Thanks for the front view, the cab looks just as incredible as the rest of the model! My jaw literally dropped as the tailgate opened, such accuracy! Even the wear markings on the inside of the body are spot on. Everything about this truck is amazing, no doubt the greatest garbage truck model ever.
Thanks for the nice comment! Well, hopefully someone else creates something similar. And I am definately going to make more! I see that you are into the hobby as well, du you have any refuse truck related plans? =)
Masterpiece, really professional build. Looks a lot like the Norba Ki 11 which we had in my town 20 years ago. Think about me when you want to sell it, which you probably never will do. Mind the fingers with this big boys toy!!
Hi! Thanks a lot for the comment. Yes, I have built it from scratch (except from the cab which is "only" shortened). I don't think I will recommend anyone to build this truck, it is very time consuming, and requires a lot of manual labour. maybe in the future if I create a more simple model. I recommend you to read about cad-software, water/laser cutting and soon you will be able to build something like this yourself. :-) Would love to see a video of your revopack by the way! :-)
Are the packer and hopper custom made? I just made one of these two days ago and I did it in about 5 to 6 hours. It started out as a 3 foot by 3 foot sheet of aluminum. I marked all of the folds , and took a chisel and rocked it back and forth on the line putting some decent pressure on the chisel , then after I folded the left side I "chiseled" the other 4 lines and folded them into a box. Then I took my tin snips and cut back 4 inches on the part that I wanted to be the front so that I could fold the end closed , but that didn't work as planned, after I cut it ,I went to fold it and I did but that failed very badly. I put gorilla tape there for now to hold it together but I will do something to hold it together permanently later on . I had about 5 inches of extra metal that I folded to hold the side to the top and I just drilled two holes in the side where the top connects to the side and put a bolt and nut in each one to hold it but I'm going to find a better way that's less "ugly" . And for now my packer is just made out of a cardboard box that was cut into two walls , a top , and a hopper. The packer as you've probably already guessed is made out of cardboard. For now . I want to make a hydraulic or electric one in a few days from now or until I get the parts. I still need a cab and chassis so I can make the bottom of the packer ( or hopper ) part lower than the bottom of the trucks body/ holding compartment. Videos will come as soon as I get a new video camera so look for them on my channel as well as go pro trash and recycle collections with a head-cam and also look for first gear trash truck videos. And if you could, could you get a manual of how you built the hopper and packer?if not it's ok I get that it takes a lot of manual labor to do these kinds of things ,but if you can ,great! But if not could you make a parts list for the hopper and packer? Thanks!!!
Thank you! =) Conscideering the amount of time and money it takes to build a model like this, I can honestly say that I will probably never make models to sell. I don't think that anyone would want to pay a fair price. The only way to make it cost-effective is to do it yourself. :-(
Thanks for the comment! Well, the advantage of proportional hydraulic functions is that you can make the movements very realistic if you want to. =) The wear markings took a lot of time to make, so glad that they were convincing! And thank yo very much!
this is a fantastic model Norba RL-35 i also like the ejector barrier design for a clean discharge .can you do a video of the blade crushing match sticks bits of wood
Thank you very much! It is not surprising that it reminds of the Ki11, since they share an almost identical tailgate. Haha, I will sure mind my fingers, since I think it would hurt a lot to get them caught in this packer! =)
I must say your models are really great do you build them from scratch? I have made a revopak out of wood with working ram but not with hydrolics. Now i am looking into making one out of aluminium and with hydrolics but it mite be a big mission. If i paid you would you make up a manual for me pls. Then i would beable to do the rest. What would your price be. Pls pls pls.
Wijnmuseum about 30kg in the downward motion, and 22kg during it's upward packing motion. Weakest moment is as the blade starts to swing inwards, where only 7kg of force is available.
Sorry! :-( I could put together a manual of the parts that you need, like electronics and hydraulics. I could also add the types of aluminium/steel sheets/profiles and screws that I have used, along with the manufacturing methods. But to make a manual including every step would be veeery time consuming, as I did a lot of this manually. So no promises.
can i have the truck pls when i have this truck i go to the playground and i go find sticks and put in that crusher and it crush the stick pls i want that truck
can i have the truck pls when i have this truck i go to the playground and i go find sticks and put in that crusher and it crush the stick pls i want that truck
Thanks for the front view, the cab looks just as incredible as the rest of the model! My jaw literally dropped as the tailgate opened, such accuracy! Even the wear markings on the inside of the body are spot on. Everything about this truck is amazing, no doubt the greatest garbage truck model ever.
This totally awesome. We need more RC's like this one. Great video. Thank you for sharing
Thanks for the nice comment! Well, hopefully someone else creates something similar. And I am definately going to make more!
I see that you are into the hobby as well, du you have any refuse truck related plans? =)
@@SeRefuseTrucks your welcome. It's a great truck
Very good. Thanks for sharing.
Thanks for the kind comment!
Masterpiece, really professional build.
Looks a lot like the Norba Ki 11 which we had in my town 20 years ago.
Think about me when you want to sell it, which you probably never will do.
Mind the fingers with this big boys toy!!
That is so awesome. I would to play with it.i used to be a garbage man
Hi! Thanks a lot for the comment. Yes, I have built it from scratch (except from the cab which is "only" shortened). I don't think I will recommend anyone to build this truck, it is very time consuming, and requires a lot of manual labour. maybe in the future if I create a more simple model. I recommend you to read about cad-software, water/laser cutting and soon you will be able to build something like this yourself. :-) Would love to see a video of your revopack by the way! :-)
Are the packer and hopper custom made? I just made one of these two days ago and I did it in about 5 to 6 hours. It started out as a
3 foot by 3 foot sheet of aluminum. I marked all of the folds , and took a chisel and rocked it back and forth on the line putting some decent pressure on the chisel , then after I folded the left side I "chiseled" the other 4 lines and folded them into a box. Then I took my tin snips and cut back 4 inches on the part that I wanted to be the front so that I could fold the end closed , but that didn't work as planned, after I cut it ,I went to fold it and I did but that failed very badly. I put gorilla tape there for now to hold it together but I will do something to hold it together permanently later on . I had about 5 inches of extra metal that I folded to hold the side to the top and I just drilled two holes in the side where the top connects to the side and put a bolt and nut in each one to hold it but I'm going to find a better way that's less "ugly" . And for now my packer is just made out of a cardboard box that was cut into two walls , a top , and a hopper. The packer as you've probably already guessed is made out of cardboard. For now . I want to make a hydraulic or electric one in a few days from now or until I get the parts. I still need a cab and chassis so I can make the bottom of the packer ( or hopper ) part lower than the bottom of the trucks body/ holding compartment. Videos will come as soon as I get a new video camera so look for them on my channel as well as go pro trash and recycle collections with a head-cam and also look for first gear trash truck videos. And if you could, could you get a manual of how you built the hopper and packer?if not it's ok I get that it takes a lot of manual labor to do these kinds of things ,but if you can ,great! But if not could you make a parts list for the hopper and packer? Thanks!!!
Very cool love to have that truck.
Fantastic this Volvo. Very good Job. I
grea!!!! Very good job
dude you could make your own RC brand and sell this and make big bank bro
Unfortunately I doubt that. I don't think the market is big enough.
Thank you! =)
Conscideering the amount of time and money it takes to build a model like this, I can honestly say that I will probably never make models to sell. I don't think that anyone would want to pay a fair price. The only way to make it cost-effective is to do it yourself. :-(
Thanks for the comment! Well, the advantage of proportional hydraulic functions is that you can make the movements very realistic if you want to. =) The wear markings took a lot of time to make, so glad that they were convincing! And thank yo very much!
Ok.. that is awesome.
+Jill Reasoner Thanks! =)
DAMN you should sell by order of fans that want to buy them
this is a fantastic model Norba RL-35 i also like the ejector barrier design for a clean discharge .can you do a video of the blade crushing match sticks bits of wood
super awesome !
+InevitableCrafts Lab Thanks! =)
who here remembers there goes a garbage truck from when we were kids?
Cool is the thing in the back sharp
Thanks! =)
This is a business opportunity
nice
Awesome video!!! Where can I buy one!!!!
did you make it if so its so cool
Yes I did, thanks!
Thank you! I can definately make such a video, stay tuned for updates! :-)
Thanks a lot! =)
Thank you very much! It is not surprising that it reminds of the Ki11, since they share an almost identical tailgate. Haha, I will sure mind my fingers, since I think it would hurt a lot to get them caught in this packer! =)
I want one!!
+David Jauregui Just get busy building then! =)
Xem cứt
Where'd you get this?
Sorry Where you by this truck?
Were can i also get one
Episode of the Sopranos here?
LOL yes, but less messy!
🔝
I must say your models are really great do you build them from scratch? I have made a revopak out of wood with working ram but not with hydrolics. Now i am looking into making one out of aluminium and with hydrolics but it mite be a big mission. If i paid you would you make up a manual for me pls. Then i would beable to do the rest. What would your price be. Pls pls pls.
Que lindo
How did you get it were did you bet it
where can i buy this truck? how must dit it kost?
Where you buy the cilider hydraulics?
+Yuri Fontes
Hi, From Leimbach Modellbau.
+SeRefuseTrucks thanks so much! I'm brazilian and i like trucks. Congratulations your truck is very good!
Yuri Fontes l
How much pressure power has the packer?
Wijnmuseum about 30kg in the downward motion, and 22kg during it's upward packing motion. Weakest moment is as the blade starts to swing inwards, where only 7kg of force is available.
30 kg downward...don't stick your fingers in :-)
It is homemade, and therefore can't be bought.
If you had set a price i would buy it.. :O even it was 2000USD..
Do you make these to sell??
Where can someone get one of these?
what is the name of this truck
Obviously fake, that's a real garbage truck and he made a super big model kitchen.
Dammit, you got me! :)
+SeRefuseTrucks so its fake
+House of Vacuums Yeah, I built a 35 meter high kitchen, and put a real garbage truck in it to make this video.
its cool man i like it
Sorry! :-( I could put together a manual of the parts that you need, like electronics and hydraulics. I could also add the types of aluminium/steel sheets/profiles and screws that I have used, along with the manufacturing methods. But to make a manual including every step would be veeery time consuming, as I did a lot of this manually. So no promises.
gostei
Do YOU sell any of those?
Hi! Sorry, but no. :-(
Can u make me one homemade? How much?
where can i get one!!!!!!!!!!!!!!!
Soy de Argentina Bs.as. dónde puedo conseguir un camión así para mí hijo??😭😭😭
nice how much for one
Homemade, and not for sale. Sorry.
A bueno gracias el que me lo a ya mandado
could you make instructions
+SeRefuseTrucks um es zu kaufen?
Es ist ein selbstbau, und kann leider nicht gekauft werden.
How muck for you to make me one
Está original
HOLA AMIGO BUEN DIA NO NO TENGO DE PANTALLA Y TECLADO...
05/09/2015 11:20
can i have the truck pls when i have this truck i go to the playground and i go find sticks and put in that crusher and it crush the stick pls i want that truck
i wand 1 plz
WARRIOR GAMING Maybe search amazon or ebay.
😨
😧😩
Oi
諭？かしか
Thanks! =)
gostei
can i have the truck pls when i have this truck i go to the playground and i go find sticks and put in that crusher and it crush the stick pls i want that truck
Sorry, but it is not for sale.. :(
😧😩