Actually look in your speakers that cost thousands, they use wire thinner then headphone wire, and on them crossovers you will see them big white resistors........ Rectangular blocks beyond an inch long ....... they are called resistors for a reason..... their value denotes how much they will let through...... Typically, they will let 10watts through fine enough, but the more you crank, the less you get..... 50w to about 12w.... 100 to 15w........ 200 to 30w (which is the tweeters actual maximum) go buy a tweeter and see its power rating..... so thats why they rate their speakers at 200w capable.... thru mids you will only get max about 45w, and your bass with massive magnets and windings will do 100w if your lucky... So, turn up your amps, heat up them resistors inbedded with white concreate mix and see your electricity bills........ 60% of them are due to heating them resistors up.... You are all being conned........... but who cares when your rich, and you have shnodders who work for you and you just sit back..........and relax......
Hi Zak how are you doing today buddy? Is this your house in Colorado? Because I remember you said that you owned a house in Colorado. That is a gorgeous View of the Mountains!!
For bi-amping speaker. Most High end Speakers come set with 2 input terminals. 1 set goes to the MID and Hi range, The other goes to the low or woofer.
Thank you for your comment. If you have any questions or need assistance, feel free to call our specialists at 877-417-9000 or schedule a free video consultation!
How many Dream Media employees does it take to unbox a monoblock amplifier? 😅🤣😂 You can tell the quality by the weight and girth. Michi, for when the Rotel brand isn't quite high end enough for you😅🤣
I think 1,000watt at 8ohm, 1,800 @ 4ohm..... single xlr equals single channel which is bi-ampable (one pair for mids and trebble above 2,300hz? And the other pair for sounds below 2,300hz...... the hz value being my guess, that value might even be adjustable....... im sure its eaisily googled........
Has anyone noticed the view through the window?
Where is it located?
@@МатвейФест Would like to know also.
The first thing I noticed, a very nice view 😍
The view is from Colorado. It is beautiful.
You mean you've never seen the snow cap mountains on the outskirts of Dallas?
another video well done..holy thats a beast of an amplifier .....love the house too....cheers all....and be safe
What a BEAST of POWER. I bet the speakers you gon be hooking it up with, are as POWERFUL.
Awesome video as always man.
Actually look in your speakers that cost thousands, they use wire thinner then headphone wire, and on them crossovers you will see them big white resistors........
Rectangular blocks beyond an inch long ....... they are called resistors for a reason..... their value denotes how much they will let through......
Typically, they will let 10watts through fine enough, but the more you crank, the less you get..... 50w to about 12w.... 100 to 15w........ 200 to 30w (which is the tweeters actual maximum) go buy a tweeter and see its power rating..... so thats why they rate their speakers at 200w capable.... thru mids you will only get max about 45w, and your bass with massive magnets and windings will do 100w if your lucky...
So, turn up your amps, heat up them resistors inbedded with white concreate mix and see your electricity bills........ 60% of them are due to heating them resistors up....
You are all being conned........... but who cares when your rich, and you have shnodders who work for you and you just sit back..........and relax......
Not sure about the M8 but with my p5/s5 setup, the remote controls both units so you don't need the trigger cable.
Cool amps. i would like to hear them somewhere.
I would need Affirm for this purchase :-)
Hi Zak how are you doing today buddy? Is this your house in Colorado? Because I remember you said that you owned a house in Colorado. That is a gorgeous View of the Mountains!!
massive amplifier love monobloks amp.
Very Good!!!
Hai bro iam big fan of you 😍😍
A monoblock with TWO speaker outputs? What am I missing here? Dual mono?
For bi-amping speaker. Most High end Speakers come set with 2 input terminals. 1 set goes to the MID and Hi range, The other goes to the low or woofer.
Can you even tell a difference in quality between that expensive thing and say a CROWN CE4000 That has twice the power?
Those big fans anulates that 0.03 THD. Goodby dark background
Thank you for your comment. If you have any questions or need assistance, feel free to call our specialists at 877-417-9000 or schedule a free video consultation!
Why does a monoblock amp need a remote?
The unit has a display showing temperature and can switch between a spectrum analyzer display or a VU meter display.
How many Dream Media employees does it take to unbox a monoblock amplifier? 😅🤣😂 You can tell the quality by the weight and girth. Michi, for when the Rotel brand isn't quite high end enough for you😅🤣
1800w at 4 ohm😲
JESUS CHRIST LOVES YOU AND CARES FOR YOU HAVE A GOOD DAY EVERYONE
not 1800 watt ... twice the power of the stereo S5 ... so 2x 500 watt.
It's stereo not monoblock
No, it's mono, note only one XLR/RCA input. Dual power outputs will be for bi amplified speakers.
This M8 is monoblock.
The S5 is stereo.
Fellas it's just a piece of metal/plastic - too much more emotions...
Oh come on, you're laughing like a horses!
Two questions:
How is it 1000 watts "per" channel when its only a single channel amplifier??
And why make videos of things you know nothing about?
I think 1,000watt at 8ohm, 1,800 @ 4ohm..... single xlr equals single channel which is bi-ampable (one pair for mids and trebble above 2,300hz? And the other pair for sounds below 2,300hz...... the hz value being my guess, that value might even be adjustable....... im sure its eaisily googled........
I also guess each bi amped outlet is variable to 60/40% typically of its total value
@sadikfarhan
He never said "per" channel". He does know what he's talking about. Please delete your ignorant comment.
Thank-you