There is only one Bruce Logan, great to see the idea developing. We need a player at the Rolex event this week to adopt the Octogrip product. Get in there Mr. Logan..❤
Mr Duncan your a great sales support for Octogrip in the Middle East been helping my direction since the beginning. I am supporting a very good up and coming Pro on the Tartan Pro Tour called Hamish Mills. Plays out of Cardross. He will be coming to Abu Dhabi this winter. I will insure he looks you up. @hamishmills
So very grateful, I am getting on in years so this was to be my pension plan. I will work hard to take a small idea to reality. With the Golf world help. 😅🎉
I have 3 daughters and 7 grandchildren so creating a business to let my grandkids take to the next level would be my ultimate dream. My oldest grandson is now in sales. Plus my other grandson is a graduate engineer. Thanks so much for your comments.
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
@@petejones9842 yes I have left handed design. Both will be available. It’s a bit difficult to work out volume on Left hand golfers? Nevertheless I will insure we cover.
Great guy really hope he smashes it going forward …And I’m the same as you gaz, I’m a red through and through but I’ve always loved the sky blue as a colour 😅😂..I would have done the same as it looks mint 👌
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
Those grips seem like a great idea, putter grip has similar features to the one I use, so would probably be interested in the new octogon shaped one when released 👍 Though that wedge with the octo groves has me wanting one, what a great idea 🏌️
I will keep Gary posted the 1st plastic machine design is done. Now to make moulds then skins. I’m trying to keep the theme consistent with driver/iron grips.
Love it, next grip change I'm there, providing he comes further south with the football design's, or should I wait until temu pick up on this,.....nah only joking will buy British where ever possible, keep them coming mate.
I think the prototype octogan shape one is a great idea, can’t wait to see it released. Never thought about the shape of our hands, they do create an octagon.
Golfers and corporations should try this. I know Bruce is a keen golfer, his experience and knowledge of golf is reflected in the Octogrip range of merchandise. Golfers alike will be missing out if they don’t try this product.
I don’t look for them on his website after for the price, but I also couldn’t find them. You might have to email him on that one. He might jump in the comments actually.
Not for sale as yet (sorry) Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
Fabulous insight into design. What a wonderful enthusiastic gentleman. Great video as always Gary 👍
Who would have thought of an octogan shaped grip! I would have thought it was crazy until I saw the natural shape our hold creates.
What a genuinely great man Bruce is. A great product to bring to market.
Best of luck Bruce
What a lovely guy and let’s hope his products go from strength to strength
I really think his grips could go somewhere, and potentially the wedge face.
Thanks Tommie
What an absolute gent! Good luck Bruce!
Thanks Dan
There is only one Bruce Logan, great to see the idea developing. We need a player at the Rolex event this week to adopt the Octogrip product. Get in there Mr. Logan..❤
Mr Duncan your a great sales support for Octogrip in the Middle East been helping my direction since the beginning. I am supporting a very good up and coming Pro on the Tartan Pro Tour called Hamish Mills. Plays out of Cardross. He will be coming to Abu Dhabi this winter. I will insure he looks you up. @hamishmills
What an interesting story and looking at golf from different angles.
Well done Gaz for raising this to our attention, some great ideas from Bruce 👍
Thanks from Bruce at OG
What a top fella, Bruce you are a star, hope you become extremely successful! 😊
So very grateful, I am getting on in years so this was to be my pension plan. I will work hard to take a small idea to reality. With the Golf world help. 😅🎉
They definitely look interesting and great on you to let him come on the channel and promote his products
What nice man,hope he makes a million
Yeah, I really do hope he does well. Must take a lot of courage to put invest so much into an idea 👌🏼
I have 3 daughters and 7 grandchildren so creating a business to let my grandkids take to the next level would be my ultimate dream. My oldest grandson is now in sales. Plus my other grandson is a graduate engineer. Thanks so much for your comments.
What a great chap such good idea
Great to see an engineering entrepreneur bringing his skills to the golf market
I think the prototype octagon grip will be nice when that’s launched. Looking forwards to trying it 👌🏼
@@garymartingolfGary your channel will be the 1st see and trial and comment.
Gaz, them wedges look really good and would be nice review if you get the chance. Great job and great start up best of luck
Yeah, can’t wait to try them 👌🏼👌🏼
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
Great job
Brilliant stuff, Bruce! The very best of luck and I too am interested in the wedges, in particular. 👍👍
I think this guy is really on to something here with those grips. Great idea and the best of luck with it.
I’d like to see a review with those wedges.
Yeah, looking forward to getting a wedge to test. I’d love to see some data and spin reaction on the green.
@@garymartingolf yes me too. I wonder if he caters for a lefty?
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
@@petejones9842 yes I have left handed design. Both will be available. It’s a bit difficult to work out volume on Left hand golfers? Nevertheless I will insure we cover.
The dimples look great. I love a Scottish accent. 👍
Story’s from Scottish people crab me, they’ve for a great accent 😅
What a man,my best friend is eighty soon a Liverpool supporter I will be in touch. To make a purchase.
That would be a nice gift 🎁
I hope to develop the branding for the Liverpool it took a year to get Rangers.
Great guy really hope he smashes it going forward …And I’m the same as you gaz, I’m a red through and through but I’ve always loved the sky blue as a colour 😅😂..I would have done the same as it looks mint 👌
Ahaha, it’s not often I buy something sky blue, but it just looked good 😅 cheers
Great video Gary and getting in first, result. Look forward to the grip and spin wedge review. 👍
Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
Great products, best of luck Bruce.
Those grips seem like a great idea, putter grip has similar features to the one I use, so would probably be interested in the new octogon shaped one when released 👍
Though that wedge with the octo groves has me wanting one, what a great idea 🏌️
I never thought about the shape around hands naturally make when we hold a putter. I think that shaped grip will be great! 👌🏼
I will keep Gary posted the 1st plastic machine design is done. Now to make moulds then skins. I’m trying to keep the theme consistent with driver/iron grips.
Love those grips
Need to get a motherwell one going Bruce
Whenever I seen the Motherwell comment I knew it was you mate!
@@gordonfalconer9176 ha ha how are you mate
Love it, next grip change I'm there, providing he comes further south with the football design's, or should I wait until temu pick up on this,.....nah only joking will buy British where ever possible, keep them coming mate.
Hahah lmao 🤣 how south? Arsenal ?
Not quite, although they took our Captain, happy Hammer ⚒️
Intriguing bit of kit that grip is
I think the prototype octogan shape one is a great idea, can’t wait to see it released. Never thought about the shape of our hands, they do create an octagon.
Driver /iron grip is totally unique and just got through the “conforms to the rules of golf” 🎉
Golfers and corporations should try this. I know Bruce is a keen golfer, his experience and knowledge of golf is reflected in the Octogrip range of merchandise.
Golfers alike will be missing out if they don’t try this product.
Interesting video. It would be good to see a review of the putter grip and maybe the iron grip.
What are those wedges called? Can’t find them on his Octogrip Golf website? Link?
I don’t look for them on his website after for the price, but I also couldn’t find them. You might have to email him on that one. He might jump in the comments actually.
Not for sale as yet (sorry) Yes though I would take the wedge with us to the show as the IP design had just been accepted in May. It’s that new. Very proud to have had the vision to bring a further twist to the game. Where Titelist, Callaway, Taylormade, Cleveland Wedges, and Cobra all have special spin milled faces to add to add reactions to ball spin. I was luck to use a trackman to measure the spin reaction. Positive results. I will get this product finished this year in 52, 56 as shown at the show and 60 degrees standard bounce before adding all the grinds! After Gary’s review it’s only fair I allow him to put the wedges through the various tests.
cant believe youv,e never see the ping fetch putter, for picking the ball out of the hole, what rock have you been hiding under,
Gary can I get my hands on one. I would love to do a review on my channel for him. Seems like a genuine man.
I’m sure he’d send you one. His websites in the description. Drop him an email 📧
When will the iron grips be released
The irons grips are already released and available. Theres a link to octogrip in the video description. Thanks
We need a translator for this one, Gaz. 😂
If you can understand me, you can understand anyone lol 😂
Love it 😂
Bruce has some nice products, very interesting.
But be very careful with your designs, TaylorMade may burrow/steal them. 😂
Or Kirkland 😃😅
They can license from me no problem although they have a milled design of their own. Close to the Titelist. Nobody is safe.
Ping Fetch putter
Scottish engineers - never invented fuck all right 😂 possibly the next innovation to change the world - good luck Bruce - R Marsh BEng CEng MIET