Very nice! I also built a travel ukulele based on the CircuitsAndStrings template, but I went the other direction and made mine a tenor. I had difficulty with tuning as the strings did not want to slide on the grooved dowel on the back end. Eventually I found some tiny ball bearings and made independent rollers (one per string) that made tuning a breeze. I like your routed pocket. No doubt more volume than my uke with none. As I often practice at 4:30AM perhaps the low volume has saved my marriage! Your illustrated construction is very clear. Thanks for sharing!
Nice! I actually like very much that it is not electric. It might not be very loud, but it is loud enough to use in a hotel room without disturbing the neighbors.
Great build, thanks for sharing, I love the time and effort you've put into the post production, makes watching a great build even more entertaining. Looking forward to trying my hand at making one.
Mike Hawkey thanks. I've been looking at the cheap eBay friction pegs and cheaper frets. I'm a bit concerned I'll get what I pay for. Have you tried the cheaper hardware available? any issues with it?
I don't mind the cheap but not cheapest friction pegs like the ones in my video. I'd avoid the ones that don't have the white plastic washer - some just have a tin washer.still cheap but function well for friction.frets wise unless you buy rods, the eBay packs are pre curved so that adds complexity to the build. On the fret case I've used stew mac for my supplies.
Ive desided to make my own based on your design and circuit in strings design plans, all i have left to do is put on the bridge and string it. Im 17 and the first time ive made anything like this. Its made of dark walnut and looks incredable. Thanks for the motivation
A co called Risa makes a line of them with nylon strings and a high quality piezo pick up. Made in Germany I believe, very well built (not cheap) and sound amazing amped and with effects. I have one and love it but difficult to tune and you definitely have to adjust to no headstock. But it’s the best set up instrument I own.
I would make a little sleeve to fit over the "body" of it (with a hole of course) so when playing it it doesn't get untuned by accidentally pressing on your leg
This would be so handy, not to mention fun to make! I recently bought a cheap plastic uke to bring on a flight because I was afraid the airport would give me trouble on the way home (my uke didn't fit size requirements) and I'd have to leave it there!
I'd expect the plastic one would give you more volume, but a shame to have to buy and leave if one cant fit into bag/case. Have a go at building one! Thanks
I love it that you can hear the rain in the video, it just does make it feel so genuine! Also I love all your answers in the comments. You can never make a too small instrument! I just wonder how I can make this kind of Uke to be able to use it on an amp! Cheers man good nice job and a nice video!
Hi, thanks for the comment. Small instruments turned smaller is clearly a polarising issue! haha. Making electric is absolutely possible. I'd make slightly deeper as this one is thin an drilling holes for cables and plugs would be very close (unless you use a 3.5mm jack). You can buy piezo rod pickups that go under the bridge. Simply a case of modifying to fit one of those and doing some careful drilling and done! Thanks for stopping by to comment.
Very nice. I have a Risa Uke Stick (sadly no longer in production) and it looks a lot like your uke. You can put a piezo bridge pickup under the bridge and make it electro-acoustic.
I didn't know Risa had stopped. Was going to buy one one day - might just make a new version of this. Did consider making it electro, but it really was for night time practice to no wake the family, so I didn't bother...this time...
Awesome work mate. If you ever consider selling one of these, I live in the Manawatu and have a mate who's learning the ukulele. He travels a lot for work and could practice on one of these without upsetting other motel guests. I'd love to put him in touch.
Hi. Many thanks. Currently very time limited in the worksop with a backlog of personal projects. I'll comment back if things change. You could point him to 'the peanut' which can be had very cheap version 1 now on Aliexpress. Ive read mixed results on their pickups - but that would be a secondary on the main use you reference anyway (although could use with a headphone amp connected to smart phone for a bit of fun). Cheers
Love that it kinda looks like an oar considering they are synonymous with the Pacific islands people's. I'm curious what the coin is? A Hawaii quarter would be fitting.
A TRAVEL UKULELE? Like, it is already the smallest instrument out there. If your ukulele takes up too much space, you should try playing upright bass or something for a while :P
Or... make an upright bass with an opening back to pack all your holiday gear in! that way you can still just carry on (quite big) thing :) ruclips.net/video/2GVjcsHKKKc/видео.html - another option!
It is a matter of not only being smaller, but being able to handle abuse a bit more than a standard Ukulele. Because the body can be fragile in a suitcase.
Hi. Drill bits to suit the tuners one uses. Some are 8mm. Whole unit about 18-19mm thick. “Sound hole” area approx 16mm deep. Bridge mounting slot approx 5mm.
andy rocksteady that one I made myself. I know one can get tattoo grips on eBay that work but a bit thinner spacing. Maybe some clever bolt and bearings or washers?
I live in a country where we don't have Yard sales or easy access to this tools (At least not for cheap) but I think this could be done with a CNC machine and then work a lot with a file and sandpaper. Check if you can find someone offering those types of services. Maybe even a laser cutting shop or a hackerspace.
This could be done with really basic, old hand-tools. Straight and sharp lines and smooth corners may be harder without practice, but there are techniques for everything. Power-tools and very specific tools simply make life easier.
Sí, es posible. Echa un vistazo al canal Circuits and Strings. Creo que Daniel ha hecho uno similar con una tapa. Sin embargo, es una cavidad pequeña, por lo que el sonido seguirá siendo bajo. ¡Gracias!
I've watched this several times now and I love it! Great idea great execution but the only question I have is how close is the attenuation and could you make something to make it exact?
Do you mean intonation? - if so i generally use a fret scale calculator. They are pretty good, but things like string height (if too high) will put the tone out. On ukulele’s with a single bridge its always a minor weigh off vs say an electric with individually adjustable setups.
@@MikeHawkey lol yes 😆. You gave me an idea for a base guitar. Something I could build at my toolbox during down time at work. Plane and simple. Basically a practice instrument. Thanks much
Yo Mike, this is an awesome build and I wish I could be able to build it myself based on this video, but to help me get the most detail that hammering piano tune gets in the way and also booms up on loud speakers or ear buds, so please consider just a few decibels down, thanks bro!!! :D
i'm not ragging on this build at all, totally cool, i just have to say this in the name of comedy. "Travel Uke...when a regular uke is just too damn big to pack around with you." Billy mays here with another FANTASTIC product. Are you a bohemian Uke god but dont have the upper body strength to carry heavy gear and instruments up the mountain with you? well, good news, everyone, the new travel Uke is a full 3 inches shorter then a regular uke with only 103 percent of the normal weight. sure its quiet, but think of the extra space you'll have for your granola bars and a beanie now that you have replaced that ancient ol wood uke, with a slightly tinier instrument of the same material. only 3 easy payment of 19.95 plus shipping and handling, but call now cuz we cant do this all day and we will send you a SECOND unplayably tiny instrument. thats over .9 pounds of Hawaiian juju for only 19.95, but wait there's more. if you call in the next 10 minutes, you will also recieve the tiniest pick ever conceived, the tiniest backpack ever made, smaller hands, and girlfriend with armpit hair who hates gluten. thats over an 80 dollar value for just 4 easy payments of 19.95. spill some homemade organic honey on it? clean it up with the tiniest eyedropper of oxy-clean ever made at no extra charge.
Could do, agreed. Its pretty hard wood and coated in cyanoacrylate at the bridge roller end. If it did wear through, there is a metal rod, so it would still serve its real purpose of a string spacer - wouldnt affect playability. Plenty of older instruments use wooden nuts and bridges and are still going after all these years, so I don't anticipate any early failure.
i play ukulele here and there and thought this would be a great little project for me because i’ll be taking my second year of engineering this year (i’m a sophomore) and most of these tools are in the school’s wood shop. do you think i could pull it off?
I made a little wooden stop on my saw that was stuck on with double side tape. Stops the saw at the same depth fret legs are. Alternative is just take it super slow and measure, or go over and fill sides with sawdust and glue. Hope the build goes well.
im interested in making one of these so i can take it places and carry it in a book bag but i have little wood working experience let alone ukulele making experience, any tips?
HI. Have a look over at circuits and strings also for ideas. I think cutting the centre without a back plate would be easier. Frets can be tricky. You could just glue skewer ones on rather than use fret wire. That's worked fine on a few projects I made. Measure twice cut once and take your time. Good luck!
Hi, my wood was about 20mm thick. If you are thinking about adding a pickup, might pay to make it slightly thicker as its fairly slim. Thanks and good luck!
Hey, really interested in making this little buddy for my journey to colombia in the summer. I really want to make on like you did and not one like circuitandstrings, got any sizes or plans? would be really awesome! thanks!
Hi, Sorry, in this instance no - The main real difference aside from scale length is the back plate in the 'sound hole' area. I just left some wood in. Also the bridge - mine is a wooden/metal part rather than Daniels modified angle piece. Good luck with your build!
Hi, I'd start with a fret calculator like this: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwiJsquMkYDjAhWUfSsKHQDPBk0QFjAAegQIAhAB&url=https%3A%2F%2Fwww.stewmac.com%2FFretCalculator.html&usg=AOvVaw10KQDFFoSzonTXB-t9RA_i then calculate the scale difference and adjust the design by that % (if you were working off a plan).
2:12
When the sawing matched up with the song, I felt sooooo satisfied
Freckle McBooty 😂😂😂
❤😂
You, sir, are an artist! This is wonderful!!!
I wish I was as handy as you to make one.
thanks for the kind words!
Wow I've found you on different comments over the past two days!
Very nice!
I also built a travel ukulele based on the CircuitsAndStrings template, but I went the other direction and made mine a tenor. I had difficulty with tuning as the strings did not want to slide on the grooved dowel on the back end. Eventually I found some tiny ball bearings and made independent rollers (one per string) that made tuning a breeze. I like your routed pocket. No doubt more volume than my uke with none. As I often practice at 4:30AM perhaps the low volume has saved my marriage!
Your illustrated construction is very clear. Thanks for sharing!
Nice one!
Nice! I actually like very much that it is not electric. It might not be very loud, but it is loud enough to use in a hotel room without disturbing the neighbors.
Thanks. Although I may make an electric one one day, my intent was as you say- non disturbing to others.
Great build, thanks for sharing, I love the time and effort you've put into the post production, makes watching a great build even more entertaining. Looking forward to trying my hand at making one.
thanks for watching and good luck with build!
Mike Hawkey thanks. I've been looking at the cheap eBay friction pegs and cheaper frets. I'm a bit concerned I'll get what I pay for. Have you tried the cheaper hardware available? any issues with it?
I don't mind the cheap but not cheapest friction pegs like the ones in my video. I'd avoid the ones that don't have the white plastic washer - some just have a tin washer.still cheap but function well for friction.frets wise unless you buy rods, the eBay packs are pre curved so that adds complexity to the build. On the fret case I've used stew mac for my supplies.
Iconi
Iconi
You did a fine job, Mike. I love all of the modifications and personalization. I know these types of videos are time consuming. Bravo!
thank you!
Wow, I just saw that this video has received a crazy amount of views. Congrats!
Ive desided to make my own based on your design and circuit in strings design plans, all i have left to do is put on the bridge and string it. Im 17 and the first time ive made anything like this. Its made of dark walnut and looks incredable. Thanks for the motivation
Nice one! sounds like you are super close to finishing it off!! If you end up sharing photos online send a link!
A co called Risa makes a line of them with nylon strings and a high quality piezo pick up.
Made in Germany I believe, very well built (not cheap) and sound amazing amped and with effects.
I have one and love it but difficult to tune and you definitely have to adjust to no headstock.
But it’s the best set up instrument I own.
Nice! - ive always planned a version 2, large concert/small tenor length with a piezo. One day!
2:20 I love how the sawing is a part of the percusion
Watching you work is hypnotic. Beautiful video, incredible final result with the instrument. Congratulations, very good job.
I like how you were sort of sawing to the beat at 2:25. Great build!
Thanks
I was confused. I was like "when is he gonna build the body?"
BlurrySecondsToMars me too
This is really cool! I like how you used colorful strings and tuning knobs to make it unique.
Mike, I think you are a true craftsman. Thank you very much for sharing the whole process. Keep up, man.
Thanks Jimmy!
Thank you so much for choosing background music that is in sync with you sawing. 2:15
awesome, man! all of your builds are just so elegant!
I would make a little sleeve to fit over the "body" of it (with a hole of course) so when playing it it doesn't get untuned by accidentally pressing on your leg
Nice idea. The friction tuners are set reasonably tight so it's not so much an issue, but could be a feature to make it a leg or belly rest too.
The friction noise from the knife adds to the background music at 2:13 !!!! :D :D
:)
I already have too many ukes 👌👌👌
Nice creation, you put lots of effort into it 💕
Thanks! Just count your blessings you don't collect double basses!
Logan you are my hero you mean the world to me
Best working with wood music I have found n RUclips so far. (Oftentimes the drums are too loud in the mix).
you are so good at craftsmanship
Thanks!
This would be so handy, not to mention fun to make! I recently bought a cheap plastic uke to bring on a flight because I was afraid the airport would give me trouble on the way home (my uke didn't fit size requirements) and I'd have to leave it there!
I'd expect the plastic one would give you more volume, but a shame to have to buy and leave if one cant fit into bag/case. Have a go at building one! Thanks
That's some mighty fine handy work sir
Very cool, how about if you were able to make some form of collapsible body so you could get some volume out of it.
This is really cool. Wouldn’t say it’s a uke , but like it’s own Instrument. Let’s call it the kion’i ukulele
Great little uku and great video!
I love it that you can hear the rain in the video, it just does make it feel so genuine! Also I love all your answers in the comments. You can never make a too small instrument! I just wonder how I can make this kind of Uke to be able to use it on an amp! Cheers man good nice job and a nice video!
Hi, thanks for the comment. Small instruments turned smaller is clearly a polarising issue! haha. Making electric is absolutely possible. I'd make slightly deeper as this one is thin an drilling holes for cables and plugs would be very close (unless you use a 3.5mm jack). You can buy piezo rod pickups that go under the bridge. Simply a case of modifying to fit one of those and doing some careful drilling and done! Thanks for stopping by to comment.
Its size is very compact.!
Nice job!😮
Thank you! Yes, very small - would fit in an oversized pocket.
sounds good.perfect for outdoor jams.easy to carry. nice work
Add a piezo rod pickup and it could be an awesome portable carry everywhere uke! Thanks for watching.
Very nice. I have a Risa Uke Stick (sadly no longer in production) and it looks a lot like your uke.
You can put a piezo bridge pickup under the bridge and make it electro-acoustic.
I didn't know Risa had stopped. Was going to buy one one day - might just make a new version of this. Did consider making it electro, but it really was for night time practice to no wake the family, so I didn't bother...this time...
Mike Hawkey looks like you can still find them in stores, on amazon and on ebay, but the risa website makes no mention of them anymore.
Cool, thanks
Awesome work mate. If you ever consider selling one of these, I live in the Manawatu and have a mate who's learning the ukulele. He travels a lot for work and could practice on one of these without upsetting other motel guests. I'd love to put him in touch.
Hi. Many thanks. Currently very time limited in the worksop with a backlog of personal projects. I'll comment back if things change. You could point him to 'the peanut' which can be had very cheap version 1 now on Aliexpress. Ive read mixed results on their pickups - but that would be a secondary on the main use you reference anyway (although could use with a headphone amp connected to smart phone for a bit of fun). Cheers
Fully subscribed! The guitar was first made piece by piece, then played, great video!
Thanks!
No puedo dejar de ver este tipo de trabajo mas cuando se trata de este tipo de instrumentos .me gusta bien logrado.te felicito.
Gracias
This is really cool and really nice looking. I enjoyed it quite a bit!
That was fascinating to watch. So many things could have gone wrong but didn't 😄🎶🎸
I really like it. Its great ukulele with a curved edge
Thanks!
I would love to have a go at making one of these, but I’ve only got an hammer and a piece of string..
Thatsca good start for a diddley bow!
Great work Mike. 👍😊
I looooove CircuitsAndStrings! Great build!
Love that it kinda looks like an oar considering they are synonymous with the Pacific islands people's. I'm curious what the coin is? A Hawaii quarter would be fitting.
It does! Coin is a 5c New Zealand cent (long out of service now) so absolutely the Pacific ties!
A TRAVEL UKULELE? Like, it is already the smallest instrument out there. If your ukulele takes up too much space, you should try playing upright bass or something for a while :P
Or... make an upright bass with an opening back to pack all your holiday gear in! that way you can still just carry on (quite big) thing :)
ruclips.net/video/2GVjcsHKKKc/видео.html - another option!
It is a matter of not only being smaller, but being able to handle abuse a bit more than a standard Ukulele. Because the body can be fragile in a suitcase.
Could almost defend yourself with this - its solid!
LOL I said exactly that to my Wife just after seeing this video =)
Ha, you should try a mini harmonica some time.
Not entirely sure why a normal uke isn't travel sized enough, but great build!
Thanks. It's smaller than a usual one still. Although quieter play the appeal for me so I don't wake anyone.
Sounds like a campfire instrument.
Sounds like a Ukulele
Nice! Cool build, I'll have to add this to my someday list.
I absolutely loved the part at 2:36, the noise kinda acted like a shaker for the music.
What size drill bits did you use and how wide and deep was the bridge base?
Hi. Drill bits to suit the tuners one uses. Some are 8mm. Whole unit about 18-19mm thick. “Sound hole” area approx 16mm deep. Bridge mounting slot approx 5mm.
@@MikeHawkey awesome!!! thank you! also where can i get the string turnaround?
andy rocksteady that one I made myself. I know one can get tattoo grips on eBay that work but a bit thinner spacing. Maybe some clever bolt and bearings or washers?
7:00 Logan you're my hero theme music
AG131 literally just about to say that😂zircon is famous bruh
Lol I was thinking that
99 percent sure its a stock uke track zircon found online
Thanks Bensound for the track! www.bensound.com/
Can't get it out of my head
if i only had tools..
GA Rey yard sales!
...
I live in a country where we don't have Yard sales or easy access to this tools (At least not for cheap) but I think this could be done with a CNC machine and then work a lot with a file and sandpaper. Check if you can find someone offering those types of services. Maybe even a laser cutting shop or a hackerspace.
Franco Falaschi thanks. I'll give it a try.
This could be done with really basic, old hand-tools. Straight and sharp lines and smooth corners may be harder without practice, but there are techniques for everything.
Power-tools and very specific tools simply make life easier.
I'd love to see videos of this plugged in and hear it. Cool uke/neat minimalist design
Mark Young if I make a plug for it some time, deal. Circuits and strings has a video of an electrified one!
Es posible colocarle una tapa desmontable? Se obtendría mayor sonoridad?
Saludos desde Buenos Aires, Argentina!
Sí, es posible. Echa un vistazo al canal Circuits and Strings. Creo que Daniel ha hecho uno similar con una tapa. Sin embargo, es una cavidad pequeña, por lo que el sonido seguirá siendo bajo. ¡Gracias!
What a great job! Very good! Congrats!
Thanks
I want one omg this would be so handy when I am on the road
Nice craftsmanship
Thanks!
I've watched this several times now and I love it! Great idea great execution but the only question I have is how close is the attenuation and could you make something to make it exact?
Do you mean intonation? - if so i generally use a fret scale calculator. They are pretty good, but things like string height (if too high) will put the tone out. On ukulele’s with a single bridge its always a minor weigh off vs say an electric with individually adjustable setups.
@@MikeHawkey lol yes 😆. You gave me an idea for a base guitar. Something I could build at my toolbox during down time at work. Plane and simple. Basically a practice instrument. Thanks much
@@mikeknowlden9617 nice. Good luck with build!
Yo Mike, this is an awesome build and I wish I could be able to build it myself based on this video, but to help me get the most detail that hammering piano tune gets in the way and also booms up on loud speakers or ear buds, so please consider just a few decibels down, thanks bro!!! :D
Thanks for the feedback. Don't forget your volume adjustment!
Old nz 5 cent coin is pretty cool addition
Este é o ukulele de viagem de madeira é o que você fez pra mim é isso aí Mike você manda muito bem nota 10
Obrigado
Hola me gustaria saber las medidas para fabricar uno igual??
This is so amazing. I wish I had the supplies to make my own
Thanks.
i'm not ragging on this build at all, totally cool, i just have to say this in the name of comedy.
"Travel Uke...when a regular uke is just too damn big to pack around with you." Billy mays here with another FANTASTIC product. Are you a bohemian Uke god but dont have the upper body strength to carry heavy gear and instruments up the mountain with you? well, good news, everyone, the new travel Uke is a full 3 inches shorter then a regular uke with only 103 percent of the normal weight. sure its quiet, but think of the extra space you'll have for your granola bars and a beanie now that you have replaced that ancient ol wood uke, with a slightly tinier instrument of the same material. only 3 easy payment of 19.95 plus shipping and handling, but call now cuz we cant do this all day and we will send you a SECOND unplayably tiny instrument. thats over .9 pounds of Hawaiian juju for only 19.95, but wait there's more. if you call in the next 10 minutes, you will also recieve the tiniest pick ever conceived, the tiniest backpack ever made, smaller hands, and girlfriend with armpit hair who hates gluten. thats over an 80 dollar value for just 4 easy payments of 19.95. spill some homemade organic honey on it? clean it up with the tiniest eyedropper of oxy-clean ever made at no extra charge.
Blah Blahsen sold! I'll take your entire stock! 😉
Pure genius!
Anyone know the name of the song at 7:00? :)
Nice use of the old 5c coin well done on the whole build from another kiwi:)
Thanks Chris. Have had some coins sitting around for some time looking for new experiences!
the tightened strings may dig into the wood over time
Could do, agreed. Its pretty hard wood and coated in cyanoacrylate at the bridge roller end. If it did wear through, there is a metal rod, so it would still serve its real purpose of a string spacer - wouldnt affect playability. Plenty of older instruments use wooden nuts and bridges and are still going after all these years, so I don't anticipate any early failure.
this one i see reverse stringing, but you did not play, like to hear the sound
Small bit of playing at the end, but not a great setup. Thanks!
Amazing !! I wish I had the tools to make one !! I Love your videos keep up the good work 💪
you have a new suscriber from Puerto Rico 🔥
Thanks. Nothing yet on the build table, but several plans in my head for future bits and pieces!
I hope i got one of these
beautiful. I really enjoyed this video.
I'd like to try this with metal strings
That will work fine but just watch out for intonation as I’ve found steel more sensitive at super short scales
@@MikeHawkey Right, thank you.
i play ukulele here and there and thought this would be a great little project for me because i’ll be taking my second year of engineering this year (i’m a sophomore) and most of these tools are in the school’s wood shop. do you think i could pull it off?
Its so cute and lovable, you really have a talent.
I'm curious as to how well this would function as an electric ukulele.
Hi, with a pickup would be pretty good - on par with the pure electric (non acoustic electric) ones.
Do you have to counter sink the holes for the pegs?
Nice work!! congrats!!
Wow..!!!! Wish i can have this uke...😍
Thanks :)
Love it!!!! What is the overall length, please?
Hi overall is 425mm.
@@MikeHawkey Thanks!!!
Hope all goes well if you build one!
this is beautiful
wooooah!! awesome built! i have to make this!
Lau Woodcrafts thanks and good luck with the build!
Lau Woodcrafts thanks and good luck with the build!
I can play cool tunes with that bro dont worry about the haters they are just jealous they dont know how to play great job big thumbs up of course 👍
Thanks!
Wow that was awesome
Such an amazing instrument thanks so much for the great vid.
Thank you!
do a guitalele like this one pls
Totally doable. Maybe in the future!
isaac ramire
I'm attempting,to make a few of these for my niece and nephews how far do you saw for depth for the frets?
I made a little wooden stop on my saw that was stuck on with double side tape. Stops the saw at the same depth fret legs are. Alternative is just take it super slow and measure, or go over and fill sides with sawdust and glue. Hope the build goes well.
Hermoso trabajo Amigo ! Yo estoy haciendo un bajo.Lo hare de 20 pulgadas.Saludos desde Buenos Aires / Argentina.
Buen proyecto de sonido. Buena suerte y gracias por el cumplido.
Make more and sell them. I'm interested in one.
Spare time is not on my side at the moment sadly, but I appreciate the interest!
Logan you are my here you mean the world to me
It sounds great, usually ukuleles sound like cats fighting but this is nice. But I don't understand, it has no body and no pickup, why can I hear it?
That's a very cool looking ukelele, makes me wanna make one and I can't even play it lol
Im not to far from you there. Minimal playing skills - more building skills! Thanks!
Now i want one!!!
excellent work!!!
Thanks!
Nice... Thanks for sharing. How is the instrument tuned? To what pitch.
Thanks. Tuned standard soprano uke gcea
Do you have a blueprint for the measurements? My 15 year old wants to have a go at making one for himself.
Hi, I don't for mine but if you search for circuits and strings RUclips or website he has printable version for his! Hope it goes well!
You have a big talent sir ! by the coin and the ‘Onehunga’ address on one of the boxes you're in NZ I'm guessing. Amazing work.
Andy Ballard good detail spots. Sure am!
Very Beautiful job!! Compliments!!
Thank you
im interested in making one of these so i can take it places and carry it in a book bag but i have little wood working experience let alone ukulele making experience, any tips?
HI. Have a look over at circuits and strings also for ideas. I think cutting the centre without a back plate would be easier. Frets can be tricky. You could just glue skewer ones on rather than use fret wire. That's worked fine on a few projects I made. Measure twice cut once and take your time. Good luck!
hello, im planning to build one myself with only hand tools. What is the thickness of this wood you used? thanks
Hi, my wood was about 20mm thick. If you are thinking about adding a pickup, might pay to make it slightly thicker as its fairly slim. Thanks and good luck!
Wanna knw what is the exact measurements ,can anyone tell me where i could get some info ??
joao abo-abo circuits and strings has original plans. I rescaled to soprano scale and adjusted but no longer have plans myself sorry.
Hey, really interested in making this little buddy for my journey to colombia in the summer. I really want to make on like you did and not one like circuitandstrings, got any sizes or plans? would be really awesome! thanks!
Hi, Sorry, in this instance no - The main real difference aside from scale length is the back plate in the 'sound hole' area. I just left some wood in. Also the bridge - mine is a wooden/metal part rather than Daniels modified angle piece. Good luck with your build!
What would you do to adapt the plans for a tenor size?
Hi, I'd start with a fret calculator like this: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwiJsquMkYDjAhWUfSsKHQDPBk0QFjAAegQIAhAB&url=https%3A%2F%2Fwww.stewmac.com%2FFretCalculator.html&usg=AOvVaw10KQDFFoSzonTXB-t9RA_i
then calculate the scale difference and adjust the design by that % (if you were working off a plan).