Air Lift Wireless ONE Install On A Ram 2500

Поделиться
HTML-код
  • Опубликовано: 28 сен 2024
  • Today I install a wireless airlift 74000ez system on my Ram 2500. Here is a link to the Wireless system.
    As an Amazon Associate I earn from qualifying purchases.
    Air Lift Wireless
    amzn.to/3KUlqcM

Комментарии • 36

  • @bjnava2062
    @bjnava2062 5 месяцев назад

    Where did you run your ground wire?

    • @EverydayMan
      @EverydayMan  5 месяцев назад

      A bolt under the seat.

  • @TheDubv22
    @TheDubv22 Год назад +1

    Have you experienced any issues with the compressor being under the rear seat, such as overheating? I like the idea to preserve the compressor from the elements, but every other install I’ve seen was outside the truck. Thanks.

    • @EverydayMan
      @EverydayMan  Год назад +1

      No I never had issues with it.

  • @ChronicSurfer
    @ChronicSurfer 2 года назад +1

    Looking at this same kit for my 3rd gen 3500. Might have to do the one that is not 'EZ' to fit under my seat. Thanks for the info.

    • @EverydayMan
      @EverydayMan  2 года назад +1

      It works well. I've bought a dually and eventually I'll put it on the dually too.

  • @kikojofraserrano
    @kikojofraserrano 7 месяцев назад +1

    Very nice feature.

  • @lydellboone2218
    @lydellboone2218 Год назад

    Good morning Sir. Do you have a video of how you installed your sub in you ram truck?

  • @CTIScentralFL
    @CTIScentralFL Год назад +1

    Thanks for sharing brother

  • @viciomaple
    @viciomaple 2 года назад +1

    You can use this kit for four wheels at same time or u need use 2 kits?

    • @EverydayMan
      @EverydayMan  2 года назад

      It's a 2 path compressor. It can be used for multiple bags. It could be front and rear. The remote says left and right, but it can be plumed how you want.

  • @seanotoole3542
    @seanotoole3542 Год назад +1

    Thank you for taking your time to make this video. I just installed the same airbags today and wanted to install compressor in my cab. After seeing your video, I'm going to use the storage location you used. I plan on using dual pass and keep 2 Schrader valves going under rear tailgate in case the compressor goes bad on any trip i take. I live where snow can buildup under truck

  • @kylefoster4623
    @kylefoster4623 2 года назад

    Where did you run the ground to?

  • @jacrancam
    @jacrancam Год назад

    Did you find out why your bag went flat?

  • @nunyobizkneez
    @nunyobizkneez 11 месяцев назад +1

    thanks for sharing this video! I was wondering if that ez mount would fit under the driver back seat. Glad to see that it does. What plug did you take out? My 2021 2500 has two plugs under that back driver seat. One round and one oval. Did you run into any issues with the ez mount getting in the way of running wires and air line through the plug hole?

    • @EverydayMan
      @EverydayMan  11 месяцев назад +1

      I think the oval one. No issues.

  • @randylester1219
    @randylester1219 2 года назад +1

    Great content, thanks for sharing. Wondering what you spent total on the system bags and compressor unit? And if you compared the Viaire system as well? I have the same truck and have considered putting Air bags in my truck, but also want to have a quick connect on the rear bumper for airing up trailer tires, tools, etc.

    • @EverydayMan
      @EverydayMan  2 года назад +1

      I've got right at 1000 bucks with the compressor and bags. I haven't tried any other system. I don't know if the compressor will have enough of a duty cycle to fill up tires. But it would be worth trying. Thanks for watching!

  • @swat645
    @swat645 Год назад

    When you mounted your Wireless One compressor under the seat in the storage compartment did you hard mount it or just let it lay loose?

    • @EverydayMan
      @EverydayMan  Год назад +1

      I just let it lay. It fits snug in there.

  • @ethanbaker9905
    @ethanbaker9905 Год назад

    how did you pop that plug for the hole under the truck ?

    • @EverydayMan
      @EverydayMan  Год назад

      It's a plastic plug.

    • @ethanbaker9905
      @ethanbaker9905 Год назад

      @@EverydayMan mine doesn’t want to budge at all.

    • @EverydayMan
      @EverydayMan  Год назад

      @@ethanbaker9905 drill a hole in yhe plastic.

  • @bryansorenson486
    @bryansorenson486 2 года назад

    In the fuse box what color was the wire you hooked into

    • @EverydayMan
      @EverydayMan  2 года назад

      I connected it to a fuse that stayed hot. I don't remember witch on it was.

    • @bryansorenson486
      @bryansorenson486 2 года назад +1

      Thanks I ended up ordering a micro add a fuse

  • @demoll78
    @demoll78 2 года назад

    How you get a 4 ton unit to run on that size generator

    • @EverydayMan
      @EverydayMan  2 года назад

      Start the ac before anything else.

  • @JamesBond-uj8mz
    @JamesBond-uj8mz 2 года назад

    Most of the time you were standing in front of the work you were doing which made it impossible to see perhaps you could stand in front of all of it so that we can't see anything at all. Terrific video unless you want to learn or see something

    • @EverydayMan
      @EverydayMan  2 года назад +2

      Sorry you found it unacceptable.