Hello Truly a very helpful video for the beginners. You explained well about all materials used. And very easy design to follow. Watched your video first time. Will now subscribe to your channel. Good work and good teaching skills 👍 One question pls: can you pls share the paint colour name. Thanks
Thanks for watching and the kind words 😊 welcome to the channel and I hope to have you as a returning viewer. The painting was by wherein William and the colour name is called Big Chill, it's one of the best selling colours they have and I use this a lot for many of my projects, it's a very nice and modern colour. I also have other accent wall videos, if you are interested please be sure to watch them also, all the best 👍. 😊
Thanks so much for the video! Question: after measuring the wall how do you make sure all the pieces fit evenly all the way across? I know you had 3” & 5” but how do you know how many pieces to fit across so there isn’t a giant gap once you get to the end? Thank you!
Hi , thanks for watching 🙂 you have alot of room to play , you can lay your pices on the ground and then see if you like the lay out , you can move them a little bit when u get to the last 4 feet and even if they are off by 3/4 an inch it's not noticeable because they are not the same hight.
Thanks for watching 🙂 I used 1 x3 rimmed MDF It's called 1x3 but the true measurements are 3/4 x 2 1/2 just like dimensional lumber that the actual measurements of a 2x4 is 1 1/2 x 3 1/2 inches.
Yes I used the No More Nail adhesive and then nailed it to make sure they never come off . I nailed the trim on areas that did not have any stud also. When you nail try to put each nail at a slightly different angel this way the nails pulls and hold the trim against the drywall.
yes for sure, just tape the trim down in a few spots so it stays in place while it dries up. If u do it on a wall that the other side is on the outside of the house I highly recommend nailling it. due to the weather, the boards may expand and contract too much and all ur seams may fall apart if it's not nailed.
Wow very detailed, thorough and beautiful work!
Thanks for the kind words and thanks for watching.
I been looking for this design I love it! What lengths did you use?
Thanks for watching. I used 8 foot long trim but I cut them. To the sizes that I explained in the video
Hello
Truly a very helpful video for the beginners. You explained well about all materials used. And very easy design to follow. Watched your video first time. Will now subscribe to your channel. Good work and good teaching skills 👍
One question pls: can you pls share the paint colour name. Thanks
Thanks for watching and the kind words 😊 welcome to the channel and I hope to have you as a returning viewer.
The painting was by wherein William and the colour name is called Big Chill, it's one of the best selling colours they have and I use this a lot for many of my projects, it's a very nice and modern colour. I also have other accent wall videos, if you are interested please be sure to watch them also, all the best 👍. 😊
please tell me what you think of this wall design?
Hi mate great look to the wall i have a small question what is your width size for each strip you cut
That's custom cut to the size of the opening.
@@renovationschool8818 no i mean how wide are the slats not the edge pieces the middles ones
@redcadillac01 hi
Oh I see
They are 1x3 MDF
@@renovationschool8818 1x3 inchs
@@redcadillac01 yes sir
Looks great! The flat sheen is scrubbable?
thank you 🙏
With the paint i used it is , yes
Thanks so much for the video! Question: after measuring the wall how do you make sure all the pieces fit evenly all the way across? I know you had 3” & 5” but how do you know how many pieces to fit across so there isn’t a giant gap once you get to the end? Thank you!
Hi , thanks for watching 🙂 you have alot of room to play , you can lay your pices on the ground and then see if you like the lay out , you can move them a little bit when u get to the last 4 feet and even if they are off by 3/4 an inch it's not noticeable because they are not the same hight.
@@renovationschool8818 oh makes sense thanks!
Beautiful work! What size trim did you use?
Thanks for watching 🙂
I used 1 x3 rimmed MDF
It's called 1x3 but the true measurements are 3/4 x 2 1/2 just like dimensional lumber that the actual measurements of a 2x4 is 1 1/2 x 3 1/2 inches.
If you don’t mind, did you get 10’ long trim and how much did you buy from store to do this project?
Yes I used 10 foot long trim and I remember I bought 20 and I think only used like 18 mesh.
I see that you used nail gun on non stud areas. Is it ok? I am trying to get a similar look but my studs are spaced far. Any solution?
Yes I used the No More Nail adhesive and then nailed it to make sure they never come off . I nailed the trim on areas that did not have any stud also.
When you nail try to put each nail at a slightly different angel this way the nails pulls and hold the trim against the drywall.
Can i only use the glue without nails ??
yes for sure, just tape the trim down in a few spots so it stays in place while it dries up.
If u do it on a wall that the other side is on the outside of the house I highly recommend nailling it. due to the weather, the boards may expand and contract too much and all ur seams may fall apart if it's not nailed.
Can you please link the trim you used?
Here is the link
It's 1x4 primed MDF
www.homedepot.com/p/FINISHED-ELEGANCE-1x4-11-16-in-x-3-3-4-in-MDF-Board-S4S-10001622/202738270
You didn't drop it on description what you using the product all!!! not helpful
What product exactly you want to know?