Idk what uag is thinking with this price. Nobody asked for different materials from their cases. All we wanted were stronger magnets and an action button button 😂
That’s a fact. Don’t do too much from what we need. All I wanted was the action button, strong MagSafe and firmer sides, that’s it. G10 material is cool but it’s pieced out of everyone hands.
UAG used to be my go to case. But seeing how the quality had dropped when i got one for my Note 8, i went to another brand for my new phones. That and the ever increasing prices of their new cases. Definitely not worth that much
Yeah they have made some changes and they would have a good case if they didn’t change the quality of it. This case is headed back in the right direction but still not worth $150.
i had one of these cases and i hate cases with air slits near the power button. The case got dirt in between and scratched the side of my 15 pro max i instantly returned.
I am rockin the UAG Monarch Pro Kevlar on my S23 Ultra. I can say that this case has been protecting my device hella good. Worth the price to be honest
The G-10 material is basically a fibreglass sandwich of tough protective goodness for your phone. If they use a similar process like I do when making large sheets of G-10 material. For my custom boat orders of canoes and kayaks. Then they probably have a large industrial scale temperature controlled vacuum chamber, that they use for making this material and also making stabilized wood. I have to say that I already own the limited edition version of this case that came before this release that was made of forged carbon fibre. That version of this case has done well protecting my phone so far, going on 2 months. MagSafe works just fine for charging and for all the other accessories that use MagSafe. I had to mention this because I noted that most complaints about the case before this new limited edition version case were concerning the fact that MagSafe was either not working g with charging in mind or it was barely working. I can understand being upset about such an issue when paying such a high amount for a case. So I am betting that this issue will carry over to this G-10 version of the case. I am also betting that the one issue I have with the forged carbon fibre version will be present in some of these G-10s. That issue is with the different material that is in the sunken in area around the MagSafe area of the case. The aforementioned material looks like a black leather. Well it is constantly peeling up and off of the case. Eventually I can see myself just ripping g this material completely off the case. In all honestly if the forged carbon material in the case I have now, or if the design of the new G-10 case just continues on underneath that leather sticker type material then the case will look much better arguably with this material ripped off completely. I would like to add more but I am hungry and wife just got the supper finished. Cheers all!!!
Supcase started copying UAG but now the UBMag XT is actually better and less than 1/4 the price. Better protection, better handling, slimer and I would argue nicer. 150 bucks and does not even have isolated buttons?, that's just unacceptable.
In Amazon the forged carbon one it’s cheaper and it’s the same, imma gonna go to take the forged one. Both of them resist 7.6m drop And I think that the forged one looks better Sorry for my bad English, it’s not my native language
Bought this for my 15 pro and tbh this case is legit as hell. Expensive but if money is not an issue this is a very very good case. Only thing I would change is put solid buttons in it.
I have a UAG Monarch Pro case and the official magsafe charger doesn't work on it at all and the wireless charging works intermittently. Would not recommend.
I have the uag forged carbon Their first limited edition case before the G10 Its 60g feels premium And if price is not an issue Its nice Kudos love this channel
Absolutely. If price isn’t an issue when you are still getting a great case. It’s some small things I would like changed for the price but it’s not too bad. I still really like the case.
Very unbiased and truthful review of the monarch G10. It's definitely overpriced and just makes little sense to get it. It looks good though but compared to the older monarch series aka iPhone 13 series, they do make better cases back then and it's priced much more down to earth.
It might be less premium than carbon fiber but g10 is amazing on knifes, all the high end makers use it , my favorite knife has g10 scales on it, and it’s a 400 dollar knife
@@gtiguy1992able it’s different when it’s a custom piece, or small batch maker. They do different things to the G10 to make ir feel more premium, G10 that is bought for the masses and put on budget end knives is just non comparable
Wait a minute… they are priced for 150$?!? Nah… Also they have forged carbon version Also all other models have no dedicated action button, and that is for more than 55$…. No wonder I never chose UAG this year for 15 pro max (I used monarch/pathfinder on EVERY past generation iPhones since iphone 6s)
Do I like them no, are they terrible and too loose, no. I still prefer the more stiff sides that they had before. If I had to use this case as my daily with how it is right now I could easily do it.
Idk what uag is thinking with this price. Nobody asked for different materials from their cases. All we wanted were stronger magnets and an action button button 😂
That’s a fact. Don’t do too much from what we need. All I wanted was the action button, strong MagSafe and firmer sides, that’s it. G10 material is cool but it’s pieced out of everyone hands.
Thanks for sharing. Blessings on your day.
Hey Tee, what is the background on your phone? It’s 🔥
Can I ask what your wallpaper is dude? Love it any chance for a link? Love the vids keep it up my friend 👍🏻😜
What case you would recommend for the iPhone 15 that I recently purchased? Awesome content 🔥
Tee do we know if this versions comes with s24u ???
UAG used to be my go to case. But seeing how the quality had dropped when i got one for my Note 8, i went to another brand for my new phones. That and the ever increasing prices of their new cases. Definitely not worth that much
Yeah they have made some changes and they would have a good case if they didn’t change the quality of it. This case is headed back in the right direction but still not worth $150.
Case looks good, but when u mentioned the price… I was like, “oh hell nah”😂😂
🤣🤣🤣
I have the Forged carbon black and let me tell you something? It’s a little expensive but it’s worth the $150 I recommend it to you,
i had one of these cases and i hate cases with air slits near the power button. The case got dirt in between and scratched the side of my 15 pro max i instantly returned.
Agree 100%! This case is excellent! But that price is wild.
Yeah man it has to come down some.
Bro what is your wallpaper, that is clean
Lmao “little excited let me slow down”😂😂😂
Had to catch myself lol
@@TechnicallyTee fumblin spittin facts lol aye Jack my boy got a studio.. definitely learn anytime I can catch up on a video big ups
I am rockin the UAG Monarch Pro Kevlar on my S23 Ultra. I can say that this case has been protecting my device hella good. Worth the price to be honest
The G-10 material is basically a fibreglass sandwich of tough protective goodness for your phone. If they use a similar process like I do when making large sheets of G-10 material. For my custom boat orders of canoes and kayaks. Then they probably have a large industrial scale temperature controlled vacuum chamber, that they use for making this material and also making stabilized wood. I have to say that I already own the limited edition version of this case that came before this release that was made of forged carbon fibre. That version of this case has done well protecting my phone so far, going on 2 months. MagSafe works just fine for charging and for all the other accessories that use MagSafe. I had to mention this because I noted that most complaints about the case before this new limited edition version case were concerning the fact that MagSafe was either not working g with charging in mind or it was barely working. I can understand being upset about such an issue when paying such a high amount for a case. So I am betting that this issue will carry over to this G-10 version of the case. I am also betting that the one issue I have with the forged carbon fibre version will be present in some of these G-10s. That issue is with the different material that is in the sunken in area around the MagSafe area of the case. The aforementioned material looks like a black leather. Well it is constantly peeling up and off of the case. Eventually I can see myself just ripping g this material completely off the case. In all honestly if the forged carbon material in the case I have now, or if the design of the new G-10 case just continues on underneath that leather sticker type material then the case will look much better arguably with this material ripped off completely. I would like to add more but I am hungry and wife just got the supper finished. Cheers all!!!
Supcase started copying UAG but now the UBMag XT is actually better and less than 1/4 the price. Better protection, better handling, slimer and I would argue nicer. 150 bucks and does not even have isolated buttons?, that's just unacceptable.
Yeah Supcase is doing some nice things at a very affordable price point.
Love the FPT T-Shirt 🚽🧻
Nice video
Is it comparable to the forged carbon?
In Amazon the forged carbon one it’s cheaper and it’s the same, imma gonna go to take the forged one. Both of them resist 7.6m drop
And I think that the forged one looks better
Sorry for my bad English, it’s not my native language
And in their site both of them are at 149.95 dls
I saw they have a redesigned Civilian Case. Hope a review is coming on that one
I did a review on the civilian with the action button, is there another? I’ll have to take a look on their website.
@@TechnicallyTee yeah they changed the design a little bit. Only comes in one color from what I saw
@theWynn3 about to go and check it out.
Bought this for my 15 pro and tbh this case is legit as hell. Expensive but if money is not an issue this is a very very good case. Only thing I would change is put solid buttons in it.
I have a UAG Monarch Pro case and the official magsafe charger doesn't work on it at all and the wireless charging works intermittently. Would not recommend.
I have the uag forged carbon
Their first limited edition case before the G10
Its 60g feels premium
And if price is not an issue
Its nice
Kudos love this channel
Absolutely. If price isn’t an issue when you are still getting a great case. It’s some small things I would like changed for the price but it’s not too bad. I still really like the case.
We need that wallpaper Tee🤔
I’m going to find a way tonight to link it.
@@TechnicallyTee a true man of the people
150??? What are they smoking lol UAG = ultra avarice greedy
Yeah they out of pocket with that price.
DAMN!!! that look like!!!!🔥😍
It’s a dope look for sure but that price point it hittin hittin 🤣🤣
I’ll wait for the iPhone 16 hoping they lower the price on this case then.
Very unbiased and truthful review of the monarch G10. It's definitely overpriced and just makes little sense to get it. It looks good though but compared to the older monarch series aka iPhone 13 series, they do make better cases back then and it's priced much more down to earth.
Bingo.
G10 is a material that’s on knife handles on knives that cost $20. It’s not a premium material. You just don’t see it on phone cases. It’s cheap AF
It’s also nothing like CF. It’s a cheap alternative to carbon fiber
Yeah and I meant to say that in the video. If that’s the case then it’s really no point as to why this case has to be $150.
It might be less premium than carbon fiber but g10 is amazing on knifes, all the high end makers use it , my favorite knife has g10 scales on it, and it’s a 400 dollar knife
@@gtiguy1992able it’s different when it’s a custom piece, or small batch maker. They do different things to the G10 to make ir feel more premium, G10 that is bought for the masses and put on budget end knives is just non comparable
That case looks great
It does indeed.
I just got the forged carbon so I'm trying not to say yes to this 😅😂
Hahahaha it’s always good to have options.
@@TechnicallyTee I have a Caudabe Sheath otw and plenty of other options sitting in a box 😂😂
So that G10 material is literally made for things that you are never supposed to drop... Well perfect for a phone case isnt it
UAG has never really been my style either way but $150 is straight outrageous. $60 absolute max.
Sorry T, love your vids but you lost me at $150 🤣
I lost everyone lol.
Wait a minute… they are priced for 150$?!? Nah…
Also they have forged carbon version
Also all other models have no dedicated action button, and that is for more than 55$….
No wonder I never chose UAG this year for 15 pro max (I used monarch/pathfinder on EVERY past generation iPhones since iphone 6s)
Hahahahahahahaha $150 for a phone case. Can’t even blame inflation for that boneheaded price. Sheesh.
No case should ever be more than $75.
I agree.
Not even 80 for such a flimsy case. There are more than enough cases on the market with better prices and much better fit on the phone.
Yeah $80 is also pushing it. It’s not that flimsy honestly but I would want it more firm for sure.
Slit buttons, floppy sides, 70 grams, $150. Nope.
I’m with you. Would I go out there and buy it for $150, no way but it’s a good case.
Too bulky. Bought a Smartish Gripmunk and never take it off.
Good option right there with a great price point.
150 😂
🤣🤣🤣
Neat…but way overpriced. This should be 60-70 bucks tops.
Awesome 🎉😂
Yooooo 💪🏽💪🏽💪🏽
Overpriced. I would never consider it.
Yup. Too high and idc what it’s made out of.
Don’t care what kind of protection it offers I’m not paying 150$ for a phone case 🤷🏻♂️
in earlier videos you were so dissatisfied with sides of the case being so loose, now you are saying passssible
Do I like them no, are they terrible and too loose, no. I still prefer the more stiff sides that they had before. If I had to use this case as my daily with how it is right now I could easily do it.
@@TechnicallyTee i love case that has stiff sides as spigen tough armor or defender xt . anyways this case is also great but not value for money
@@MegaSahil05 I think it’s been awhile now that he’s been sponsored. Don’t want those free cases/ad revenue to stop by dissing them too hard.
To expensive and to heavy
Bro you can’t make edc carry videos not know what’s G10 😂. G10 material mostly use on knife handle
O I know it’s ok knife handles. I have a few with it up there. But what G10 is composed of, I don’t need to know all that lol
I need 1 but $150.00
Bro you can’t make edc carry videos not know what’s G10 😂. G10 material mostly use on knife handle 🦾