HK should sell a wireless Subwoofer to complement the Studios, It would be nice with the same shape which is very efficient for bass and cancels unwanted reflections, also good structurally
I'm guessing you simple did a Y connector to the high-outs in the Harman? Kinda smart. Would it work with a High-in on a subwoofer with said parts? That way you wouldn't need the converter.
Hi, i have two hk onyx studio 4, and I would like to connect them to a Subwoofer, i'm really ignorante in this field, and i'm wondering if i can make it with , for example, a Mackie CR8S-XBT or any other similar... thanks
It works well to do this, I've done this before wuite a few times. Your audio sounds pretty nive the, especially with it being recorded by a phone. I use digital technology as well where I install an active crossover so you cam actually change the frequency coming out of the jack to make it compatible with virtualy any sub, nive work though. Olus I custom built my own loc (line output converter). More complex but you know what you're really getting.
I have a Harmon Kardon Onyx 2 on it it’s 4-5 live.. legs broke off.. I mean cosmetically it’s fine.. looks great but once the legs go She’s just mot the same.. I have a Bose theater.. I want to connect to it..?
I've got two of them and they do sound great together. The added sub adds a whole nother level though. I'm going to put a sub output on my other one too.
the Harman kardon onyx studio 3 only plays down to 50hz but when the Bluetooth and volume down button are pressed together until the power light turns red it can play down to 10hz
this needs to happen each time the device is turned on and to turn the feature off but as of now it is not recommended as it can damage the amp and the drivers, finally at the lower volumes it makes the speaker sound like a cheap speaker
Hello i have an onyx studio 3 and I want to have information about the trick with the low level button and the Bluetooth button! Does it increase the power? What does it change! Can you contact me please!? Maybe can we speak in messenger!
Antonio Simeone It just boost low frequency at higher volumes, but Studio 3 will shut off by itself cause it requires a lot of power, and if it is possible to work at higher volumes, it can kill the amp/speaker drivers
This will not work on Onyx 4, HK made the front grill not-removable. Terrible, can't replace the battery in the future as well. I took the rubber piece that goes around the edge off exposing switches, still everything is shut. How in the world will they service these inside?
marcin97 ahahaha thats what i thought in the beginning, it will come off if you use coins to hold it and have some patience, it is just more tight sealed than the other onyx studio speakers. Hope you could see mine its beautiful. You just take the grill off not the rubber surround Edit: you start only from the bottom
HK should sell a wireless Subwoofer to complement the Studios, It would be nice with the same shape which is very efficient for bass and cancels unwanted reflections, also good structurally
I added a 3-way 4channel crossover.really sounds powerful, and totals 7channels
Hi Karen, do you have a video to show what you have done?
I'm guessing you simple did a Y connector to the high-outs in the Harman? Kinda smart. Would it work with a High-in on a subwoofer with said parts? That way you wouldn't need the converter.
What about connecting the Onyx to a Bluetooth configured subwoofer ?
I want to do this to one of my Studio 4, possible?
I’m interested in getting this done to my HK Onyx Studio 4 speaker. Are you still doing this?
Hi, i have two hk onyx studio 4, and I would like to connect them to a Subwoofer, i'm really ignorante in this field, and i'm wondering if i can make it with , for example, a Mackie CR8S-XBT or any other similar... thanks
That shit is gangster man!!!
Ok bro, respect for playing Mary J. Blig
Does it work on klipsch r-10sw and harman kardon aura studio 2?
Hmm
I ordered the studio 3. Should be here this week. Let me know how to contact you so I can get this done.
Ugotisaac @ yah oo.com
Coulda saved a little shipping if you would have sent it directly to me but hindsight 20/20
It works well to do this, I've done this before wuite a few times. Your audio sounds pretty nive the, especially with it being recorded by a phone. I use digital technology as well where I install an active crossover so you cam actually change the frequency coming out of the jack to make it compatible with virtualy any sub, nive work though. Olus I custom built my own loc (line output converter). More complex but you know what you're really getting.
Can it be done on the ónix 5? Can it be done to two and link at the same time?
I have a Harmon Kardon Onyx 2 on it it’s 4-5 live.. legs broke off.. I mean cosmetically it’s fine.. looks great but once the legs go
She’s just mot the same.. I have a Bose theater.. I want to connect to it..?
Pointless with a portable Bluetooth speaker 😂 and I've got one and sounds great as a stand alone.
Does it really need a subwoofer though? I'd rather just link it together w another one and call it a day.
I've got two of them and they do sound great together. The added sub adds a whole nother level though. I'm going to put a sub output on my other one too.
How can I get you to put a subwoofer input on my Harman Kardon Onyx Studio 4 -Dwayne is the name
Dwayne Phillips I don't think the grill comes off of the onyx 4
is there a away to connect onyx 4 with my harman kardon sb20? thank you
I have the Harmon Kardon Onyx 4. Can it be done. If so. How do i contact you. Or ship to etc
I don't do these anymore, too much liability involved. I started to make a how to video but only got as far as the "parts needed" prep video
Hi can you help me saying me witch of Harman Kardon Onyx Studio sounds better. 1,2,3 or 4?
José Alejandro García Arechavala model 1 sound best. Had studio 3 didn't sound the same
I tested extensively 2 vs 4 today at home and 2 sounds cleaner. Not keeping 4 as the fron grill cannot be removed at all. Can't take it apart.
I wanna do the same to my Onyx 4 , but seems impossible?
I need this
I wouldlike to know how to do it
the Harman Kardon onyx studio 3 does emit sound down to 20hz after further review
the Harman kardon onyx studio 3 only plays down to 50hz but when the Bluetooth and volume down button are pressed together until the power light turns red it can play down to 10hz
TigerTechnology can you explain this for me, is this permanent? or must i do this procedure each time?
this needs to happen each time the device is turned on and to turn the feature off but as of now it is not recommended as it can damage the amp and the drivers, finally at the lower volumes it makes the speaker sound like a cheap speaker
TigerTechnology oh ok cool thanks man,i leave it alone
Are u still adding the subwoofer out ?
That's real nice. Are you still doing this?
Narciso Mendoza yes I am, I live in Bentonville AR
Will this modification effect the sound quality of the speaker at all?
Email me at astaroth0360@gmail.com
Hello i have an onyx studio 3 and I want to have information about the trick with the low level button and the Bluetooth button! Does it increase the power? What does it change! Can you contact me please!? Maybe can we speak in messenger!
Antonio Simeone It just boost low frequency at higher volumes, but Studio 3 will shut off by itself cause it requires a lot of power, and if it is possible to work at higher volumes, it can kill the amp/speaker drivers
This will not work on Onyx 4, HK made the front grill not-removable. Terrible, can't replace the battery in the future as well. I took the rubber piece that goes around the edge off exposing switches, still everything is shut. How in the world will they service these inside?
marcin97 ahahaha thats what i thought in the beginning, it will come off if you use coins to hold it and have some patience, it is just more tight sealed than the other onyx studio speakers. Hope you could see mine its beautiful. You just take the grill off not the rubber surround
Edit: you start only from the bottom
How can I get this done? can I shipped this to you when and how? Thanks
I'll hook it up