FULL VIDEO BUILD REVELL BEAUFIGHTER TF.X

Поделиться
HTML-код
  • Опубликовано: 25 ноя 2024

Комментарии • 282

  • @Torana-gz5ls
    @Torana-gz5ls 5 лет назад +7

    Beautiful aircraft. Was given the honour of of climbing inside and sitting in the cockpit of a nice one at Morrabin aviation museum in Victoria, Australia a few years back. Loved every minute of it. Could watch you airbrush all day, great job.

    • @ScaleModelAircraft
      @ScaleModelAircraft  5 лет назад +2

      Thank you! Btw, I have one in 72nd scale in famous Aussie markings. All the best! Dusan

  • @davidrendall7195
    @davidrendall7195 4 года назад +12

    Theres a lovely story in Hugh Pophams Sea Flight: His squadron were co-located on Orkney with a Beaufighter unit who had been writing off too many airframes with poor landings. The early Beaus had a high landing speed and nasty ground loop habit. The Beaufighter squadron leader asked for a test pilot or instructor to come up and give his men a good lesson. A few days later in poor weather a Beaufighter turns up overhead and makes a perfect three point landing. Assuming this was the expert pilot he had requested the whole squadron was turned out to watch and meet him as he taxied in. *That is how you land a Beaufighter!* berated the Sqdn Ldr *Pay attention and do everything he says!* Out of the cockpit climbs an attractive 5ft blonde female of the ATA diverted from a regular delivery run. According to Popham the Beaufighter boys were dumbstruck and their landings improved dramatically. Never seen someone put an ATA pilot climbing out of a WW2 model - would be different.

  • @vball818
    @vball818 5 лет назад +69

    Clicked "like" before watching the video, because I know its about to be a great build

    • @awkward14
      @awkward14 5 лет назад +3

      lol I did the same

    • @marcosmanke
      @marcosmanke 5 лет назад +1

      Very nice kit,excellent job!!

    • @Acheiropoietos
      @Acheiropoietos 5 лет назад +1

      Ditto.

    • @yeah-7544
      @yeah-7544 5 лет назад +1

      I did that too

    • @MAN394631
      @MAN394631 5 лет назад +1

      Hehehehe i did the same, as always at Dusan's builds

  • @Jaaoood
    @Jaaoood 5 лет назад +3

    A manly tear of Joy was shed... Its always a pleasure to watch your Videos Mr. Lekic! Thank you.

  • @JackFlemingFan1
    @JackFlemingFan1 5 лет назад +2

    Excellent video & job building your Revell Bristol Beaufighter TF.X!

  • @mbkmmodels9406
    @mbkmmodels9406 5 лет назад +1

    Nice work. I was an aircrafty fitter at Filton in Bristol and worked with a guy in the 80's who worked on these aicraft. The base of the gun turret was machined and was in two halfs that he used to gas weld toghether.

  • @wakemanedwards3450
    @wakemanedwards3450 5 лет назад

    Dusan IS a modeling ace ! I have learned so much from him watching his video's over the last couple of years.

  • @Getpojke
    @Getpojke 5 лет назад +4

    Beautiful build Sir. Due to ill health I've a bit of time on my hands and fancy getting back into model building after a thirty odd year hiatus. Have been watching RUclips to get an idea of how far the modelling scene has come in that time; a rather long way it seems. You're work really "pops-out" and I find just watching all these builds extremely relaxing, almost a "Zen" experience.
    I've always had a "thing" for WWII twin engine planes. The Bristol Beaufighter and de Havilland Mosquito being my all time favourites. They have that hunkered sense of power and purpose that you know will see them through most scraps & fights.
    I've subscribed and will be watching many more of your videos, thanks for the inspiration and joy your work brings.

  • @orangelion03
    @orangelion03 4 года назад +2

    Great build! Revell really hit the mark with this kit. Detail, engineering, price. Well done!

  • @opalprestonshirley1700
    @opalprestonshirley1700 5 лет назад +1

    Beautiful model. You do excellent work. Thanks.

  • @Mr229357
    @Mr229357 5 лет назад +1

    Nice work 👍🏻👍🏻👍🏻

  • @mr.modern4419
    @mr.modern4419 5 лет назад +2

    Fantastic build!! What a tough warbird the Beaufighter was!! Your technique is awesome!!!

  • @opalprestonshirley1700
    @opalprestonshirley1700 5 лет назад +3

    Fantastic job. I love the Beaufighter.

  • @wwkdiecastmore5647
    @wwkdiecastmore5647 5 лет назад +2

    Super nice build, great looking Beaufighter, thanks for letting us come along on the build!

  • @good2us1
    @good2us1 5 лет назад +1

    Great video and awesome build!!!

  • @VonRammsteyn
    @VonRammsteyn 5 лет назад +4

    Beautiful plane and amazing job! This is one of my favorites aircraft of the ww2!

  • @robbo1068
    @robbo1068 5 лет назад +2

    Another beautiful build and evidence of your modelling artistry. You make it look so easy and the OOB builds are just as powerful as those with lots of extras......can't wait to see what's next!!

  • @phayzyre1052
    @phayzyre1052 5 лет назад +1

    Another fine job, Dusan! 👍👍😎

  • @leokimvideo
    @leokimvideo 2 года назад

    Remember the very early RUclips aircraft modeling fan Basic Modeling. It's weird I can no longer find him on the site. Ihope he hasn't passed away

  • @brianrussell9223
    @brianrussell9223 5 лет назад +1

    Nice build 👍

  • @rickyweird01
    @rickyweird01 3 года назад

    Thank you for your build, looks fantastic, I’ve returned to modelling after 35 years and I’m waiting delivery of this exact kit, as it’s my third build I don’t think it will be anything like your skill level but I will be using yours as a reference, really appreciate your video 👍

  • @fleetwarrior75
    @fleetwarrior75 5 лет назад +26

    I no longer build models, I watch you do it instead!

  • @anjkovo2138
    @anjkovo2138 5 лет назад +1

    Superb. You're an Artist

  • @38dragoon38
    @38dragoon38 2 года назад

    I really enjoy these videos. The music is hypnotic!

  • @ElMezko
    @ElMezko 4 года назад +1

    Love your build videos ! Thanks for all the tips. It’s like a meditation session for the viewer that I am 🙏🏻

    • @ScaleModelAircraft
      @ScaleModelAircraft  4 года назад +1

      Thank you very much for your kind words! All the best!! Dusan

    • @ElMezko
      @ElMezko 4 года назад +1

      ScaleModelAircraft Thank YOU !
      I’m gonna use your Corsair 1D video as template ;)

  • @melmoore6885
    @melmoore6885 5 лет назад +2

    Fabulous build OOB Dusan, i keep watching and learning, thank you for posting.

  • @petkovskin2620
    @petkovskin2620 5 лет назад +4

    Konačno, čekam novi klip k'o ovo sunčano vreme... odlično !!

  • @TParkcasual
    @TParkcasual 5 лет назад +2

    Beautiful RAF Beaufighter with the invasion stripes, well done m8!

  • @robertpendergast2620
    @robertpendergast2620 5 лет назад +1

    Beautiful work; outstanding explanation!

  • @MrNemo721
    @MrNemo721 5 лет назад +4

    Amazingly detailed build and it was so relaxing to watch as well!

  • @marcosmanke
    @marcosmanke 5 лет назад +2

    Very nice kit,excellent job!!👍👌

  • @osmes84
    @osmes84 5 лет назад +9

    Und wieder einmal, ein perfektes Modell 👍💪
    Vielen Dank dafür. Es macht Laune, dabei zu zusehen 👍

    • @f-4ephantomll271
      @f-4ephantomll271 5 лет назад +1

      Ja man denkt immer so jetzt krieg ich das auch hin, aber man schafft es nie, deshalb habe ich ich damit aufgehört, weil ich nie ein perfektes Ergebnis hatte deshalb sammle ich hobbymaster Modelle im 1/72 Maßstab :)

  • @paulmcwilliams1709
    @paulmcwilliams1709 5 лет назад +2

    A very nice kit!

  • @finndamage
    @finndamage 4 года назад

    Love it. Just perfect. Not over or under weathered. Nailed it.

  • @raytheron
    @raytheron 5 лет назад +5

    This is a superb build of a beautiful plane, one of my favourites. The kit actually looks better than the Tamiya one I built last year!

  • @robtompkins1844
    @robtompkins1844 4 года назад

    It's a pleasure to watch you work. Another amazing build! I'll be purchasing this one!

  • @orangelion03
    @orangelion03 5 лет назад +4

    Great kit and excellent build! Video skills match your modeling skills. I really do hate Revell boxes though (I realize it helps keep the cost down, and adds to the value-for-money of their kits). I have NEVER built one model at a time, some are built over long periods of time, and it is nice to have a proper box to store the partial built sub-assemblies etc. I have purchased flip top storage boxes for several of my Revell builds and re-use them when completed.

  • @bearbergmann2782
    @bearbergmann2782 5 лет назад +2

    Looks like a great kit and well done!

  • @JimBeergr
    @JimBeergr 5 лет назад +2

    What a way to wake up !!! Another great video.

  • @seantaylor4313
    @seantaylor4313 5 лет назад +1

    Very satisfying to watch,good job 👍

  • @meltz87
    @meltz87 5 лет назад +6

    Nicely done! I really liked the paint scheme and the amount of detail you put into the interior even though nobody will see it besides us, very cool.

  • @francesluck6597
    @francesluck6597 5 лет назад +2

    Superb build!

  • @mihaiciubotariu702
    @mihaiciubotariu702 5 лет назад +1

    Beautiful plane and model !!!

  • @carmenlatoja206
    @carmenlatoja206 5 лет назад +3

    Your videos inspire me to improve my models. A great job, as always

  • @charliebowman785
    @charliebowman785 Год назад

    The excellent outstanding molding corresponds to ICM. I just made a 1/32 Stearman PT17 by ICM/Revell and everything about the quality of pieces was beyond my expectations. I widely recommend ICM; won't let you down.

  • @stuartbremner9680
    @stuartbremner9680 5 лет назад +2

    Stunning build yet again 😃👍

  • @ozpopjazz
    @ozpopjazz 5 лет назад +1

    Looks perfect, great work!

  • @joseluiscastanorestrepo
    @joseluiscastanorestrepo 3 года назад

    Great work, magnificent plane.

  • @MAN394631
    @MAN394631 5 лет назад +3

    Again outstanding work from you Dusan, the build, the paint job and the weathering job are amazing, stunning

  • @allencruce78
    @allencruce78 5 лет назад +4

    Ah Dusan! I’ve missed seeing your work. Another brilliant execution!

  • @renatoigmed
    @renatoigmed 5 лет назад +4

    so many parts hidden details inside ... I would leave open the engine hood at least. great work great art.

  • @andrewmarsden1970
    @andrewmarsden1970 5 лет назад +2

    Lovely work.

  • @tigertanktoo
    @tigertanktoo 5 лет назад +2

    That was a very nice looking Beaufighter. I enjoyed watching this. Thank you for sharing.

  • @draginfly3000
    @draginfly3000 5 лет назад +1

    Great job.

  • @iamagoblin
    @iamagoblin 5 лет назад +2

    very good to watch, thank you.

  • @sjcsjc1378
    @sjcsjc1378 5 лет назад +2

    Great to watch, enjoyed the soundtrack choice and loved the build. Many thanks for posting :-)

  • @DaiElsan
    @DaiElsan 5 лет назад +1

    Great build

  • @SprueFascinationChannel
    @SprueFascinationChannel 5 лет назад +1

    Perfekcija Dušane 👍

  • @francky_4524
    @francky_4524 4 года назад

    👏🏻👏🏻👏🏻 I m gonna use your video to build my own Beaufighter... beautiful job 👌

  • @danielwilliams3994
    @danielwilliams3994 5 лет назад +2

    Excellent build as always. Thank you Dusan. I bought my beast from a retailer in the UK via Amazon. Apparently Revell doesn't sell kits in the USA anymore. I can't wait to see your build of the Revell 1/32 f/a-18e . If and when it ever comes out.

    • @ScaleModelAircraft
      @ScaleModelAircraft  5 лет назад

      Thank you! Btw, wierd I haven’t seen super hornet at my local store... All the best! Dusan

    • @bennettrogers7921
      @bennettrogers7921 5 лет назад

      Daniel Williams I believe that Revell and Revell of Germany still sell kits it the USA. I just bought a couple.

  • @sutt16v
    @sutt16v 5 лет назад +1

    I like your idea of showing previous codings on the fuselage. Nice touch.

  • @1955superchevy
    @1955superchevy 5 лет назад +2

    Very nice indeed your videos always inspire me

  • @ashleycurran2217
    @ashleycurran2217 4 года назад +1

    Hi! Love your work. Are you considering doing an airbrushing tutorial!? You make it look so easy

  • @ja37d-34
    @ja37d-34 2 года назад

    Building the tamiya Mk. VI right now, and I really like it! So much I ordered a Mk. X too.. This seems alright as well however.
    Great job on it.

  • @majiclamp4857
    @majiclamp4857 4 года назад

    I like clean look models. But I also enjoy adding weathering and dammage to certain models. It's on how I feel from kit to kit.

  • @alexhandzhiev
    @alexhandzhiev 5 лет назад +1

    So beautiful. I cried.

  • @Miguel-re2hv
    @Miguel-re2hv 4 года назад +1

    Excellent! Some time you may include in the vid how you make the antenna. Thank you

  • @ichmalealsobinich
    @ichmalealsobinich 3 года назад +1

    I think for such a huge model Revell could also have to offer details for the 4 20mm Hispano Suiza cannons.

  • @davidtodd6086
    @davidtodd6086 4 года назад +1

    In a future video can you comment on your airbrush and technique? It looks so easy, but for me it is difficult to get the results that you accomplish. Thanks

  • @Adamslee72
    @Adamslee72 5 лет назад +3

    Great to see another build Dusan this was brilliant to see the new beaufighter from Revell thanks for sharing cheers 😁👍🏻

  • @sergiogamboa6472
    @sergiogamboa6472 5 лет назад +5

    Es realmente hermoso, bello e increíble ...desde luego digno de un concurso...gracias por compartirnos ...

  • @TimsScaleModelling
    @TimsScaleModelling 5 лет назад +2

    Really well put together Dusan, love the Beau. Have shared on my Facebook group 👍

  • @Odinkarr
    @Odinkarr 5 лет назад +2

    It’s really cool seeing how you constantly improve with each build. Great stuff!!!
    Keep up the good work brother!

  • @rezaadrian20
    @rezaadrian20 5 лет назад +2

    Excellent job, so beauty

  • @FreakazoidakaBen
    @FreakazoidakaBen 5 лет назад +2

    Great Job Dusan👌👍!! Wonderful OOTB Build.

  • @lindjeborec7272
    @lindjeborec7272 5 лет назад +1

    Tohle miluju ta přesnost nejradeji mám nejradši když mi pomalu roste ten model před očima

  • @MilPlanes1
    @MilPlanes1 5 лет назад +1

    Stunning work dude!

  • @martinradcliffe4798
    @martinradcliffe4798 5 лет назад

    Hugely impressive build!

  • @vincentmah3906
    @vincentmah3906 5 лет назад +2

    Great video again. Nicely done! It's astonishing how you manage to keep your gloves clean from paint :D

  • @bruceghent8776
    @bruceghent8776 4 года назад

    Magnificent job!

  • @robertwallace4928
    @robertwallace4928 5 лет назад +3

    Love the videos but that hobby shop in the beginning makes me so jealous!

  • @TheNutter44
    @TheNutter44 5 лет назад +2

    That was so cool bro I missed the full build videos please keep them coming dude looking forward to your next video.

  • @epiceli04
    @epiceli04 5 лет назад +6

    Absolutely Fabulous! Thanks for uploading. :)

  • @TrueBlueYou
    @TrueBlueYou Год назад

    Outstanding job!!!!!

  • @DavidTurner1
    @DavidTurner1 5 лет назад +1

    First of all, your craftsmanship and artistry are of a superior level. In my youth, I used to participate in local IPMS modeling meetings and contests. So, I have some experience and appreciation of scale modeling.
    Anyway, I was a little curious about your thoughts and practices in scaling values and saturation of colors when it comes to the painting of your models. And by the way, I think that you painting skill and approach are very artful.
    In other words, if you are viewing a model in 1/48th scale, it would be like viewing an actual aircraft from several feet away. Therefore, considering the effect of atmospheric perspective, colors would be less saturated and value contrast would not be as great. For example, the invasion stripes at this scale would not black and white, but would be very dark gray (almost black) and very light gray (almost white)..
    Please let me know your thoughts and keep up the great artistry!
    Regards,
    -DT

  • @hbladeh
    @hbladeh 5 лет назад +6

    Excellent build Dusan. The ambient music selection is excellent, when I heared the one starting at 6:35, I was like... ooooyeah the good old "Dusan music" :D This whole magic drops the blood pressure with approx 30... Great build, great video... Keep going with the builds :) (Y)
    P.S.: It's jet time soon :P

  • @bobdyer422
    @bobdyer422 5 лет назад +1

    Two piece wheels? Not even weighted? Nice detail painting for the pit. I have to laugh, my Dad gave me a set of pin vise drill 30yrs. ago. Never really had much use for them, until I started to build models. Can't live without them now! Nice looking engines, pretty good detail throughout. Excellent OOB build, beautiful weathering! Congrats!

  • @jeffreyross-zb8cz
    @jeffreyross-zb8cz Месяц назад

    Great Job My Friend. "DETROIT"

  • @jurgenerikalex-hiron5167
    @jurgenerikalex-hiron5167 5 лет назад +1

    Nice subtle weathering

  • @alansimmonds9651
    @alansimmonds9651 5 лет назад

    A really nice build and video.

  • @strikeeaglemodels1588
    @strikeeaglemodels1588 5 лет назад +2

    Great video! Turned out fantastic.Loving the tonal variation 🍻👍

  • @josealejandroalvaradobotei8584
    @josealejandroalvaradobotei8584 4 года назад

    Excelente video desde Chile abrazo me encanta los aviones el aeromodelismo gran trabajo 👍👍👍

  • @marcusjanura1867
    @marcusjanura1867 4 года назад

    Super model krásné zpracován👍

  • @MrMarcocamp
    @MrMarcocamp 5 лет назад +1

    Fantastic built. Quick question: during the last highlight and fading step, do you spray air over the applied wash?

  • @bojanbokic4991
    @bojanbokic4991 5 лет назад +2

    Bravo Duleeeee!

  • @jacekbrylka8837
    @jacekbrylka8837 3 года назад

    Perfect ! clean model Congr!

  • @ModellingWeekly
    @ModellingWeekly 5 лет назад +1

    loved this video format - subbed! great work!

  • @lucasromanow1688
    @lucasromanow1688 5 лет назад +1

    excellent work !, that you use to dilute the color Aqua paint ?, I also use it with my airbrush, but I have problems to paint, it leaves the surface a bit rough and I can not make fine lines !. Greetings from Argentina!

  • @daxroman
    @daxroman 5 лет назад +1

    Excellent work. What is the reference of the flexible ruler used as a guide to line engraver?

    • @ScaleModelAircraft
      @ScaleModelAircraft  5 лет назад

      Hasegawa tool, as I recall try tool TL1 or something like that. Thanks!! All the best! Dusan

  • @robertovella528
    @robertovella528 Год назад

    Come sempre il msestro non sbaglia 😊 spettacolare