Hey Kenny! Command+Option+Left Drag allows fades across any selected items, regardless of position or tracks. It's one of my favorite features and I use it daily!
The BEST thing about your videos, is that when you use Effects, you don't whip out some $350 effect that a lot of us maybe can't afford, and instead, you use the stock plugins that come with Reaper while at the same time, showing us that the stock FX work just as good as the expensive ones.
I love reaper. Thanks to you I learned my way with Reaper from watching your videos. I’ve used almost every DAW known to man, and nothing works for me the way Reaper does. Such a great DAW.
Your videos are what I have been searching for - clear, logical, well-explained activities that I actually WANT to do in Reaper and not overly complex deep dives into ‘nano-functions’…best Reaper videos on YT by a mile - many thanks 👍🏼
Kenny, you are a treasure! I hope Cockos is paying you, or giving you free stuff or something! You are a great spokesperson for Reaper and I would NOT have it but for your tutorials! Thanks for another WINNER!!!!
Hi Kenny, Thanks very much for all your Reaper instruction. Your videos are a great help to me. I now have a problem I can’t seem to solve through RUclips videos of any kind. I’m simply trying to setup a mono outboard unit (preamp or reverb) through Reaper. Here’s what I’ve tried. Connections mono Interface SSL 12 with 6 ins / 4 outs Out of SSL 12 to In of outboard In of SSL 12 to Out of outboard Reaper setup here’s where it all go wrong Channel 1 routing Add new hardware out to 3: send to trk 2 Channel 2 print trk = add reaInsert Hardware sends to 3 and Hardware returns to 3 But there is no signal to the outboard gear. I’m lost can you help. Best, Jim
New to reaper was the split items under mouse cursor under a default setting? I had to manually set the cursor above the tracks and it split at that point I found a Split Item Under Mouse Cursor in in actions and mapped it to "Q" i Just have to toggle the magnet for it to split not at the grid lines These tutorials been very helpful coming from Fl Studio Was thinking of doing edits in fl and coming over to reaper to mix but its looking like editing may be even smoother than FL
7:55 I think you can fade them from that position, just hold ctrl + alt while clicking and dragging from the corner of the media items. I think that's the default behavior.
Kenny, thank you for all your lessons, they are super helpful! One question if I may: When I hit S on keyboard, I get split not where my cursor is, but at playback line, why is that different from your video? :)
Hi Kenny! Thank you for the excellent videos regarding Reaper! I am a radio producer. I produce broadcasts, podcasts, reports and audio documets. My work is often done very quickly, because that is what my boss requires of me. I've noticed that when I make a cut of a clip with a section removed (and pasted to the end), it's not until I double-press the spacebar that playback starts. It's as if a time buffer is needed. Have you noticed such a situation? It annoys me a lot, because I lose precious time because of it. It happens that in a sound that is 20 minutes long I make several hundred cuts. I work on very powerful computers, so I don't think it makes any difference. It's the same on every computer. I also have the latest version of Reaper. Best regards!
Hello, in the recording I made in Reaper, there is no fullness in the sound, it seems like the bass is weak, I get a weak output when I compare it with any song, for example, the guitars are very weak, I am not talking about stereo, the sound is good, but it is obvious that the tone is not as bassy, what should I do about this?
the subtext of this video is "there is no basic audio editing of a waveform in Reaper". i can't tell if the rest of it is ironic or not. to me basic audio editing is to click on a waveform and select and adjust the gain of any selection. or silence it, or copy it, drag it, process it, scrub it. but it seems Reaper doesn't even let you look at the waveform very closely o.O i am, of course, supremely impressed that it auto-names the track to the name of the audio file. what joy.
interesting. I was trolling the Reaper vids to see if I could somehow edit out a small blip on the end of held guitar note on a single track. I just want to chop off the tail of it within the track. I'm guessing I'll have to just delete the whole track for that little micro-second, but then I can't move the entire track around or process the entire track like I want. Let me know if you find anything else on editing the waveform itself, if you would please.
So, can you load like... old 1990s geocities website background music midi files into reaper and assign different instruments to the tracks? How would I do that? I'm new and want to just mess around with weird stuff for a bit.
Wow Just wow Been 'using' this program for a lil over a year [or so...] now. Or have I been? Apparently not. lol. Not really. Well, we are fixing that today! These features & functions are sooo cool! Thank again, friend! I feel like I have so much POWER now!! Bwahahaha!! [jk. per that evil overlord laughter. Or am I?] We will see.... Means methods and modes - now grokked more fully, either way.
3:57 is the key (note / tone) staying the same when the speed changes? I'd like to try this on my vocals and guitar solos if the pitch stays in tune...
Sir I want to play 🎷sax with my guitar using vst plugins how do i go about it please🙏 help Reaper my Daw, Focusrite solo audio interface I have download the saxophone vst but can't get any sounds
Do you offer any 1-on-1 tutorials thru zoom or whatnot? I'd gladly pay for a tutorial that focuses on some of the issues that I am having with Reaper, Ample guitars and Amplitube!
Healing doesn't create anything new. It just heals the splits. Glue makes a whole new item. And if there is content on on either side that isn't visible, it won't be part of that glueing. Meaning you can't trim it back out.
@@REAPERMania thanks for the FYI. so if I do any changes, chances are heal isn't going to work, but glue will always stick everything together, as long as the sections are selected. I thought maybe my heal button was broken or I was doing something wrong. Arigato.
Hey Kenny, I am having issues with sending my bands project to get mixed. I have made multiple attempts at sending over the consolidated project to them but everytime I send it to them it play super slow. I have checked the ramp rates, time lapse, and just about everything else. Is there any way you can assist me with getting this sent over to him and playing correctly? I greatly appreciate it
This is totally off topic... but I can't figure out a way to send you a direct message. I'm having an issue in reaper and you are always my go to...if you get this message can you PLEASE reach out to me
Hey Kenny! Command+Option+Left Drag allows fades across any selected items, regardless of position or tracks. It's one of my favorite features and I use it daily!
The BEST thing about your videos, is that when you use Effects, you don't whip out some $350 effect that a lot of us maybe can't afford, and instead, you use the stock plugins that come with Reaper while at the same time, showing us that the stock FX work just as good as the expensive ones.
We really don’t NEED any third party vsts.
Reaper has awesome plugins so you’re set. The additional JS plugs makes other even more awesome.
I love reaper. Thanks to you I learned my way with Reaper from watching your videos. I’ve used almost every DAW known to man, and nothing works for me the way Reaper does. Such a great DAW.
... you made my day ! After 15 years of using Reaper - I still discover nice & helpful tricks !!!
No matter how well you know something, there's always something to learn.
Excellent! So much useful info in a handful of minutes. This is the video I wish I had when I started using Reaper years ago. 🏆
Kenny is the man. Since day one!
I've watched all 900+ videos on this channel and gained so much invaluable knowledge. You're a beast, Kenny!
Your videos are what I have been searching for - clear, logical, well-explained activities that I actually WANT to do in Reaper and not overly complex deep dives into ‘nano-functions’…best Reaper videos on YT by a mile - many thanks 👍🏼
Brilliant, brilliant video. A thousand thanks KG.
Concise, informative, and to the point, that's what I was looking for.
Thank you. Straight and to the point.
It's an honor to be the first viewer of this video. Thank you for the great work
I've been clicking and unclicking the magnet button to toggle snapping a LOT. I could have just held shift. 🤦♂Thanks, great video on the basics
Me to, shift makes it a lot easier!
Always useful information clearly explained. Thanks for sharing your knowledge.
This film gave me everything i needed for my voiceovers, GJ, thak You very much sir!
learned a ton, quick, easy no BS, loved your tuto.
This is just what I needed.
Thanks.
Kenny, you are a treasure! I hope Cockos is paying you, or giving you free stuff or something! You are a great spokesperson for Reaper and I would NOT have it but for your tutorials!
Thanks for another WINNER!!!!
Hi Kenny,
Thanks very much for all your Reaper instruction. Your videos are a great help to me. I now have a problem I can’t seem to solve through RUclips videos of any kind.
I’m simply trying to setup a mono outboard unit (preamp or reverb) through Reaper. Here’s what I’ve tried.
Connections mono
Interface SSL 12 with 6 ins / 4 outs
Out of SSL 12 to In of outboard
In of SSL 12 to Out of outboard
Reaper setup here’s where it all go wrong
Channel 1 routing Add new hardware out to 3: send to trk 2
Channel 2 print trk = add reaInsert Hardware sends to 3 and Hardware returns to 3
But there is no signal to the outboard gear. I’m lost can you help.
Best, Jim
Thankyou again. Bite-sized tutorials.
hello Yes I feel the same!! Mr. Keep Going. I love your Vídeos !!!
I'm shocked at how many of these I didn't know!
Never shocked, Reaper is like an easter egg, or a russian doll. There is always more inside, and Kenny knows where the prizes are buried.
New to reaper
was the split items under mouse cursor under a default setting?
I had to manually set the cursor above the tracks and it split at that point
I found a Split Item Under Mouse Cursor in in actions and mapped it to "Q" i Just have to toggle the magnet for it to split not at the grid lines
These tutorials been very helpful coming from Fl Studio
Was thinking of doing edits in fl and coming over to reaper to mix but its looking like editing may be even smoother than FL
Sir you are doing great job, i always see your video on youtube. please make a detail tutorial on Reacomposer. Thankyou sir.
Super bueno este tutorial gracias Kenny
7:55 I think you can fade them from that position, just hold ctrl + alt while clicking and dragging from the corner of the media items. I think that's the default behavior.
GREAT lesson, but that “S” key doesn’t work the same for me. Are you holding a modifier or doing something with the mouse? Love your lessons !!!
Thank you Kenny 😘
When you heal the split items does that apply the fade in and out to the audio? Thanks for another great video.
I learn something new every video I watch. Alt click drag contents of item. Neat
Kenny, thank you for all your lessons, they are super helpful!
One question if I may: When I hit S on keyboard, I get split not where my cursor is, but at playback line, why is that different from your video? :)
Hello, Kenny. Does it change the key when you squeeze or stretch a track?
Thanks! I've been using Reaper for my bass covers but looking to further my knowledge of Reaper 👍
How do you get the razor tool on Mac? When using the key you show, it just copies the waveform onto itself, no blade tool.
Hi Kenny! Thank you for the excellent videos regarding Reaper! I am a radio producer. I produce broadcasts, podcasts, reports and audio documets. My work is often done very quickly, because that is what my boss requires of me. I've noticed that when I make a cut of a clip with a section removed (and pasted to the end), it's not until I double-press the spacebar that playback starts. It's as if a time buffer is needed. Have you noticed such a situation? It annoys me a lot, because I lose precious time because of it. It happens that in a sound that is 20 minutes long I make several hundred cuts. I work on very powerful computers, so I don't think it makes any difference. It's the same on every computer. I also have the latest version of Reaper. Best regards!
I haven't noticed anything like that. No. What buffer settings (block size) are you using?
@@REAPERMania I'll check it tomorrow and write you. Do you think it matters for a good computer?
Can you put FX on the right screen in the Next update? like Studio one.Thanks
Hello, in the recording I made in Reaper, there is no fullness in the sound, it seems like the bass is weak, I get a weak output when I compare it with any song, for example, the guitars are very weak, I am not talking about stereo, the sound is good, but it is obvious that the tone is not as bassy, what should I do about this?
Can you remind us how to get the left drag razor edit and lasso select buttons on the toolbar please? Thanks!
ruclips.net/video/TLhIHNp1zWU/видео.htmlsi=pk4Mx72IN5kOTSlJ
when did they add "Heal they splits"?
In the name of Lord Reaper, I command thine splits to be healed.
a long time ago, before September 2019 at the latest
the subtext of this video is "there is no basic audio editing of a waveform in Reaper". i can't tell if the rest of it is ironic or not. to me basic audio editing is to click on a waveform and select and adjust the gain of any selection. or silence it, or copy it, drag it, process it, scrub it. but it seems Reaper doesn't even let you look at the waveform very closely o.O i am, of course, supremely impressed that it auto-names the track to the name of the audio file. what joy.
interesting. I was trolling the Reaper vids to see if I could somehow edit out a small blip on the end of held guitar note on a single track. I just want to chop off the tail of it within the track. I'm guessing I'll have to just delete the whole track for that little micro-second, but then I can't move the entire track around or process the entire track like I want. Let me know if you find anything else on editing the waveform itself, if you would please.
So, can you load like... old 1990s geocities website background music midi files into reaper and assign different instruments to the tracks? How would I do that? I'm new and want to just mess around with weird stuff for a bit.
please make one for the midi editor
thank you!!
Wow
Just wow
Been 'using' this program for a lil over a year [or so...] now. Or have I been? Apparently not. lol. Not really.
Well, we are fixing that today! These features & functions are sooo cool! Thank again, friend!
I feel like I have so much POWER now!! Bwahahaha!! [jk. per that evil overlord laughter. Or am I?] We will see.... Means methods and modes - now grokked more fully, either way.
3:57 is the key (note / tone) staying the same when the speed changes? I'd like to try this on my vocals and guitar solos if the pitch stays in tune...
Yes, and if you go into media item properties F2, you can adjust pitch and other various tidbits
@@pnutbuttajellee1394 thanks! i'll be trying it
Sir I want to play 🎷sax with my guitar using vst plugins how do i go about it please🙏 help Reaper my Daw, Focusrite solo audio interface I have download the saxophone vst but can't get any sounds
Do you offer any 1-on-1 tutorials thru zoom or whatnot? I'd gladly pay for a tutorial that focuses on some of the issues that I am having with Reaper, Ample guitars and Amplitube!
is there a difference btwn healing and glueing?
Healing doesn't create anything new. It just heals the splits. Glue makes a whole new item. And if there is content on on either side that isn't visible, it won't be part of that glueing. Meaning you can't trim it back out.
@@REAPERMania thanks for the FYI. so if I do any changes, chances are heal isn't going to work, but glue will always stick everything together, as long as the sections are selected. I thought maybe my heal button was broken or I was doing something wrong. Arigato.
Hey Kenny, I am having issues with sending my bands project to get mixed. I have made multiple attempts at sending over the consolidated project to them but everytime I send it to them it play super slow. I have checked the ramp rates, time lapse, and just about everything else. Is there any way you can assist me with getting this sent over to him and playing correctly? I greatly appreciate it
Kenny G!!!
Videolarınızda Türkçe dil seçeneği yokmu? Alt yazı çeviri yapıp izlemek istiyorum ama Türkçe Dil görünmüyor :( varmıdır bir yolu ?
Jesus had John The Baptist: REAPER has Kenny!! Biblical Info!!
Book is book.
This is totally off topic... but I can't figure out a way to send you a direct message. I'm having an issue in reaper and you are always my go to...if you get this message can you PLEASE reach out to me
💪🏼
!!!!
😮😮 very Bad bro 😮😮
Please make Reaper a Multi Touch response in the Mixer Faders for Touch Screen Monitors.🙏❤️😇