DIY starry sky projection night light
HTML-код
- Опубликовано: 26 июн 2020
- Step 1:Tear off all the protective film of the iampshade（You will find that there is a thin layer of PVC that needs to be removed.）
Step 2: The iampshade is folded inward from the smooth facing surface （Film according to crease (texture)）
Step 3: The upper,middle and lower three shades correspond to the fastening
After folding the three-part film, it is these pictures, see the picture.
There are very thin gaps on the edges of the film, so that they are fastened
Step 4: Bottom 45 degrees into the iampshade
Step 5: Bottom and lamp cover fastened
спасибо, брат. очень классно.
thank you)
Smooth on the outside
I bought this article, but when I assembled it and tried to connect it didn't work, I put it to charge for a while, but I don't know how to connect! Can you explain to me how to connect?
Если вы купили версию Bluetooth
1. Включите Bluetooth на мобильном телефоне, а затем выполните поиск «playhion», чтобы подключиться к Bluetooth. После подключения вы можете запустить Bluetooth, чтобы воспроизвести музыкальное меню вашего мобильного телефона.
Источник питания USB или зарядка, индикатор горит красным
После полной зарядки USB-накопителя он горит зеленым,
Время зарядки составляет около 3 часов, а время использования - около 4-10 часов, в зависимости от ситуации.
Свет звездного неба находится на клавише, короткое нажатие - «включено» и «выключено», длительное нажатие около 2 секунд для переключения на следующий цвет.
AMAZING :)
AMAZING :)
Does it turn? Or spin
It has 10 variants, choose the remote control version and the Bluetooth version, it can be rotated, and the Bluetooth version can also play your mobile music
It will rotate, to choose the Bluetooth version, or the remote control version, it has 10 versions.
This is exasperating. Everytime I try to connect the top piece it comes apart!
It's difficult but persevere until you hear the little click when the tab is finally locked in. Mine came without a remote so I can't make it rotate unfortunately. They said something about making it rotate somehow with Bluetooth?
There are 10 versions, including the Bluetooth version and the remote control version. Bluetooth can connect the mobile phone to play music, but the remote control version cannot connect the mobile phone.
Can someone tell me how I can make it rotate using Bluetooth?
You can connect your mobile phone through Bluetooth and play the music in your mobile phone. With a remote control, you can control rotation, sound and light.
Step 1:Tear off all the protective film of the iampshade（You will find that there is a thin layer of PVC that needs to be removed.）
Step 2: The iampshade is folded inward from the smooth facing surface （Film according to crease (texture)）
Step 3: The upper,middle and lower three shades correspond to the fastening
After folding the three-part film, it is these pictures, see the picture.
There are very thin gaps on the edges of the film, so that they are fastened
Step 4: Bottom 45 degrees into the iampshade
Step 5: Bottom and lamp cover fastened
Is the smooth face on the inside?
@@Slingsbys did u figure it out so u cld tell me. That's all I needed to know if smooth is inside or outside. I think outside but hey it's 50/50🤣
Flash Deals - Rush to buy the Russian delegation of investment promotion in a limited time at 10:00 on September 16~
There will be a super discount of 90% off in Russia today, and you can take away a lamp for only about $1. Please follow this activity and collect this product
www.aliexpress.com/item/2255800663689603.html?spm=5261.ProductManageOnline.0.0.1fbf4edfQY7tId&gatewayAdapt=4itemAdapt
US $6.00 off, use D6OOOB27WJSO
US $5.00 off on US $25.00
www.aliexpress.com/item/4000405501093.html?spm=a2g0o.store_pc_topSellerIng.8148356.2.37a63f0dVtsOBP
www.aliexpress.com/item/4000405501093.html
Order dishes can be viewed here