मद सैफी जी ने बताया था आप भी जालंधर के हैं और मैं भी जालंधर में ही रहता हूं बहुत खुशी हुई यह जानकर कि आपने भी यूट्यूब चैनल बनाया है वैसे मेरी लैंग्वेज पंजाबी है मैं सिर्फ यूट्यूब पर ही हिंदी भाषा का इस्तेमाल करता हूं🙏👍👍👍👍👍👍👍👉❤🇮🇳
Thanks Sir I am grateful to you for your applause. Your comments are very good and your words are very appealing. You carefully watch everyones video. Mohammad Ayub Saify is a great personality, a celebrity carpenter and a successful youtuber. He inspires me a lot. He told me that when he comes Punjab he will meet me at Ludhiana. I am from Ludhiana.
@@sagguharjit88 सर माफी चाहता हूं मैं कम पढ़ा लिखा हूं इंग्लिश का कमेंट पढ़ नहीं सकता और ना ही आपका रिप्लाई समझ सकता हूं आपकी बहुत मेहरबानी होगी अगर आप रिप्लाई हिंदी या पंजाबी में करें
Dear Sharib Thanks for watching and subscribing my channel. If your blade is not at 90 degree even if you have adjusted the lever full, then you will have to adjust the whole housing of the machine by overturning the machine. Thus to set the blade at 90 degree you will have to adjust the housing along with the motor itself. See if it works.
Thanks for watching and subscribing my channel . Thanks for your love support and inspiration. Dear Sir Please share this video among your friends and groups. Price was Rs. 18000
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir Please share this video among your friends and groups. This is Stanley Table Saw
@@sagguharjit88 Thankyou too for replying my query. Guide me please. I'm a beginner and want to do some carpentery as a hobby as I'm a cancer survivor and have nothing to do at home. I don't have much tools. Just have hand saw, hammer, drill machine, chisel and a right angle. I tried to make a frame for a bench but couldn't succeed. I need some guidance. I'm also from Punjab.
Dear Ujjwal Its very good hobby you should continue. Buy a measuring tape and start making boxes or nests for birds. I have some spare tools like electric planner trim router and a jigsaw. You can pick them and use..9814104088
@@sagguharjit88 Respected Harjit ji So nice of you for offering me such a beautiful gift. I should bow myself down in gratitude infront of you as no one can offer or give such a respect and love to any unknown person. It's really a heart warming gesture shown by yourself. You are really a heart winning personality Saggu ji. Thanks a tons once again. SSA ji. 🙏🙏🙏
Dear Sir Thanks for watching and subscribing my channel you can also watch my video regarding the shortcomings of this table saw on my channel. I have already made the video.
Dear Syed Thanks for watching and subscribing my channel.I purchased it for₹ 18000 from Ludhiana. It is also available on amazon but its 4000 costlier.
Dear Hassan It has normal noise. But it wont have soft start function. It makes abrupt sound when started but running smooth while cutting the noise decreases considerably low.
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir Please share this video among your friends and groups. This machine is under budget. Shortcomings are adjustable and removable so....
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir Please share this video among your friends and groups.
*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Dear Lakshya
Thanks for watching and subscribing my channel .
Thank you for this video. Would love to see your fixes for these issues.
Dear H S Jawanda
Thank you very much for watching and subscribing my channel.
The way you explain sardar jee m loving it, amazing subscribed you because you dont hide things and explain in detail
Thanks for this video, kindly explain regarding i. e working how much thickness and width wood can be cut.
Thanks for watching and subscribing my channel .
Dear Sir
Please share this video among your friends and groups.
Its 90 degree cut capacity is 3 inches
. Its 45 degree cut capacity is 2.25 inches
Its rip cut capacity is 26 inches
Nice video with honest description... thank you Paji... please share link to buy too
Dear Sir
Thanks for watching and subscribing my channel .
Aap ka bohot shukriya mebhi machine kharid na chahatah tha lekin isme kamiya hai sir dikhane ke liye thank you so much sir.
Sir
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.
बहुत अच्छी मशीन है मेरे पास अभी नहीं है मेरे लिए यह मशीन ले पाना अभी शायद एक सपने जैसा है लेकिन मैं एक दिन जरूर लूंगा🙏👍👍👍👍👍👍👉❤🇮🇳
Mera bi dream hai
Bahut bahut bdhiya sardar ji.. bahut bdhiya..
Dear Sir
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.
Please share this video among your friends and groups.
Very nice video. Please make a video on blade alignment and blade 90 degree alignment. Thank you.
Dear Registrar
Thank you for watching my video and valuable comments. I shall make a video how I fixed its shortcomings.
Thank you for this video Sir.
Sir
Thanks for watching t
my channel .
Sir, Kindly make review video of Stanley SST1801-B1. I am planning to buy but I didn't find any review video of it. Sir please it is my humble request. If you know any video about it then kindly share with me. Thank you.
Hello Paji, plz create or share if already created the video for fixing the issues with the saw
Dear Sir
Thanks for watching and subscribing my channel .
The video is already posted on my channel.
ruclips.net/video/Lc5srrbP93k/видео.html
Very good video...
Dear Sir
Thanks for watching my videos .
Nice information
Dear Sir
Thanks a lot.
What price of this unit. Wher available?
Thanks for watching and subscribing my channel. I purchased this machine for Rs 18000/- from Ludhiana
Very Nice Video
Dear Sir
Thanks for watching and subscribing my channel.
Wow nice
Dear Sir
Thanks for watching my channel.
May I know it is single phase or 3 phase ?
Thanks for watching and subscribing my channel
Its just single phase normal machine.
Can it getting pune
Dear Ganesh
Thanks for watching and subscribing my channel I bought this machine from ludhiana it is online available also
Rs❤
21000/- SIR
Parabéns pelo vídeo, já deixei meu like, abraço!
Dear Sir
Thanks for watching and subscribing my channel.
Hello Sir,
I need help on a particular installation.
I have 6 mm HPL and i want to instal it on ceiling & wall with tongue & groove method. Which machine will help me create those grooves
Dear Sir
This link may help you
ruclips.net/video/WPJO7bBjaLk/видео.html
सत श्री अकाल बहुत अच्छी मशीन है और आप वीडियो भी बहुत अच्छी बनाते हैं आराम से सब कुछ समझाते हैं आपके बारे में मुझे मोहम्मद सैफी जी ने बताया था आप भी जालंधर के हैं और मैं भी जालंधर में ही रहता हूं बहुत खुशी हुई यह जानकर कि आपने भी यूट्यूब चैनल बनाया है वैसे मेरी लैंग्वेज पंजाबी है मैं सिर्फ यूट्यूब पर ही हिंदी भाषा का इस्तेमाल करता हूं🙏👍👍👍👍👍👍👍👉❤🇮🇳
Thanks Sir
I am grateful to you for your applause. Your comments are very good and your words are very appealing. You carefully watch everyones video.
Mohammad Ayub Saify is a great personality, a celebrity carpenter and a successful youtuber. He inspires me a lot. He told me that when he comes Punjab he will meet me at Ludhiana. I am from Ludhiana.
@@sagguharjit88 सर माफी चाहता हूं मैं कम पढ़ा लिखा हूं इंग्लिश का कमेंट पढ़ नहीं सकता और ना ही आपका रिप्लाई समझ सकता हूं आपकी बहुत मेहरबानी होगी अगर आप रिप्लाई हिंदी या पंजाबी में करें
ਲਾਡੀ ਭਗਤ ਜੀ
ਮੇਰਾ ਉਤਸ਼ਾਹ ਵਧਾਉਣ ਲਈ ਬਹੁਤ ਬਹੁਤ ਧੰਨਵਾਦ ਤੁਹਾਡੇ ਕੁਮਿੰਟ ਬੜੇ ਅੱਛੇ ਹੁੰਦੇ ਹਨ ਲੱਗਦਾ ਹੈ ਤੁਸੀਂ ਹਰੇਕ ਵੀਡਿਓ ਨੂੰ ਬੜੇ ਧਿਆਨ ਨਾਲ ਦੇਖਦੇ ਹੋ ਤਾਂ ਹੀ ਕੁਮੈਂਟ ਵਧੀਆ ਕਰਦੇ ਹੋ
ਮੁਹੰਮਦ ਅਯੂਬ ਸੇੈਫੀ ਬਹੁਤ ਵਧੀਆ ਇਨਸਾਨ ਹੈ ਇਕ ਸੈਲੀਬ੍ਰਿਟੀ ਕਾਰਪੇਂਟਰ ਹੈ ਅਤੇ ਇਕ ਸਫਲ ਯੂ ਟਿਊਬਰ ਹੈ. ਉਸ ਦਾ ਕੰਮ ਉਸ ਦੀ ਨਿਮਰਤਾ ਤੇ ਹਲੀਮੀ ਮੈਨੂੰ ਬਹੁਤ ਪਸੰਦ ਹੈ.ਮੈਂ ਲੁਧਿਆਣੇ ਤੋਂ ਹਾਂ
@@sagguharjit88 सर बहुत अच्छा लगा आपका रिप्लाई पढ़कर मैं जालंधर से हूं🙏
@@laddi6615 Ji
Thanks
Please sir mujhe bhi table saw Lena hai kon sa aacha rehta hai? Please reply
Thanks for watching and subscribing my channel .
This is the cheap and best table saw.
You can also buy DeWalt or Bosch Table Saw
Kindly also provide the video where you correct the shortcomings......
Dear Aditiya
I do shot the video on the shortcomings of this table saw as soon as possible.
ਸਰ ਐਪ ਨੀ ਟੇਬਲ saw ka material kon sa hi Nhi Batyaa
Sir
Its made of plastic and aluminium. Stand of steel
Extende karne ke baad iski size kese set kare.... Machine ke scale ke help se
Sir mere paas h yeh machine isme bevel angle streight ni h means 90 degre me ni h left side jhuka hua full setting kare to bhi kya iska koi solution h
Dear Sharib
Thanks for watching and subscribing my channel. If your blade is not at 90 degree even if you have adjusted the lever full, then you will have to adjust the whole housing of the machine by overturning the machine. Thus to set the blade at 90 degree you will have to adjust the housing along with the motor itself. See if it works.
Wah saggu'z saab
Dear Karamjot
Thanks for watching and subscribing my channel .
Bahuth kush
huwa bhayya
Dear Parsad
Thanks for watching my video and subscribing my channel
How much price ???
Thanks for watching and subscribing my channel .
Thanks for your love support and inspiration.
Dear Sir
Please share this video among your friends and groups.
Price was Rs. 18000
How to make it saw blade 90 degree always
Dear Sir
Thanks for watching and subscribing my channel. Soon a video on this topic will be uploaded.
Kia price hai is table saw ka
Dear Sir
Thanks for watching and subscribing my channel.
Its price is Rs. 18000/-
this is Bosch GTS 254
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir
Please share this video among your friends and groups.
This is Stanley Table Saw
Etne logone machin ka kimtat kitna hai pucha pr aapne bataya nahi .
Dear Sir
Thanks for watching and subscribing my channel
Price of this machine was18000/-
Short comings kaise aapne theek kiya. Please video banaiye.
Dear Raaj
Thanks for watching my video. I shall shoot that video as soon as possible.
nice!!
Thanks Kanwarbir
Price
Thanks for watching and subscribing my channel .
Price was 18000/-
very big mistake table saw kon saw matirea hi
Bhaji rate ni dasseya!! Kithon milugi, eh vi das dena si.
Dear Ujjwal
Thanks for watching and subscribing my channel. This machine I bought from Ludhiana, GoodWill Tools Gill Road for Rs. 18000/-
@@sagguharjit88 Thankyou too for replying my query. Guide me please. I'm a beginner and want to do some carpentery as a hobby as I'm a cancer survivor and have nothing to do at home.
I don't have much tools. Just have hand saw, hammer, drill machine, chisel and a right angle. I tried to make a frame for a bench but couldn't succeed. I need some guidance. I'm also from Punjab.
Dear Ujjwal
Its very good hobby you should continue. Buy a measuring tape and start making boxes or nests for birds. I have some spare tools like electric planner trim router and a jigsaw. You can pick them and use..9814104088
@@sagguharjit88
Respected Harjit ji
So nice of you for offering me such a beautiful gift. I should bow myself down in gratitude infront of you as no one can offer or give such a respect and love to any unknown person. It's really a heart warming gesture shown by yourself. You are really a heart winning personality Saggu ji.
Thanks a tons once again.
SSA ji.
🙏🙏🙏
Rate
Dear Sir
Thanks for watching and subscribing my channel
Price 18000/-
Hello sir.
,What will be the price for this machine
Dear Sir
Thanks for watching and subscribing my channel.
21000/- Rs.
Thank you
Price kya h sir iska
Dear Sir
Thanks for watching and subscribing my channel. The price of the machine was 18000/-
please kamiyaan kaise aap ne sahi kiya yeh bathaayiye....
Dear Sir
Thanks for watching and subscribing my channel you can also watch my video regarding the shortcomings of this table saw on my channel. I have already made the video.
Rs kya hai
Thanks G Saggu
Thanks for watching and subscribing my channel. Thanks for your love and support
Price is 18000/-
JULFKAR artest
@@JulfukaeAnsari Ji
Thanks for watching and subscribing my channel.
Price abhi kya h sir ji
Dear Sir
Thanks for watching and subscribing my channel. The price of this machine is now 19000
Rs
Thanks for watching and subscribing my channel.
Rs 22000
From where you have purchased the item?
Its from Ludhiana
Goodwill Tools Company. 18000/-
its available online also.
@@sagguharjit88 please send mobile no. & shop address
@@ashishbandawar6535
9888810713
Goodwill Machine Tools Ludhiana
Mujhe bhi chahiye but mahngi hai mere liye
Thanks for watching and subscribing my channel.
You can make a table saw from circular saw
Its very cheap
Watch my video on Granite Top Table Saw
Here is the link
ruclips.net/video/W_XkTPRQw3A/видео.htmlsi=s9aLt9EDV4sLyBRR
Price Kitna hai
Now 21000 Sir
I want to purchase,how can I? from Assam
Dear Syed
Thanks for watching and subscribing my channel.I purchased it for₹ 18000 from Ludhiana. It is also available on amazon but its 4000 costlier.
Please sir price batana
Short comings fix karne ka video daliye
Dear Sanjay
Definitely I shall shoot and upload the video as soon as possible.
Nashik me milega
Milna chahie
You can also buy online
Price kya hai is machine ka
Thanks for watching and subscribing my channel. I bought this for Rs. 18000/-
Sir jee noise ziyada hai?
Dear Hassan
Thanks for critically watching and subscribing my channel
Sir jee stanley table saw ki noise ziuada hai yeah kam?
Dear Hassan
It has normal noise. But it wont have soft start function. It makes abrupt sound when started but running smooth while cutting the noise decreases considerably low.
Sar is machine ki kimat bataiye price bataiye
Dear Abdul
Thanks for watching and subscribing my channel.
Price 18000/-
Sir jii Kuch Aur Acha company ke videos bana o. India 🇮🇳 joh mil suky. Ustad jiii. Price ke saat Bol dena
Dear A Husain ji
Thanks for watching and subscribing my channel.The price of this machine is 18000/-
I do, what you said
@@sagguharjit88
Photo frame 🖼 ke Coner 45 drg sahi. Se When we cut 1/2 frame
Rs💵
18000/-
Price please
Dear K Singh
Thanks for watching and subscribing my channel so the price of the machine was 18000
Isme itni kamiyan h..kaun lega ise
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir
Please share this video among your friends and groups.
This machine is under budget. Shortcomings are adjustable and removable so....
Talhank's
Prise to batao ar kaha milaga
Dear Sunil
Its Price was 18000/-
I purchased it from tool market Ludhiana.
Namber
Thanks for watching and subscribing my channel .Thanks for your love support and inspiration.Dear Sir
Please share this video among your friends and groups.
Shortcomings kaise fix ki bhai?
Dear Sir
Thanks for watching and subscribing my channel.
See my video
ruclips.net/video/Lc5srrbP93k/видео.html
Price
Dear Sir Thanks for watching and subscribing my channel. Rs. 18000/-
Sir machine ki price kitni hai
Dear Priti
Thanks for watching and subscribing my channel.
21000/ Now
Price
Dear Sadiq
Its price is 18000/-