HOW TO GREASE YOUR BOBCAT MINI EXCAVATOR
HTML-код
- Опубликовано: 8 сен 2024
- In this video I cover all the key points of greasing your machine properly; typically every 8 hours. I make these videos as little training videos to show all of our new employees. Please subscribe to my channel, so I can continue making these videos.
tks for sharing !!! 🎉
Help information mate. Awesome NZ
Should have got the machine with the full cab, heat and AC with radio is a must have!
It was almost $12,000 additional and we don't use the machine enough to justify that expenditure. Our skid steer has full cab heat and AC, but we use that year round.
@@danczubaI think I paid $75000 plus tax Canadian. This is the e35i with full cab, AC, Radio, extended arm with counter weight. Probably the best machine we've ever owned. I love it.
E26 without the thumb gas a lot less zerts. Any videos without the thumb open cab
Where are the grease jerks on the idler and drive for putting the track back on when it comes off? The machine is a 2020 Bobcat E26.
Thanks!
On our e35i there is an opening in the center of the side of the undercarriage, that there is a grease zerk attached to a piston that expands when you pump grease into it. On the older machines you had to take off and access panel, With the newer ones the zerk is just sitting inside of a hole.
How do you ensure you don't blow out the slewing ring seals? I heard they can be blown out quite easily...
2 pumps, rotate cab 25%, 2 pumps, rotate cab 25%, etc. The key is not to over grease
Do you use moly grease on the slewing turntable inner part where the bearing balls are?
Hi temp wheel bearing grease works great. Been using over 15 years
Is there any grease zerts on the tracks
No...just the ones to put tension on the track adjustment
1st timer here. How much grease will I need to buy (in 14 oz tubes) for all the lubrication it needs? Is one or two tubes enough? Thanks
Figure on one tube per maintenance interval, for 3 machines.
@@danczuba Cool! Thanks
@@pharmdog1 Buy in bulk, 8hrs is not long.
I work at an equipment rental place and I’d say one tube is good for 1-3 greasings on the E20, maybe four. If you can afford it I’d buy in bulk. Thinking about it again, if someone has a mini excavator they should be able to! Lol
@@wyattandwill12 Awesome! Thanks