Great video! Something worth mentioning is that the mob spawner can sometimes just be a treasure bastion, since those have magma cube spawners. Also, if the spawner is at a corner chunk of your render distance and you lower it by one, going one chunk in all four cardinal directions won’t make it show up. You are going to need to check the chunks diagonal to the one you are currently in. :)
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
@@Ikea_aka_kelab For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
thats where my problem comes in, i have laptop so if i do F3+F it will just increase the brightness of the screen so i'm wondering if i can just do it manually by going through the menu cuz i tried and but i think it glitches out cuz when i did it manually first the mob spawner showed up nowhere even with max render distance. so i reset and try again doing it manually but now its suddenly closer than frickin 2 chunks, i was like what in the gods name is going on so if anyone can help me pls do.
@@aonearslan There must be a fn key on your keyboard, just press shift + fn + f3 and you can open the pie chart and I believe you can press fn + esc to switch between function keys(f1, f2, ...) and hotkeys(volume, brightness, ...) on most of the laptops. In your case, you must in the hotkeys mode, so you have to press fn + f3 to use f3, or like I said, you can press fn + esc to change to function keys mode, but that way when you want to increase the brightness, you have to press fn + f3 instead. Ofc none of the two modes is better, it depends on how often you use function keys or hotkeys.
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
One point you missed in the video is how to reset the pie-chart so it stops detecting rendered entities which is simply shift + F3 twice, but thank you for explaining everything else
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
How to find one way easier. Open you pie chart by hitting shift + f3, press 2, than 1, than 1 again, than 3. Than slowly turn a 360 while refreshing the pie chart. Once it detects a spawner, go in the direction you where facing when it was detected.
INSANELY IMPORTANT NOTE: on some mods on minecraft (sodium or iris i think) pie chart is accessed by f3 + 1, this took me 2 days to figure out. hope this helps edit: this is actually not the mods but the newer versions of minecraft
For some reason the pi chart won’t reset after I lower the chunks like yours did. Once “mob spawners” are in, even if I lower my Render distance all the way, it won’t go away. The only way to do it is to quit and reload
lowering to 2 chunks and then pressing "f3 + shift" twice to turn it off and back on does a "soft reset" but minecrafts engine will always render stuff within 5 chunks even if you can only see 2 chunks. so as you said the only way to fix this is to quit the world and rejoin. it sucks but you'll only need to do this if the mob spawner is within 5 chunks of you (which it normally won't be)
yeah, you an do that by closing and opening the pie chart again, i'm somewhat of a speedrunner myself with a pb of like 25 mins. i would've never been able to do that if not for the pie chart, also, my pb is 25 min because i don't use stronghold calculator.
Sometimes the block entities might also be in the same page as entities but not the page when you select entities, so just hit the number for block entities.
Something isn’t right for me. The server I play on only allows 8 chunk render distance, so I just roam with the full 8 enabled until I see a chest and then back off the render to 7 in order to find the direction, which I did, but then after traveling about 7 chunks I don’t see the structure, so I back off the render distance to the minimum (2 chunks) and I’m still in range. So I go one direction until the chest drops out. Then I turn around and go back the other direction expecting to see the structure or the chest to drop off again after a couple chunks. I had to go 21 chunks before the chest drops off the other direction. It seems like this method is only narrowing the search to 400 chunks for me, if at all. I never found the chest or structure.
I generally forget liking videos and at first I forgot to like this video too and clicked some another video but I came back to just like this video , this video was THAT GOOD.Very easy to understand and not unnecessary long, thanks for this video.
Great video! Ik a lot of people have already asked this, but on new versions the pie chart doesn't refresh when the render distance goes down, and you have to exit and reload the world. This applies even if the spawner is more than 5 chunks away. As of now have there been any ways found to get the pie chart to update when the render distance goes down?
Gives me similar vibes to the mob IDs that used to be displayed over mobs heads through walls prior to Beta 1.8; useful, sure, but also very cheaty, probably shouldn't be available in survival by default.
2 years later and some things have changed if anyone was just as confused as I was for re setting the pie chart because I am blind you need to always hit 0 if you want to go back in the pie chart.
@@DamianPagel to go back to the original thing you were on so if you click tick and then level you can press 0 on your keys to go back down to tick and then 0 again to go back to the start of the pie chart
@@p3lerberdebu yes I forgot about that the biggest change was that shift+f3 no longer works and it is now shift+1 now sorry for not putting that in there.
any help? Im on 1.17.1 and when I open the pie chart I do root-tick-level, but when I click entities, it is just a list of the mobs around, no option for block entities. If you can help me thank u
I just want to say thank you for teaching me this thing. I dont even know that the pie thingy exists in the game. The way you teach things by simplifying it. It feels so good that i just learned it in a couple of minutes. I aint gonna make an essay tho, i just want you to appreciate my thanks. Good work!
you can look on tab to see their skin layer in the same way, you can also use pie raying to find bases that have enchanting tables, shulker boxes, or ender chests (theres some other ones but i cant remember them rn lol) i used this to find a lot of player bases on an anarchy server (one guy even hackusated me lol)
Hello everyone! If the Pie chart isn't opening up for you, just remember it is shift + f3... If that doesn't work it could also be f3 + 1. That worked for me.
quick question; How would I go into the menu of a name with a two digit number. Ex: My tick is the number 17 but 17 is not a key on my keyboard it is two keys. So how would I trigger tick?
Best use for pie chart is base hunting in my opinion. Many bases has atleast ender chest, enchanting table, painting or item frame which pie chart detects. So even if the base is well hidden underground with no clues that would lead to player activity, you will still find the base.
i used the pie chart for a long time now but I HAVE NO CLUE WHY it doesnt work now it doesnt open...i press shft it works i press f3 it works and i press them bothe and it doesnt appeir i mean the f3 menu does but the pie chart idk why...
Hey hello i have a question. When i am playing a get many fps drops and those fps drops occure always when tick is on the highest percentage on the pie , do you know why and a solution to this problem?
Hello. I have a problem. After I press the corresponding number next to "entities" , "block:Entities " does not appear. Also when I press F3 + F nothing happens.
Well the f3 + f quite possible that your using your laptop keyboard,so because of that f3 could be like a volume button so you need to press fn + f3 + f
i have the render distance at 16, and i can see a village tho it doesnt tell me theres any signs of villages (smokers) which i checked and there were smokers there... why is that
Hello! I play on a server. They know a lot about f3 pieray here. They make vaults out of barrels that aren't in the diagram. I was wondering if there is a mod that would allow you to add barrels so that you can see them too???
Im watching this in 2024 as I wanted to get into speedrunning and this has helped a lot, but I had a question, if I accidentally clicked on entities rather than block entities how do I go back to fix it?
its doesn't work because when i lower my render distance it does stay the same even if i turn to 2 render distance, i tried to change the place and it still doesn't work and when i press tick then level, it says block entities and entites, i pressed entities like you said but i don't saw any block entities after so i do 0 to go back and press block entities and its says minecraft spawners every times even when i lower my render distances.
When the pie chart data says a specific block (e.g. mob spawner) is 23 chunks away from you, does it count diagonally if the item is in a chunk which is diagonal from the chunk you're standing in?
if it is diagonal it's annoying because it will show up at (for example) 23 chunks, but when you lower your render distance to 22 chunks it won't show up in any of the 4 directions. you can still figure out which diagonal direction it is if you have enough experience with pie ray, but it's a niche scenario that you probably won't run into often
![Pieray - How to Find ANY Base in Minecraft [Debug Menu, Pie Chart]](http://i.ytimg.com/vi/e0LPTiWyVDo/mqdefault.jpg)
Great video! Something worth mentioning is that the mob spawner can sometimes just be a treasure bastion, since those have magma cube spawners. Also, if the spawner is at a corner chunk of your render distance and you lower it by one, going one chunk in all four cardinal directions won’t make it show up. You are going to need to check the chunks diagonal to the one you are currently in. :)
Very well said!
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
roro no way obby creator man!!!!
@@Ikea_aka_kelab For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
@@IamWone we are talking about Minecraft over here
Increase render distance: F3 + F
Decrease render distance: Shift + F3 + F
If anyone is wondering
how do you reset the pie chart when you change the tick and stuff
@@TigerMansion Pressing F3 and shift F3 resets the pie chart, if it still doesn’t work, reload the world.
@@lexachu_ ok thanks
thats where my problem comes in, i have laptop so if i do F3+F it will just increase the brightness of the screen so i'm wondering if i can just do it manually by going through the menu cuz i tried and but i think it glitches out cuz when i did it manually first the mob spawner showed up nowhere even with max render distance. so i reset and try again doing it manually but now its suddenly closer than frickin 2 chunks, i was like what in the gods name is going on so if anyone can help me pls do.
@@aonearslan There must be a fn key on your keyboard, just press shift + fn + f3 and you can open the pie chart and I believe you can press fn + esc to switch between function keys(f1, f2, ...) and hotkeys(volume, brightness, ...) on most of the laptops. In your case, you must in the hotkeys mode, so you have to press fn + f3 to use f3, or like I said, you can press fn + esc to change to function keys mode, but that way when you want to increase the brightness, you have to press fn + f3 instead. Ofc none of the two modes is better, it depends on how often you use function keys or hotkeys.
Speedrunners: I am 4 parallel universes ahead of you
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
@@IamWone wrong video
One point you missed in the video is how to reset the pie-chart so it stops detecting rendered entities which is simply shift + F3 twice, but thank you for explaining everything else
another way of resetting the pie chart is to press the 0 key to go back a selection
@@oakmastermind5862 THANK YOUU bro
@@oakmastermind5862godsend
@oakmastermind5862 unless there's a spawner right below, which I know there isnt, i cant get this to work
i found another garfield lol
pie raying in the end for end cities is cracked. saves so much time
For our sins we deserve eternity in hell, but God loves us so much he came as Jesus to pay the price of our sins through living a perfect life for us, his death and his resurrection so we can be forgiven and receive eternal life if we follow and obey him in faith FOR LIFE , Jesus loves u and desires to have a personal relationship with you of love, peace, redemption and obedience ✝️ May Jesus bless you, repent of your sins and turn to Christ before it's too late 🙏🏿❤️
How to find one way easier. Open you pie chart by hitting shift + f3, press 2, than 1, than 1 again, than 3. Than slowly turn a 360 while refreshing the pie chart. Once it detects a spawner, go in the direction you where facing when it was detected.
INSANELY IMPORTANT NOTE: on some mods on minecraft (sodium or iris i think) pie chart is accessed by f3 + 1, this took me 2 days to figure out. hope this helps
edit: this is actually not the mods but the newer versions of minecraft
THANK YOU SO MUCH 😭
I love you bro I didn’t know this❤
life saver
God bless you my good sir
OMG GUYS! Penney uploaded! No way!
I was gonna comment the exact same thing. I guess that's the point
Yes yes… Wait what?
how do i make my pie chart bigger
Yay
@@hypocrips2gui scale
For some reason the pi chart won’t reset after I lower the chunks like yours did. Once “mob spawners” are in, even if I lower my Render distance all the way, it won’t go away. The only way to do it is to quit and reload
lowering to 2 chunks and then pressing "f3 + shift" twice to turn it off and back on does a "soft reset" but minecrafts engine will always render stuff within 5 chunks even if you can only see 2 chunks.
so as you said the only way to fix this is to quit the world and rejoin. it sucks but you'll only need to do this if the mob spawner is within 5 chunks of you (which it normally won't be)
@@notPenneyor changing difficulty to peaceful for stopping spawner
yeah, you an do that by closing and opening the pie chart again, i'm somewhat of a speedrunner myself with a pb of like 25 mins. i would've never been able to do that if not for the pie chart, also, my pb is 25 min because i don't use stronghold calculator.
This video is underrated. I've been trying to use your bastion routes and your content is really informative. Subbed.
Quick question, some of the numbers under the Pie Chart were over 9, how do we select those?
you can't
Here are the new keybinds:
Old keybind = New Keybind
Shift + F3 = F3 + 1
Pressing number to navigate = Shift + number to navigate
THANK U SOO MCUH BRO NO ONE SHOWS THIS
Thank you soo much
I can't increase my render distance with Shift + F3 can you help?
how do i increase render distance without f3 + f?
thank you
Why the heck am i watching this? I have a college class in 4 hours that I didn’t study for. IVE ALREADY WATCHED THIS VIDEO
Roro Studios: *explains the pie chart*
beginner grefers: YES! YEEEEEEEEEEEEEEEEEEEEEEESSS!!!!!!!
It now is f3+1
Ty so much
this is the comment i was looking for XD i was so lost
W
Sometimes the block entities might also be in the same page as entities but not the page when you select entities, so just hit the number for block entities.
i dont get it
@@slipperyfellow8714 Just press the number for block entities wherever you see it
THANK YOU. I couldn't find blockEntities on the entities page
Something isn’t right for me. The server I play on only allows 8 chunk render distance, so I just roam with the full 8 enabled until I see a chest and then back off the render to 7 in order to find the direction, which I did, but then after traveling about 7 chunks I don’t see the structure, so I back off the render distance to the minimum (2 chunks) and I’m still in range. So I go one direction until the chest drops out. Then I turn around and go back the other direction expecting to see the structure or the chest to drop off again after a couple chunks. I had to go 21 chunks before the chest drops off the other direction.
It seems like this method is only narrowing the search to 400 chunks for me, if at all. I never found the chest or structure.
I was trying to find the entities myself for like 10 minutes and you showed me how to do it in 10 seconds, thank you so much!
Wow I’m 56 playing MC for 10 yrs and just learnt a bunch of stuff while flying between Perth and Sydney Ty
I generally forget liking videos and at first I forgot to like this video too and clicked some another video but I came back to just like this video , this video was THAT GOOD.Very easy to understand and not unnecessary long, thanks for this video.
but the thing is: no. matter where I go, the mob spawner thing is still there, so there is a mob spawner everywhere?
this is very intelligent, idk if i'd have found this out if i knew about the spawner detection
How do you access things with numbers greater than 9? For example, at 2:59 how would you access fpsUpdate?
i'm gonna be honest, I have no idea lol. but in all the hours i've spent speedrunning I've never needed to press anything that far down on the list.
I would love to know aswell
Great video! Ik a lot of people have already asked this, but on new versions the pie chart doesn't refresh when the render distance goes down, and you have to exit and reload the world. This applies even if the spawner is more than 5 chunks away. As of now have there been any ways found to get the pie chart to update when the render distance goes down?
how can i make the chart readable? cant find a texture pack or anything
@@ceoof52xp2 settings/language/ Unicode Font off
I actually love the pie chart, just helped me find a Bastion and it's actually so underrated, awesome video! :D
Gives me similar vibes to the mob IDs that used to be displayed over mobs heads through walls prior to Beta 1.8; useful, sure, but also very cheaty, probably shouldn't be available in survival by default.
2 years later and some things have changed if anyone was just as confused as I was for re setting the pie chart because I am blind you need to always hit 0 if you want to go back in the pie chart.
Hi how do I change the order of the pie charts cause I don’t understand
@@DamianPagel to go back to the original thing you were on so if you click tick and then level you can press 0 on your keys to go back down to tick and then 0 again to go back to the start of the pie chart
@@TinyTechnique what settings to find block entities
@@TinyTechniquei even have to click f3+1 insted shift+f3, maybe something more have changes
@@p3lerberdebu yes I forgot about that the biggest change was that shift+f3 no longer works and it is now shift+1 now sorry for not putting that in there.
fun fact: mojang removed the f3 + f and f3 + shift + f (for changing render distance) in 1.19
Ah, THATS why it wont work lol
That’s the least FUN fact I’ve ever heard
damn
i've never even used it and now it's gone :C
Oh, that's why it won't work, thank you :)
That is why it wont for hahah😂😂😂 meanwhile i was raging why this aint workiiiing😂😂
any help? Im on 1.17.1 and when I open the pie chart I do root-tick-level, but when I click entities, it is just a list of the mobs around, no option for block entities. If you can help me thank u
nvm got it, u need to be on 1.16 not 1.17 lol
@SorryDASH Gaming Ty
i think in the 1.17 update after level you just find block entities, because its not in entities anymore
@SorryDASH Gaming what about 1.18.1? optifine or whatever
Well after tick u just have to see when block entities come then click...for me on 1.19.2 it is after clicking level
I watched 2 other videos, and the animation with the red green made it really click for my smooth brain. Thanks!
Thanks you bro, i'm a french student and your video is really easy to understand. THANKS YOU
I just want to say thank you for teaching me this thing. I dont even know that the pie thingy exists in the game. The way you teach things by simplifying it. It feels so good that i just learned it in a couple of minutes. I aint gonna make an essay tho, i just want you to appreciate my thanks. Good work!
mine pie chat just says "unspecified" for all of eternity HELP
i think its a 1.19 thing, super annoying it doesnt work for me either
how do you get to the sections above 9
1:25 what if i messed it up and want to redo it? i tried rejoining the server i wanna use it into and its still the same
Edit: nvm
try pressing 0
@@mohamedgamil5569 fixed
Can you help me because i can reset it Not Even with 0
HOW DO YOU MAKE THE PIE CHART BIGGER, PLEASE HELP ME
The thumbnail helped me a lot in speedruns
Is there any way for me to enlarge the pie chart? it is really tiny for me and I can't see much. My gui scale is 4
Great video and good explanation
aaah yes, the literal built in x-ray circle that we've decided isnt cheating because.... it requires some math.
I remember watching this video while on bedrock. Since I got Java yesterday this is video is going to be helpful
TBH hiow do i make the pie chartbigger its just small
Do you know if there's any way to find players hiding underground (in lets say a UHC game) using the F3 pie chart?
I think yes, instead of choosing block entities you choose players
@@unavailableun yes probably
you can look on tab to see their skin layer in the same way, you can also use pie raying to find bases that have enchanting tables, shulker boxes, or ender chests (theres some other ones but i cant remember them rn lol) i used this to find a lot of player bases on an anarchy server (one guy even hackusated me lol)
@@unavailableun elaborate
@@blueberry_cheesecake can you explain better. i dont understand
I know how to use the pie chart for fortresses and I'm so confused when I am on 2 chunks it still says there's a spawner :/
you have to refresh the pie chart, basically just press shift + f3 twice to turn it on and off.
@@notPenney no i do but its still the same maybe i didnt check my tick and the stuff yo ushowed
@@notPenney yes that doesnt work, it does refresh on 1.16 versions, but not on 1.17
@@rankednotes5126 1.17 is fucked up in the context of pie chart
!.18 also doesnt work. you can go up, down, On.. OFF as much as you like, it wont reset :(
Hey I have a doubt
Im on 1.20.4 and the pieces chart is not showing up for me
Any idea wt to do?
Press F3+1. The key combinations sees to have changed. I didn't find the key comb to increase the render distance by one.
sussy baka
Great vid, love ur tutorials
what should i do if my pie chart is too small that i can't even see which number is which word?
Hello everyone! If the Pie chart isn't opening up for you, just remember it is shift + f3... If that doesn't work it could also be f3 + 1. That worked for me.
quick question; How would I go into the menu of a name with a two digit number. Ex: My tick is the number 17 but 17 is not a key on my keyboard it is two keys. So how would I trigger tick?
been looking around for an answer for this as well. gonna put my comment here so i get a notification if someone responds to it lol
found another comment with the same question And Penney didnt know either lol
Still no answer for this huh
actually, the most useful minecraft features are: walking, flying, placing blocks, destroying blocks, inventory.
After I pressed entities button there isnt block entities it shows as unspecified any help would be nice
In 1.19 , blockentities are a seperate category from entities
this is why I want computer to get access to to more cooler things
An underrated youtubeR "Penney"
I M not getting the block entities thing please help me put
How do u make ur pie chart smaller when i pull it up a bunch of stuff gets pulled up and i cant find block entitles
im using it for base hunting and this is the easiest tutorial i have seen thank you
Thanks for telling us about the feature that has no way to be activated so useful
f3 + 1 . binding has changed
Best use for pie chart is base hunting in my opinion. Many bases has atleast ender chest, enchanting table, painting or item frame which pie chart detects. So even if the base is well hidden underground with no clues that would lead to player activity, you will still find the base.
great video lmfao
the other videos are too long and convoluted
pls help i cant open Pieray i press shift and F3 and is show just clasic F3 can anyone help?
f3 + 1
For me it detects spawners regardless of whether my render distance is 64 or 2, i just cant stop detecting it so i can tell how far away is it
when i do entities block entities does not shw
I have a big rectangular graph thing down there too. Know how to make that go away?
i used the pie chart for a long time now but I HAVE NO CLUE WHY it doesnt work now it doesnt open...i press shft it works i press f3 it works and i press them bothe and it doesnt appeir i mean the f3 menu does but the pie chart idk why...
f3 + 1
I got screwed while using this trick inside a stronghold which was merged with a mineshaft
Bit late but, if i wanna find like bastion i just look for interactable block native only to bastion?
mine will not stop showing just unspecified
I read "Useful" as "Useless" and clicked on it anyway
lmao
what do you mean if i press any number it resets everithing and then theres only unspecified
Hey hello i have a question. When i am playing a get many fps drops and those fps drops occure always when tick is on the highest percentage on the pie , do you know why and a solution to this problem?
I think they change it to root.tick.level.blockEntites
Did it work like that
@@pogcatz they changed the order in which you find it
After you press blockentities do you need to do anything else
@pogcatz no. You have to be close to a blaze spawner
how do you only have the pie chart and not all the extra things?
it is f3+1 btw now
thank you so much
Your welcome!
Pie ray for woodland mansion
anybody know a way to make the pie chart text bigger? cant read it at all
can u help my debug menu is so small
change gui scale in video settings
thank you so much, i'm going to use this to find passive mobs. sheep, here i come!!!
belt backwards to remember what to press
the pie chart wont open on the f3 menu when i try to is it somehow that i have un binded it
Like and subbed. Thank you for this simple and to the point tutorial.
Hello. I have a problem. After I press the corresponding number next to "entities" , "block:Entities " does not appear. Also when I press F3 + F
nothing happens.
Well the f3 + f quite possible that your using your laptop keyboard,so because of that f3 could be like a volume button so you need to press fn + f3 + f
I think they change it to root.tick.level.blockEntites
Awesome tutorial i can prob find some bases on my server with this
i have the render distance at 16, and i can see a village tho it doesnt tell me theres any signs of villages (smokers) which i checked and there were smokers there... why is that
The f3+f dose not work for me.
My version is 1.20.4 forge. Is does it not work on forge?
This wwd so well explained!
How to make that menu for video settings?
Hello! I play on a server. They know a lot about f3 pieray here. They make vaults out of barrels that aren't in the diagram. I was wondering if there is a mod that would allow you to add barrels so that you can see them too???
Well that's karma for you using it to grief bases.
Im watching this in 2024 as I wanted to get into speedrunning and this has helped a lot, but I had a question, if I accidentally clicked on entities rather than block entities how do I go back to fix it?
hold F3 and press 0
THANK U MASTODON
yeah ok but how do i change on what i want it to show?
its doesn't work because when i lower my render distance it does stay the same even if i turn to 2 render distance, i tried to change the place and it still doesn't work and when i press tick then level, it says block entities and entites, i pressed entities like you said but i don't saw any block entities after so i do 0 to go back and press block entities and its says minecraft spawners every times even when i lower my render distances.
how do you reset it because if i accidentally mess something up i cant reverse it
When the pie chart data says a specific block (e.g. mob spawner) is 23 chunks away from you, does it count diagonally if the item is in a chunk which is diagonal from the chunk you're standing in?
if it is diagonal it's annoying because it will show up at (for example) 23 chunks, but when you lower your render distance to 22 chunks it won't show up in any of the 4 directions.
you can still figure out which diagonal direction it is if you have enough experience with pie ray, but it's a niche scenario that you probably won't run into often
that explanation was on point nd very ez to understand
My pi chart is really small and I can't read it. Can someone help me?
when i open the entities it only show unspecified, I've tried using another version and it still didn't work....
I cant use shift f3 i have to use f3+1 does this still work otherwise
How do you have the box that can change your render distance? Is it a mod and if so what is the name of it?
I believe that is either the settings menu of sodium or lithium. They are fabric mods that increase performance.
Instant like and sub
🏆 thank you Good Sir 🎩