Love this video! I've been trying to figure out the ignition harness wiring on my 03 Subaru Baja for a while now. I do have 1 question: on my Compustar 925S it has a negative parking light output but my Baja parking light input is positive. How do I fix that?
Let me check that because my brake light diagram said it was positive but it wasn’t I had to use a test light to find out, put the test light clip on any metal surface and then pinch the cable if the light, turn on in the test light means it’s really positive as you said but if it doesn’t then mean it’s negative any way let me take a look to that compustar and I will let you know ones if find out to be on the safe side.
The installation was made on automatic with a manual transmission the process will change because you can’t leave the car on neutral, but the device work of that I’m sure you only need to find out how to work with the fact the the car is on 1st speed when is parked
There was a website call bulldog security but I think is not available anymore the best shot is buy a copy of the car service manual on eBay that cost around $12 or find the Subaru forester 2001 free pdf service manual online
What I did is use a razor blade and carefully cut an inch of the plastic that cover the cable be careful don cut the wire, watch this video as a reference ruclips.net/video/Cmj3ObDH-e0/видео.html
Good job amigo. English is obviously your 2nd language and you did a great job communicating clearly and efficiently. Very helpful
Love this video! I've been trying to figure out the ignition harness wiring on my 03 Subaru Baja for a while now. I do have 1 question: on my Compustar 925S it has a negative parking light output but my Baja parking light input is positive. How do I fix that?
Let me check that because my brake light diagram said it was positive but it wasn’t I had to use a test light to find out, put the test light clip on any metal surface and then pinch the cable if the light, turn on in the test light means it’s really positive as you said but if it doesn’t then mean it’s negative any way let me take a look to that compustar and I will let you know ones if find out to be on the safe side.
Ok thank you! My brake one is good, its my parking(flashing) lights thats negative.
Ok in the brain of your compustar there must be a switch or a jumper that you can change the setting for negative parking flashing lights
Does this work with manual trans
The installation was made on automatic with a manual transmission the process will change because you can’t leave the car on neutral, but the device work of that I’m sure you only need to find out how to work with the fact the the car is on 1st speed when is parked
where can i download the wiring installation manual ?
There was a website call bulldog security but I think is not available anymore the best shot is buy a copy of the car service manual on eBay that cost around $12 or find the Subaru forester 2001 free pdf service manual online
subaruport.ru/for1/for_01_gen.pdf
How do you splice the wires ?
What I did is use a razor blade and carefully cut an inch of the plastic that cover the cable be careful don cut the wire, watch this video as a reference ruclips.net/video/Cmj3ObDH-e0/видео.html
Did you use a bypass module?
No I didn’t have to use a bypass module, the bypass only is needed when the car already comes with an in mobilizer
@@Videspro How about 2009 Forester? Is there a possibility to install the remote start without the bypass module?
Didn't need to use any relays?
None