Thank you. Been trying several times. Still skipping stitches. I'm going to try this tomorrow. Had to walk away, then found your video. I do contract embroidery from home, down 2 machines - only have 2 to work with now. Will be glad to get back to 4 heads. Amazing, i had 19 heads, a large building, and employees... was losing money. Now finally making money, but very slow with only 2 machines working. Want to get back to work. Thank you so much!
nice video. I have a stupit question. What is the clamp with 2 pins moving foward? its about 8 cm heigh, with the axis in the lower point. Does it moves towards the needle to ensure the cutting thread operation? Thanks
thanks LeoWiish, I need to make more content for sure. after 30 years in the service industry I now need to work towards staying close to home. Thanks for being here!
Need you advice on this if possible, In multi head, One head is not cutting the thread even after changing the knife and stuff, rest 5 are working perfect, Any help will be appreciated, Thank you.
I have 8 head Machine it's occurs more problems like Needle broken issues in specific model and we using a cotton thread for that model so please help to its possible in cotton thread to run the machine are else need to change a thread
I noticed that the third screw. The one at your timing mark was never tightened more than "just hits the shaft" Does this one need to be tightened more or is that really all it needs?
Good point Amy. I didn't realize I forgot to return to that screw. No is the answer. The final step would be to go back to that screw and tighten really good.
That is what I thought. Great video! I was able to time the third head on my Tajima TMFX-C1204-S this morning. And I made some step by step instructions. I also noticed my manual said the timing mark is 201 (+/- 3) so 200 was a nice middle ground. Another trick to getting the correct distance was turning my needle backwards then having the rotary hook "Touching" the needle. When I turned it back correctly with the scarf in the back the distance seemed just right.
buona sera ragazzi ho un problema con una tajima c1501 prima mi faceva un rumore poi lo spenta e lo riaccesa e mi esce il software e mi rimane bloccata con M:V0.5 E NON SI MUOVE nesun tasto cosa fare grazie
Hamare Paas Ek Chinese machine Hai Jisme se Daga katne par rukti nahi aur nahi uska Jhansi light kaam karti hai toastmaster card kharab hai ya hit card kharab hai
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Thank you , This vid got my tajima tmbp-s1501c back up and running!
Thank you for this excellent video! This was exactly what I needed to fix my issue and get our machine back up and running!
You're so welcome! Glad the video helped
What was your machine doing?
Cam timing video plz
Thank you. Been trying several times. Still skipping stitches. I'm going to try this tomorrow. Had to walk away, then found your video. I do contract embroidery from home, down 2 machines - only have 2 to work with now. Will be glad to get back to 4 heads.
Amazing, i had 19 heads, a large building, and employees... was losing money. Now finally making money, but very slow with only 2 machines working. Want to get back to work.
Thank you so much!
You are so very welcome Deanna. Check us out at Fixyourstitch LLC on facebook. More videos to come once I find the time. Glad you're making money.
nice video. I have a stupit question. What is the clamp with 2 pins moving foward? its about 8 cm heigh, with the axis in the lower point. Does it moves towards the needle to ensure the cutting thread operation? Thanks
I pay my engineer an arm and leg for this bro😢
Keep it up💫
thanks LeoWiish, I need to make more content for sure. after 30 years in the service industry I now need to work towards staying close to home. Thanks for being here!
Thank you! This was a God send
I'm going to expand on my RUclips site to bring additional videos on hook timing and so much more. Thanks for watching! Stay tuned!!
Do you do saill embroidery machine
Need you advice on this if possible,
In multi head, One head is not cutting the thread even after changing the knife and stuff, rest 5 are working perfect,
Any help will be appreciated,
Thank you.
is this going to fix a tajima tfmx-c1501 that is not moving the hook when is stitching the logo?
sudah tau
I have 8 head Machine it's occurs more problems like Needle broken issues in specific model and we using a cotton thread for that model so please help to its possible in cotton thread to run the machine are else need to change a thread
Which machine brand and model do you have please?
No need to change threads. The timing and needle depths can be reset. Better if I knew what machine we're talking about?
Cam timing video
I noticed that the third screw. The one at your timing mark was never tightened more than "just hits the shaft" Does this one need to be tightened more or is that really all it needs?
Good point Amy. I didn't realize I forgot to return to that screw. No is the answer. The final step would be to go back to that screw and tighten really good.
That is what I thought. Great video! I was able to time the third head on my Tajima TMFX-C1204-S this morning. And I made some step by step instructions. I also noticed my manual said the timing mark is 201 (+/- 3) so 200 was a nice middle ground. Another trick to getting the correct distance was turning my needle backwards then having the rotary hook "Touching" the needle. When I turned it back correctly with the scarf in the back the distance seemed just right.
@@amypleticha7993 After using that needle turned backward for gap, check gap on several others. Not all things are created equal ;)
I have a problem in my machine can you halp me please
Thanks JIM!!!
I have a question where is the degree wheel
I have a big problem, can i contact with you
email me at jamesauclair@gmail.com Give me an idea of what's going on with your machine. Also, where are you located?
Please help me make video on how to adjust take up lever drive cam swf sb 18head thanks
ruclips.net/video/K7hPrRBDwwQ/видео.html
maybe this will help. Adjusts the take up levers
I would like a video on timing the head shaft.
Hi Edward, Are you talking about Synchronizing the heads?
24 HAED KI CAM EK Sat PLZ
Please help me sir how to control Needle broken of Aura embroidery machine
I've never worked on an Aura. Have you checked the timing?
buona sera ragazzi ho un problema con una tajima c1501 prima mi faceva un rumore poi lo spenta e lo riaccesa e mi esce il software e mi rimane bloccata con M:V0.5 E NON SI MUOVE nesun tasto cosa fare grazie
Pls help us my single head embroidery machine make problem in in desingne and all so senter out problem
Pls reply us as soon as posible
Assalamualaikum
I'm having same problem can you help me too.
Hamare Paas Ek Chinese machine Hai Jisme se Daga katne par rukti nahi aur nahi uska Jhansi light kaam karti hai toastmaster card kharab hai ya hit card kharab hai
your video i's not clear,,
Thank you