This video was a life saver when working through my first flame wheel kit - the thing had liftoff this week and I would like to thank Marionville Multirotors for the step by step breakdown of the process
THANK YOU for a detailed video of how to solder the new escs. I have struggled with how i'm supposed to solder them for a while now, but now I finally know! :)
Very useful video with every step clearly explained. I am hoping to get back into constructing my own machine some 30-40 years after enjoying Airfix kits and balsa wood gliders, neither of which flew very well!! Hope to have some better luck with the newer technology. Well done. Keep up the Good work!
Excellent video. The pace and level of detail is excellent. I have watched a load of videos about building the flame wheel but will be placing my order with Marionville Multirotors as a direct result of watching this video.
I am very Thankful to you for these rich informations and efforts you have put it right here .. and looking forward for more in the future to learn from you .. my appreciations sir
The stickers with lines get put on the 2 ends of the carbon fiber rod to tighten the rod in the aluminum pieces to hold it in place glueing it means it brakes ing a crash the other way it can still come apart
Marionville Multirotors I don't even remember what I was asking you about 3 months ago. If you what to use RUclips to promote your business, I suggest you make your responses in a more timely manner. ??? :-/
This was implied in the comments but just to make sure - the IOC home and course system and DBUS are included with the DR16 receiver, as well as the return home when low voltage feature, correct? Also many thanks for the entire playlist of F450 videos, does a great job and explains everything thoroughly.
Yes if you are using DBus or SBus its all through the one connection (X2) but if you had a standard receiver you would use X1 channel for controlling the gimbal tilt. F2 port is for the gimbals connection. You dont need roll control.
Thank you for this video....very informative. I checked your web site out and didn't see the props listed anywhere as spares. I'm a massive prop breaker, and if I were to buy this kit I would want to buy at least 3 or 4 sets of spares. Thanks again!
I haven't listed them on my website yet but they are available from my ebay store. Listed as Phantom props. www.ebay.co.uk/sch/wolf-3-5-9/m.html?item=181442321671&hash=item2a3ece1d07&pt=UK_ToysGames_RadioControlled_JN&rt=nc&_trksid=p2047675.l2562
Why ESCs not on top of arms? It would look good (IMHO) and also allow you to mount all antennas under each arm - maximal distance apart. E.g. Spektrum receiver + satellite + telemetry box + potentially video transmitter. Visibility of antennas below the body is better, I assume?
Hi, thanks for the video, its very complete. Could you please explain why you placed the flight controller on the bottom plate? Is it a personal choice (less wires showing)? I always though that the battery should be on the bottom plate to lower the CG. Sorry, I'm a plane guy, sorry for my newbie questions.
hi, i bought this package last week and i cant thank you enough for the excellent service and very fast shipping, i have a question regarding the battery discharge rate, i bought a 3s 5000mAh with 35-70C discharge, can i use it with this build or not?
Have you made the second part of this video? I am starting the build of a F550 with Naza V2 and E300 propulsion system. Thank you for this nice video. Greetings from Mexico
It is not an issue to leave the bare ground wires from the ESC cable long. It is ground, it won't do anything if it touches anything. Just keep hot wwires from touching it. I don't like the way he put those cables, looks like it can cause undue stress on the solder joints. If it bothers you, you can heat shrink it after soldering and leave it longer, leave some strain relief in the cable
Willie Hill, Jr like he said, there is threadlock already on the screw. since this is a expensive kit. if u get kit from a cheap place then yes u have to put threadlock
Thank you for your clip. My ESC do not have coaxial but by black and white wires. Would white wire correspond to red wire in th older kits or the core of the coaxial cable in your clip? Thank you! Ivan
I'm relatively new to quadcopters (I've owned a small one for several months) and I want to.... step it up! A lot of people are saying this quad is a great way to get into aerial filming, and that it's preferable to the Phantom. I'm definitely not going with the Phantom, as it seems overpriced and I'm worried about potential fly aways. I've soldered before, but only a few times. How easy is this to build and will I be worrying about fly aways with this quad? Thanks!
I'm doing the same thing right now. My F450 kit will arrive in a week. Was thinking about getting phantom, but turns out at work I know some people who build drones, and the word is for less money you can get better machine if you build yourself. There's extra fun of building, it's much more customizable, you can go with highly programmable chip like Ardupilot, and you learn while you select components.
Hey ,i am working on f450 quadcopter with kk2.1.5 .i have assembeled it but its showz error like no i yaw input and when it goes shows no pitch input can you help me out please
Could you please list all the components used to build this drone as im located in Australia and you guys don't ship here o i have to source parts separately
Iv the f550 kit jus started building. was tempted to fold and strap the speed controller wires instead of trimming but thinking it could create some field interference when folded. For insulating the soldered contacts on can use clear nail polish or possibly just pvc glue dried over it.
+Marionville Multirotors i folded it in case i decide to upgrade to a heavy lift attachment so then arms would be longer. Btw my naza lite kit 3 volt supply unit is only one cable. What is the norm wiring to power both the controller and the reciever? Do I put it in the naza x3 and then how do i jump it to the radio recvr? Im using the fs9xr which has a power jack.
+Marionville Multirotors you can insulate with regular pvc glue and let it dry or clear nail polish...tho the latter may dry and crack eventually and should be inspected or reapplied. Can use a high peformance epoxy but with be a dog to remove if you want to unsolder later
Can somebody please explain what he is doing at 22:14 ? I'm really new to quad-copters and I'd assume its for a battery connector but where would someone buy the two wires and the connector? Or is it included with something?
Hi Marionville Multirotors, I have the same Kit and one thing that im strugling with is that i found the specificatin of the motor in internet and says that the current needed is Standard Current : 15-25A Max Current : 30A. But the current that the ESC provide is only 15A. it doesnt make sense to me because the ESC must supply at least 20% more amps than the maximum amps the motor will pull. Can you help me figure it out? Thanks for your time
Will I be able to use these parts for this model? Andoer walkera devo 7ch lcd screen radio system transmitter Andoer walkera RX701 receiver Battery connection XT60 Overlander li-poly 3S 30C 11.1 volt 200mah battery However I cannot seem to find a charger to work with the battery
Hello, excelent video. Just did all that, bt connected a DT7 via dbus, and when arming, two motors will start but the other two don't. When throttling they will start but quad shakes a lot. Any hints? Best regards
Hi firstly great video ! Do you have a similar one with the Naza V2 ? Also I currently have a Devo7 with 7" FPV monitor. Can you recommend a receiver and video transmitter that would be best for this kit and the F450 ? Cheers in advance
DJI don't supply a battery connector so you just choose the one that suits you. I would bin the bullet connector that HK supply and go with either deans or XT60.
hi This is a great video. I also want to build a quadrocopter like yours. What do I have to buy all. Could you please write me what kind of system and controller I need with the DJI F450 Frame kit. Thanks
Your best to buy one the the F450 combos with the flight controller. Either Naza Light or Naza V2. Then all you need is a 6 or 7ch radio and receiver, lipo and charger.
Hello, can you help me? I have recently purchased the f450 kit but I'm struggling on the battery side of things, could you recommend a battery and charger to me?
Any 3s or 4s lipo with between 3000-5000mah will be fine. I recommend the 3s 4200 or 5000mah for best flight times. marionvillemodels.com/rc-shop/lipo-batteries-multirotors-quads-dji-phantom-f450-f550-flamewheels.html. For charger a good quality AC/DC with at least 50watts. marionvillemodels.com/rc-shop/overlander-rc6-vsp-lipo-charger.html
I am just looking at this and the naza v2 on ur site ... I have a p2 already so I'm more looking for just an fpv quad now but it have to be at least over 20/22min of flight time on a good battery .....do you have any info on which battery gave you the better time . Best regards Aron
Excellent video build my DJI 450 along with your video, one question do I have to calibrate the esc E300 that comes with the kit? Newbie to this hobby,
Great Video!! Question- I dont have the LED module, so i dont have the 4 pin ( only the 3 pin ), so im assuming i just dont put anything in that 4 pin in the controller? correct? i mean besides the LED i use to pug in and and hook up a usb and use the assistance.. or do i just leave that hooked up?
did you have to solder to the frame the two power leads that come out the LED for the naza ? or does the naza get its power from one of the servo leads? cheers
Hello , I just upgrade my quad from CC3D to naza m lite with all toys, but I cannot comunicate my naza m lite with the assistant , no green lights or show in the COM ports at all,in win xp vista or win 10 pc's.what to do I will appreciate your help in this matter.
I saw that a gimbal could be used with the Naza lite and the DT7, can I stream video to my iPhone while the drone is in flight or would I have to use another screen if this is possible at all(I just want to see what I am recording when I record it). Sorry if this was answered before.
ok thanks for the response back, Let me ask you if you don't mind, If I use a Naza M Lite can I bind it to any radio or does it have to be a anything special?
Pretty awesome video, rare to see such a complete start to finish on youtube.
This video was a life saver when working through my first flame wheel kit - the thing had liftoff this week and I would like to thank Marionville Multirotors for the step by step breakdown of the process
THANK YOU for a detailed video of how to solder the new escs. I have struggled with how i'm supposed to solder them for a while now, but now I finally know! :)
Very useful video with every step clearly explained. I am hoping to get back into constructing my own machine some 30-40 years after enjoying
Airfix kits and balsa wood gliders, neither of which flew very well!! Hope to have some better luck with the newer technology. Well done. Keep up the
Good work!
One of the greatest drone that I ever used, strong frame easy to land, easy to fix, good layout from inside,
I can put 2s battery ?
7.2 propellers
This is a great detailed video of how to assemble your Flamewheel f450, excellent job sir!
Really clean built
Lionel Johnson thanks. Built so many of these back in the day.
Excellent video. The pace and level of detail is excellent. I have watched a load of videos about building the flame wheel but will be placing my order with Marionville Multirotors as a direct result of watching this video.
Thanks very much for your support.
Very helpful vid. Gives me more inspiration for a first timer build.
I am very Thankful to you for these rich informations and efforts you have put it right here .. and looking forward for more in the future to learn from you .. my appreciations sir
The stickers with lines get put on the 2 ends of the carbon fiber rod to tighten the rod in the aluminum pieces to hold it in place glueing it means it brakes ing a crash the other way it can still come apart
thanks for this most informative video I got me a CX-10 to practice and now its time to get with the big boys need something to use with go pro
On the ESC wires, you could ad RCA or BNC connectors for quick release and repairs.
I've done that once and used 4mm gold bullet connectors. To be honest I wouldn't bother and just hard solder.
Marionville Multirotors I don't even remember what I was asking you about 3 months ago. If you what to use RUclips to promote your business, I suggest you make your responses in a more timely manner. ??? :-/
Very good instruction video, I learned a lot from and will try to build one quad copter too, thanks
I know it is not nice to write in big letters. but.... VERY NICE VIDEO MAN !!!
Thank you for sharing.
Thanks, I've done a follow up with the Assistant software, look for DT7 in my channel.
Marionville Multirotors
Excellent video! Has really helped me to setup my F550. Thanks Man!
This was implied in the comments but just to make sure - the IOC home and course system and DBUS are included with the DR16 receiver, as well as the return home when low voltage feature, correct? Also many thanks for the entire playlist of F450 videos, does a great job and explains everything thoroughly.
Yes if you are using DBus or SBus its all through the one connection (X2) but if you had a standard receiver you would use X1 channel for controlling the gimbal tilt. F2 port is for the gimbals connection. You dont need roll control.
Awesome vid! Straight forward and very helpful to a beginner. Thank you!
Glad it helped you.
This is a very complete video of the assembly
Thank you for this video....very informative. I checked your web site out and didn't see the props listed anywhere as spares. I'm a massive prop breaker, and if I were to buy this kit I would want to buy at least 3 or 4 sets of spares. Thanks again!
I haven't listed them on my website yet but they are available from my ebay store. Listed as Phantom props. www.ebay.co.uk/sch/wolf-3-5-9/m.html?item=181442321671&hash=item2a3ece1d07&pt=UK_ToysGames_RadioControlled_JN&rt=nc&_trksid=p2047675.l2562
nice solidering skills.
Why ESCs not on top of arms? It would look good (IMHO) and also allow you to mount all antennas under each arm - maximal distance apart. E.g. Spektrum receiver + satellite + telemetry box + potentially video transmitter. Visibility of antennas below the body is better, I assume?
Also the air coming from the props would cool down the ESC
Hi, thanks for the video, its very complete.
Could you please explain why you placed the flight controller on the bottom plate? Is it a personal choice (less wires showing)? I always though that the battery should be on the bottom plate to lower the CG. Sorry, I'm a plane guy, sorry for my newbie questions.
hi, i bought this package last week and i cant thank you enough for the excellent service and very fast shipping, i have a question regarding the battery discharge rate, i bought a 3s 5000mAh with 35-70C discharge, can i use it with this build or not?
Thanks for your business. Anything above 25c is fine.
Very good information video .... thanks
This is a great video, it's explained so much - thank you. You'll be getting my order soon!
Thanks for your support.
Have you made the second part of this video? I am starting the build of a F550 with Naza V2 and E300 propulsion system.
Thank you for this nice video.
Greetings from Mexico
I've done the fitting of the DT7 radio but haven't got round to the full Assistant setup yet.
ruclips.net/video/4t4_noXYWu8/видео.html
It is not an issue to leave the bare ground wires from the ESC cable long. It is ground, it won't do anything if it touches anything. Just keep hot wwires from touching it. I don't like the way he put those cables, looks like it can cause undue stress on the solder joints. If it bothers you, you can heat shrink it after soldering and leave it longer, leave some strain relief in the cable
I built meany of these and never had a single issue the way I do it.
Thanks a lot for this video. Really helped me with my build.
Thanks for great and helpfull information...
Marionville Multirotors Do you think a 6000mah 25c 4s nano-tech battery is OK for this build?
Do you recommend using thread locker on the motor screws?
Willie Hill, Jr like he said, there is threadlock already on the screw. since this is a expensive kit. if u get kit from a cheap place then yes u have to put threadlock
Thank you for your clip. My ESC do not have coaxial but by black and white wires. Would white wire correspond to red wire in th older kits or the core of the coaxial cable in your clip? Thank you! Ivan
pls can a video transmitter alongside a camera be connected to this naza flight controller
I'm relatively new to quadcopters (I've owned a small one for several months) and I want to.... step it up! A lot of people are saying this quad is a great way to get into aerial filming, and that it's preferable to the Phantom. I'm definitely not going with the Phantom, as it seems overpriced and I'm worried about potential fly aways. I've soldered before, but only a few times. How easy is this to build and will I be worrying about fly aways with this quad? Thanks!
I'm doing the same thing right now. My F450 kit will arrive in a week. Was thinking about getting phantom, but turns out at work I know some people who build drones, and the word is for less money you can get better machine if you build yourself. There's extra fun of building, it's much more customizable, you can go with highly programmable chip like Ardupilot, and you learn while you select components.
Hey ,i am working on f450 quadcopter with kk2.1.5 .i have assembeled it but its showz error like no i yaw input and when it goes shows no pitch input can you help me out please
Could you please list all the components used to build this drone as im located in Australia and you guys don't ship here o i have to source parts separately
Thanks you help me so much. do you have another video explain how to fix the Giro?
Iv the f550 kit jus started building. was tempted to fold and strap the speed controller wires instead of trimming but thinking it could create some field interference when folded. For insulating the soldered contacts on can use clear nail polish or possibly just pvc glue dried over it.
+whiteknight7 I prefer the cables trimmed for neatness. I do now insulate the connections with Starbright Liquid Electrical Tape.
+Marionville Multirotors i folded it in case i decide to upgrade to a heavy lift attachment so then arms would be longer. Btw my naza lite kit 3 volt supply unit is only one cable. What is the norm wiring to power both the controller and the reciever? Do I put it in the naza x3 and then how do i jump it to the radio recvr? Im using the fs9xr which has a power jack.
+Marionville Multirotors you can insulate with regular pvc glue and let it dry or clear nail polish...tho the latter may dry and crack eventually and should be inspected or reapplied. Can use a high peformance epoxy but with be a dog to remove if you want to unsolder later
+Marionville Multirotors Also my f550 kit came only with the 10" props....is it still a safe load with a 4s battery with those 15a escs?
Hi, I am looking at buying this kit and I was wondering if I need to buy a remote control, a battery and also the battery connector separately?
Awesome, just AWESOME!!! I can't wait to build mine now! lol :-)
👍Like!👍
Super video!
Nice drone!
Thanks share!
👍☀️👆
Thank you for this video! Very helpful!
No problem.
Thank You Very Mush
You are Very Helpful
I'am beginner
Can you help me to install Gopro camera please
Can i buy a phantom 3 main biard and connect to naza m lite so i can connect Cellphone to drone for gps with google maps?
What battery do you recommend and what can of flight time are you getting out of it. thanks for the video
Exelentt video! to handle the soldering temperature? you do it too fast
thanks man! Helped me a lot! Thumbs up!
Can somebody please explain what he is doing at 22:14 ? I'm really new to quad-copters and I'd assume its for a battery connector but where would someone buy the two wires and the connector? Or is it included with something?
to ordering Flamewheel DJI F450 E305 W / Naza Light & GPS Package that currency is and what country is:
Hi Marionville Multirotors,
I have the same Kit and one thing that im strugling with is that i found the specificatin of the motor in internet and says that the current needed is Standard Current : 15-25A Max Current : 30A. But the current that the ESC provide is only 15A.
it doesnt make sense to me because the ESC must supply at least 20% more amps than the maximum amps the motor will pull.
Can you help me figure it out? Thanks for your time
Are you sure that the line on the naza board is the center?
Or do you have to place it in the middle of the quad?
As close as you can get it.
Will I be able to use these parts for this model?
Andoer walkera devo 7ch lcd screen radio system transmitter
Andoer walkera RX701 receiver
Battery connection XT60
Overlander li-poly 3S 30C 11.1 volt 200mah battery
However I cannot seem to find a charger to work with the battery
Thanks mate, brilliant walkthrough (",)
Hello, excelent video. Just did all that, bt connected a DT7 via dbus, and when arming, two motors will start but the other two don't. When throttling they will start but quad shakes a lot. Any hints?
Best regards
Doesn't sound right. I take it your using the E300 motors and esc,s? When you power up do all the esc,s beep together?
Hi firstly great video ! Do you have a similar one with the Naza V2 ? Also I currently have a Devo7 with 7" FPV monitor. Can you recommend a receiver and video transmitter that would be best for this kit and the F450 ?
Cheers in advance
Is the kit on your website include the DJI tune propulsion system? Or just frame, naza, and other brand motors & esc?
They always have the propulsion system and you have a choice if you want a flight controller.
Which battery connector does it come with? I am looking to buy the LIPO from hobbyking, but they just come with bullet connectors?
DJI don't supply a battery connector so you just choose the one that suits you. I would bin the bullet connector that HK supply and go with either deans or XT60.
hi
This is a great video. I also want to build a quadrocopter like yours. What do I have to buy all. Could you please write me what kind of system and controller I need with the DJI F450 Frame kit. Thanks
Your best to buy one the the F450 combos with the flight controller. Either Naza Light or Naza V2. Then all you need is a 6 or 7ch radio and receiver, lipo and charger.
Thanks a lot.
can you list your parts such as motors and esc? I have a similar F450, but mine is a Q450 which is the same. Mine is made by Diatone "Q450 Ghost"
It's all part of the F450 kit. You can but the propulsion system on its own. Latest version is the E305.
Hi just wondering with the combined led and pmu unit there's one 3 wire plug in that connects somewhere on the naza can you tell me where it goes?
It connects to the X3 channel.
thx for vid!
just need buy radio control and Drone will be ready to flight ?
Hello, can you help me? I have recently purchased the f450 kit but I'm struggling on the battery side of things, could you recommend a battery and charger to me?
Any 3s or 4s lipo with between 3000-5000mah will be fine. I recommend the 3s 4200 or 5000mah for best flight times. marionvillemodels.com/rc-shop/lipo-batteries-multirotors-quads-dji-phantom-f450-f550-flamewheels.html.
For charger a good quality AC/DC with at least 50watts. marionvillemodels.com/rc-shop/overlander-rc6-vsp-lipo-charger.html
I am just looking at this and the naza v2 on ur site ... I have a p2 already so I'm more looking for just an fpv quad now but it have to be at least over 20/22min of flight time on a good battery .....do you have any info on which battery gave you the better time .
Best regards
Aron
Your going to need a big battery. I would recommend a 5500 for that run time.
Excellent video build my DJI 450 along with your video, one question do I have to calibrate the esc E300 that comes with the kit? Newbie to this hobby,
No. The e300 ESCs don't require calibration.
Marionville Multirotors no? so its just plug and play basically
Could I add a cheap brushless gimbal and use it with a DJI controller? thanks.
WantedBanter yes you can. Connect the pitch control cable to F2 port on the Naza to give you the control.
How do you connect the naza m v2 as I am very confused! Thanks!
what is the size of battery you recommend?
Great Video!!
Question- I dont have the LED module, so i dont have the 4 pin ( only the 3 pin ), so im assuming i just dont put anything in that 4 pin in the controller? correct? i mean besides the LED i use to pug in and and hook up a usb and use the assistance.. or do i just leave that hooked up?
The Naza lights are different now. You'll have a separate led module and Pmu and not combined like in the video.
I go in to buy the kit dji f450 how much is it in us $dollars
from where you order and how much cost you pay
The little line stickers maybe for prop balancing ???
Turns out there for sticking the GPS mast into the holder to keep the mast tight. I would still glue it.
Can i use an AR610 spektrum receiver with the naza?
What if i put the down plate up and upper plate down( switch the basically) to put the battery lower centre ?
I can't see why that would be an issue.
nice!
did you have to solder to the frame the two power leads that come out the LED for the naza ? or does the naza get its power from one of the servo leads? cheers
You have to solder the PMU/LED module.
Marionville Multirotors turns out i never had to. works fine without the PMU. the BEC can power the Led indicator and the naza no problem.
Which screws go with the motors the longer ones or the shorter ones ?
There two different thickness so only one will for the motor. If it's a Fji Flamewheel.
I upgrade frimware version after the led is not working properly what problem occurred? please help me
Gobi Andreson can you better explain the problem.
When you are soldering the tin on the brass pads, is it okay to touch them with the solder tip?
Yes that's fine.
Hello , I just upgrade my quad from CC3D to naza m lite with all toys, but I cannot comunicate my naza m lite with the assistant , no green lights or show in the COM ports at all,in win xp vista or win 10 pc's.what to do I will appreciate your help in this matter.
Make sure the Installer software is installed properly. It's the most common reason.
is so simple which reason would be to get installed wrong
White electrical tape leaves way less residue
How do i find all these kits and pieces you used?
Here you go. www.marionvillemodels.com/collections/quadcopter-frame-kits-packages
hi mate now ive gone to a f450 with the naza lite setup can i run a cheap brushless gimbal and control the pitch from my dji transmitter
Yes you can. See my gimbal playlists, it's the same as fitting to the Phantom.
+Marionville Multirotors thanks
I saw that a gimbal could be used with the Naza lite and the DT7, can I stream video to my iPhone while the drone is in flight or would I have to use another screen if this is possible at all(I just want to see what I am recording when I record it). Sorry if this was answered before.
Its an analog system so you would need a monitor with video receiver on 5.8ghz.
Marionville Multirotors thank you, the video you made was also very helpful :)
Im glad it helped you. It was the first video i made back in 2014.
Marionville Multirotors would basically any 2-axis gimbal work with the Naza Lite and DT7?
Yes as you can control the tilt through the F2 port on the Naza.
Do you ship to new zealand cheers
how many channels do you need for this setup??
You need 6 to cover flight control and 7 if you have a gimbal.
the drone can fly without naza GPS??????
what type of solder is he using?
Just multi core solder.
will the DJI NDJ6 remote work with this
Yes that would be fine. I've used the Phantom remote and receiver a few times myself.
ok thank you so much
what size are the propellers
Isaac Cramer there 9"
where can i find those stuff.?
Which stuff.
How to control it
whats the motor
Can you bind this with a spektrum radio?
Robert Benson you would need the Srektrum receiver but yes it would work.
Would a 4s lipo be alright to use for this quadcopter?
+Collin Smith you can yes.
I've since gotten a 4s and flown with it. Man oh man! When you punch the throttle, it is amazing how fast it climbs!
Collin Smith a bit TOO fast for me at this stage lol.. i'll stick with the 3s for now :)
True, 3s is all you need.
will your store ship to the US? and can I pay$
Sorry I only ship within Europe.
ok thanks for the response back, Let me ask you if you don't mind, If I use a Naza M Lite can I bind it to any radio or does it have to be a anything special?
Anyone recommend a two axis gimbal for gopro hero 4 using this setup?
Walkera 2D gimbal is about best.
Can you put a cheap 3-axis gimbal from China on this build?
Yes that would be fine on this frame.
+Marionville Multirotors does a gimbal give you the ability to change the camera angle
Thanks
hyy what is the maximum range of f450 plz tell me
its dependant on your controller that your using
how can i get the kit u got??
Mike Low www.marionvillemodels.com/collections/dji-flamewheel-f450-f550-parts-spares-accessories-repairs
Thank you I'm trying to order a whole package you got