Hey i just want to say thank you for all you do to help people. My car was in accident and I was able to remove the airbag module and seat belt for reset instead replacement. I've replaced the airbags and clock springand the airbag light is off now. One more thing i would like to get rid of is that noise "bip bip bip bip" when moving forward or reverse and the meaning of the front hood red flashing light on the screen board. Thanks
A big Thank You to you for instructions on how to navigate and find the message behind the warning light. I was worried about driving the car and was relieved to find out the message was to "Check Brake Light" and the picture of the car on the dash indicated it was the left brake light. The warning light disappeared after I pressed on the brakes to have my friend check both lights and then again to put the car in reverse to check the white "reverse" lights; both brake and reverse lights were working just fine unless it was an advance indication that one of them was going bad. Anyway, thanks again for your help!
It is possible a light bulb may fail intermittently, but I would have the switch at the brake pedal inspected because on some years this switch has a plastic washer that breaks after a few years (it looks like small bits of white plastic), causing the switch to malfunction - this will also impact the ability to move the gear selector out of Park
I was able to locate a owners manual for 2020 Hyundai Elantra sel and the triangle with exclamation mark on dashboard says it may be the rear blind spot sensor. Car has abrasion on right rear bumper and looks like another car just grazed the bumper but it did leave a mark on bumper. And thinking that is what set off warning lightt on dashboard. eBay has used ones for 100 dlls. New sensor over 1000 dllrs. Thanks for the video
I have experienced it few days ago it will come if there’s any issues such as bonnets open it will start flashing in a GS300 Lexus or if there is a low pressure tyre. As soon you fix the issue the warning light disappeared. I giggled it: This same symbol, an exclamation point in a triangle, in yellow/amber has been used by European and Asian vehicle manufacturers in two ways. First, it indicates a fault in the vehicle’s Stability Control System, as well as a slip indicator. Click here for more. The vehicle can be driven with caution, but without the benefit of the advanced electronic control system. Second, it is used in many cases to indicate that a text warning is available in the vehicle’s Information Display. It may involve a malfunction in any system. A Check Control message will likely require changing screens to discover the root problem.
What would the triangle warning lightt be problem for 2020 Hyundai Elantra sel? I don't have an owners manual for the car? Thanks for video any feedback appreciated
Radar sensor problem. Very expensive. Happens if you hit your rear bumper even just slightly. See here in the comments section ruclips.net/video/0v-bTD5nIs8/видео.html
@@alinbaraiac1543 I have the issue until now, it going sometimes but it returns again. When I check the computer of the car it gives me the code (C1606:46) with the description of "ECU Software error" from the categorie of (LDWS).
Hey i just want to say thank you for all you do to help people. My car was in accident and I was able to remove the airbag module and seat belt for reset instead replacement. I've replaced the airbags and clock springand the airbag light is off now. One more thing i would like to get rid of is that noise "bip bip bip bip" when moving forward or reverse and the meaning of the front hood red flashing light on the screen board. Thanks
Such wonderful things you can learn by reading the owner's manual.
Thank you for telling me to not worry I was about to freak out I don’t need no more lights to come on 😩😩
Im not understanding what I do for this problem
Thank you friend and GOD Bless ❤
Thanks bud ! I freaked out but it was just headlights getting low
A big Thank You to you for instructions on how to navigate and find the message behind the warning light. I was worried about driving the car and was relieved to find out the message was to "Check Brake Light" and the picture of the car on the dash indicated it was the left brake light. The warning light disappeared after I pressed on the brakes to have my friend check both lights and then again to put the car in reverse to check the white "reverse" lights; both brake and reverse lights were working just fine unless it was an advance indication that one of them was going bad. Anyway, thanks again for your help!
It is possible a light bulb may fail intermittently, but I would have the switch at the brake pedal inspected because on some years this switch has a plastic washer that breaks after a few years (it looks like small bits of white plastic), causing the switch to malfunction - this will also impact the ability to move the gear selector out of Park
Thanks bro! My brothers 2015 Hyundai Sonata sport 2.0T has this issue. I just resetted the maintenance thingy haha
How do you reset the maintenance 🥺!??
I was able to locate a owners manual for 2020 Hyundai Elantra sel and the triangle with exclamation mark on dashboard says it may be the rear blind spot sensor. Car has abrasion on right rear bumper and looks like another car just grazed the bumper but it did leave a mark on bumper. And thinking that is what set off warning lightt on dashboard. eBay has used ones for 100 dlls. New sensor over 1000 dllrs. Thanks for the video
I deeply appreciate you
I have experienced it few days ago it will come if there’s any issues such as bonnets open it will start flashing in a GS300 Lexus or if there is a low pressure tyre. As soon you fix the issue the warning light disappeared. I giggled it:
This same symbol, an exclamation point in a triangle, in yellow/amber has been used by European and Asian vehicle manufacturers in two ways. First, it indicates a fault in the vehicle’s Stability Control System, as well as a slip indicator. Click here for more. The vehicle can be driven with caution, but without the benefit of the advanced electronic control system.
Second, it is used in many cases to indicate that a text warning is available in the vehicle’s Information Display. It may involve a malfunction in any system. A Check Control message will likely require changing screens to discover the root problem.
Mine is telling me my headlights are low?? I just want the chime to go away!
Thanks a lot!! 😊
Thanks for your help. I'm so subscribing to your channel
Welcome
Thanks I got it my head light was low thanks for vdeio
what about seat ibiza having it? how do I check what it is
Thank you so much!
Hyundai sonata 2018 year. I have the same problem. check smart high beam system gives error. how do these errors go away? please help me.
What would the triangle warning lightt be problem for 2020 Hyundai Elantra sel? I don't have an owners manual for the car? Thanks for video any feedback appreciated
Look up online for a pdf manual. May search "Elantra (year) owners manual pdf"
Thanks bro
👌
Mine says check blind spot collision warning system. Not sure what that means
Radar sensor problem. Very expensive. Happens if you hit your rear bumper even just slightly. See here in the comments section ruclips.net/video/0v-bTD5nIs8/видео.html
I have same check but it's about AEB system.
How did you fix it with the AEB system?
@@alinbaraiac1543
I have the issue until now, it going sometimes but it returns again. When I check the computer of the car it gives me the code (C1606:46) with the description of "ECU Software error" from the categorie of (LDWS).
This scare me
Scarce me
Please have you solved this issue yet? How was it resolved please?
Web site with car error codes explained www.autohelpers.net/hyundai/