Dalawa spinning mop ko ganyan cguro problema. If magppalit na nmn ako ng handle sure gnyan din kklabasan. Ok sana ang spinning mop maganda ang drying kaso weak ang mga mop handle. Thanks bro sa video mo.
Bili nalang po ng bago mura lang naman po yan.wala po kc sa market ng spareparts nyan kaya mahirap din pagtyagaan i repair.thanks po pasubscribe nalang po if willing thanks po.
Kapg ganun po wala napo ngipin ung helical shaft.papalitan napo un.kaso wala po sa market nung ganung parts.ang ginawa ko po naghintay po aq sa magbobote.tyempo naman na meron xa sirang mopstick.binaklas ko at ok pa ung helical shaft.un po ung sinalpak ko.at buti naman naayos po.mejo mahirap lang tlga irepair po.thanks po.pasubscribe nalang po if willing thanks po
I hope napanuod nu po ung vid kung papano ko binaklas ung helical shaft.yan lang naman ang dahilan kapg di na umiikot pababa at pataas ung mopstick.kc di na nag memesh ung mga gear bet helical shaft at ung nakatwist na bakal na pumapasok sa helical shaft.
Good morning po.stuck up lang po yan.maybe may rust sa luob ng metal stick if metal po ung handle.magpakulo lang po kau tubig then buhusan ng dahan dahan ung dugtungan para lumambot ung plastic.kapg lumambot na pwd napo hilahin yan at laruin.kung maghiwalay po pwd po spray nu w40 ung luob.thanks po
Good morning sir.nahihirapan ako makahanap ng shop na kayang i fabricate ung shaft natin.im still looking for dito sa bulacan.I hope makakita aq sir.As soon as mkapag pa fabricate tau.gagawan ko agad vid sir.Thanks sa inquiry.Godbless.
@@davsportal1358 Mas mura pa siguro at madali pag 3D printed kahit plastic nalang kahit paulit-ulit pang masira dahil sa durability ng material na ginamit sa 3D print. Yeah, mas matibay nga magpagawa ng metallic version kahit aluminum pero ang hirap na maghanap ng gumagawa ng ganyan. 3D print nalang pinakamabilis na solusyon or if singmahal magpafabricate both plastic and metal sa pagbili ng bago, edi bumili nalang ng bago. Sayang ang mga produkto ngayon nga ginawa na talagang disposable. haist... plastic pa naman. Hopefully, ma repurpose nalang din para iwas plastic waste.
Honestly i find it hard to detache the rods,cause its fixed hard,pressed hard and had a support punched holes.the only way to detach it or accidentally be detach is by wrecking it intentionally.anyways,to remedy it is by creating or making another punch holes.u can use concrete nail to do so.thank so much.i hope i made help...😊
By the way its not rubber,its hard plastic.dont worry ill make part 2 vid for it.and ill include how to fix detached rods.thanks so much for your comment
@@elisajacinto6363 hehe,ou nga po.no offense kay manufacturer pero sana isinama nia sa marketing strats ung pagproduce ng spare parts.para hindi magiging disposable ung product.salamat po sa comment..
This vid doesnt only show how to repair.It also shows how to dis assemble things,and it shows how to use our foot.Same goes with our lives,whatever resources we could have,try to use those resources.And continue things u luv to do.Discovering things that puzzles u.thank u for ur comment maam.I appreciate it so much.😁
this was actually a video content for life's survival😁😅 not for the survival of the mop🤭...Felt dizzy while watching cuz it's really hard to be a camera man when you were actually the actor in the movie😊..Anyways we've got the tips we needed in repairing spin mop however I 've realized that it isn't that easy to revive it.😊😌tnx
Hahaha...good observation maam.truely what have u said.its about human survival not only mop survival. I have to think ways to earn extra money by being a vlogger.I just hope to be successful with this.Besides i luv doing vlogs it makes me feel useful.Thanks.
Dalawa spinning mop ko ganyan cguro problema. If magppalit na nmn ako ng handle sure gnyan din kklabasan. Ok sana ang spinning mop maganda ang drying kaso weak ang mga mop handle. Thanks bro sa video mo.
Salamat din po.sa pagsubscribe.
ayoko nalang pala mag mop HAHAHAH
Thanks so much to all who watched and liked this video.I appreciated so much 😁.
Thanks for the like.😁
smin kainis ang ingay mgmop naninigas n xa at maingay pg iniispin n..
Bili nalang po ng bago mura lang naman po yan.wala po kc sa market ng spareparts nyan kaya mahirap din pagtyagaan i repair.thanks po pasubscribe nalang po if willing thanks po.
Sir paano po ayusin yung handle po kapag nag spin siya pababa mahirap po mag spin pataas yung handle.?
Kapg ganun po wala napo ngipin ung helical shaft.papalitan napo un.kaso wala po sa market nung ganung parts.ang ginawa ko po naghintay po aq sa magbobote.tyempo naman na meron xa sirang mopstick.binaklas ko at ok pa ung helical shaft.un po ung sinalpak ko.at buti naman naayos po.mejo mahirap lang tlga irepair po.thanks po.pasubscribe nalang po if willing thanks po
I hope napanuod nu po ung vid kung papano ko binaklas ung helical shaft.yan lang naman ang dahilan kapg di na umiikot pababa at pataas ung mopstick.kc di na nag memesh ung mga gear bet helical shaft at ung nakatwist na bakal na pumapasok sa helical shaft.
sir gud day ung sa aqn nmn po pumasok ung handle n stock po n po sya d n humahaba at d rin po mahila ung handle n metal
Good morning po.stuck up lang po yan.maybe may rust sa luob ng metal stick if metal po ung handle.magpakulo lang po kau tubig then buhusan ng dahan dahan ung dugtungan para lumambot ung plastic.kapg lumambot na pwd napo hilahin yan at laruin.kung maghiwalay po pwd po spray nu w40 ung luob.thanks po
Sir panu mo po tinanggal ung s my gitna n parang lock
Binuhusan po ng mainit na tubig.
Kamusta na sir ang pag papafabricate? 3 mop namim ang ganyan ang prob. Di ko muna tinapon kasi baka may iba pang way na maayos
Good morning sir.nahihirapan ako makahanap ng shop na kayang i fabricate ung shaft natin.im still looking for dito sa bulacan.I hope makakita aq sir.As soon as mkapag pa fabricate tau.gagawan ko agad vid sir.Thanks sa inquiry.Godbless.
@@davsportal1358 Mas mura pa siguro at madali pag 3D printed kahit plastic nalang kahit paulit-ulit pang masira dahil sa durability ng material na ginamit sa 3D print. Yeah, mas matibay nga magpagawa ng metallic version kahit aluminum pero ang hirap na maghanap ng gumagawa ng ganyan. 3D print nalang pinakamabilis na solusyon or if singmahal magpafabricate both plastic and metal sa pagbili ng bago, edi bumili nalang ng bago. Sayang ang mga produkto ngayon nga ginawa na talagang disposable. haist... plastic pa naman. Hopefully, ma repurpose nalang din para iwas plastic waste.
boss pano naman po i fix pag na detached yung dalawang rod yung rubber po ba yung problema?
Honestly i find it hard to detache the rods,cause its fixed hard,pressed hard and had a support punched holes.the only way to detach it or accidentally be detach is by wrecking it intentionally.anyways,to remedy it is by creating or making another punch holes.u can use concrete nail to do so.thank so much.i hope i made help...😊
By the way its not rubber,its hard plastic.dont worry ill make part 2 vid for it.and ill include how to fix detached rods.thanks so much for your comment
Naku napakahirap naman pala ayusin . Sana may binebenta na separate sa.market yung mop lng kasi yun ang madali masira
@@elisajacinto6363 hehe,ou nga po.no offense kay manufacturer pero sana isinama nia sa marketing strats ung pagproduce ng spare parts.para hindi magiging disposable ung product.salamat po sa comment..
@@elisajacinto6363 may nabibili po na mop stick lng nsa 600 plus depende sa size.
magkano po..yung map
Nasa 500 something lang po yan maam.😊
But if ur asking about howmuch ung repair.for educational purpose lang po yan maam hence wala pong available na parts yan sa market.thanks po
Narepair ba?
Opo.sa part 2 po narepair po xa.
hello po may nabibili po b na pyesa nung pinalitan?
Sorry po exclusive lang po ang pyesa sa manufacturer.wala po sa market.
ang ganda ng title ei kaso hindi mu nman inayos,binaklas mu lang,jusmeyo
May part 2 po yan maam,sir.
Mahirap pla magretoke nyan
Take a help or keep mobile stand so that you don't have to struggle to make the video
Thanks po will do po.😅
Yung sa akin pwersa ko ayaw ksi umikot
narepair ba
Opo
Wala ka bng kanang kamay???
Sorry po wala pa po ako assistant kaya ganun po Sana po palarin na magkaron.thanks po pasubscribe nalang po if willing thanks po
Hindi naman na repair eh,, need pa magpafabricate ng metal, ganun dn gagastos dn pala
This vid doesnt only show how to repair.It also shows how to dis assemble things,and it shows how to use our foot.Same goes with our lives,whatever resources we could have,try to use those resources.And continue things u luv to do.Discovering things that puzzles u.thank u for ur comment maam.I appreciate it so much.😁
this was actually a video content for life's survival😁😅 not for the survival of the mop🤭...Felt dizzy while watching cuz it's really hard to be a camera man when you were actually the actor in the movie😊..Anyways we've got the tips we needed in repairing spin mop however I 've realized that it isn't that easy to revive it.😊😌tnx
Hahaha...good observation maam.truely what have u said.its about human survival not only mop survival. I have to think ways to earn extra money by being a vlogger.I just hope to be successful with this.Besides i luv doing vlogs it makes me feel useful.Thanks.
Ang bagal ng phasing ng video