The reason the board is upside down is for that flex you felt while riding it. This used to be a big part of skateboarding in the 60s and is why there was companies like Fiberflex and Powerflex. It's all but a lost art in skateboarding now. As you turn try to get the board to flex as much as possible. The more it flexes the tighter you will turn. A good board has a good ratio between flex and rebound. This becomes sort of a game. You get the most flex by putting your weight in the center of the board but at the same time it's the hardest place to balance. So the trick is to find a stance that maximizes flex and keeps your balance. There's an old photo of Skip Frye flexing a board hard in a Gordan and Smith skateboarding ad that's a good example. It's cool that Niel Blender has brought back this aspect of skateboarding. Also cool to see you building polarizers.
All you did was take a normal skateboard and sharp the end of the nose, then turn it upside down and apply grip tape on the bottom. I've made one.. yes they turn quick.
Beautiful setup! Very good idea with the thin “Nuts 4 You” nut…and using the 6 washers to increase width! Great Work! I am stoked that I found this channel!!!😊
![[FESN laboratory] #010 Sure Grip トラック TAKAHIRO MORITA x Liu Puli SKATE SESSION (ENGLISH SUB)](http://i.ytimg.com/vi/xklDRp5RQ_g/mqdefault.jpg)
![[FESN laboratory] #010 Sure Grip トラック TAKAHIRO MORITA x Liu Puli SKATE SESSION (ENGLISH SUB)](/img/tr.png)
![[FESN laboratory] #008 Sure Grip トラック part.3 (ENGLISH SUB)](/img/1.gif)
本当に発想豊かすぎですね。サーフボードの今のパフォーマンスボードでも ほとんどのデッキはラウンドしてますもんね。ライダーの方の乗った時の感想がつたわってくるし、鋭角のターンをしたくなる理由が 伝わってきますね。
The reason the board is upside down is for that flex you felt while riding it. This used to be a big part of skateboarding in the 60s and is why there was companies like Fiberflex and Powerflex. It's all but a lost art in skateboarding now. As you turn try to get the board to flex as much as possible. The more it flexes the tighter you will turn. A good board has a good ratio between flex and rebound. This becomes sort of a game. You get the most flex by putting your weight in the center of the board but at the same time it's the hardest place to balance. So the trick is to find a stance that maximizes flex and keeps your balance. There's an old photo of Skip Frye flexing a board hard in a Gordan and Smith skateboarding ad that's a good example. It's cool that Niel Blender has brought back this aspect of skateboarding. Also cool to see you building polarizers.
thanks for posting that I love to learn skate history
このチャンネル見てると、新しいスケボーどんどん欲しくなる😂
All you did was take a normal skateboard and sharp the end of the nose, then turn it upside down and apply grip tape on the bottom.
I've made one.. yes they turn quick.
Beautiful setup!
Very good idea with the thin “Nuts 4 You” nut…and using the 6 washers to increase width!
Great Work!
I am stoked that I found this channel!!!😊
sure gripを買ったタイミングだったので、思わずストリートデッキからポラライザー作っちゃいました！
カッコ良すぎ！パーク見たい！そして欲しい！そして買いたい！
あーたまらんです。脳みそからヨダレがでる…。
best polarizer video I've found- thanks! 🤙
Liu Puliさんクルージングお上手ですね
ニールブレンダーのデッキ個人的に衝撃受けました。話し変わりますけどドラボンさんの布グリップテープと森田さんのハンガーにローラー付いたトラックもかなり衝撃受けました
細小さいボードかっこいいっです。ただ、慣れれば問題ないでしょうけど安定感が玄人寄りな気も。
板の強度さえ持てば、この幅で比率的にはロングボードみたいな形状とかも見てみたい。初心者向きで安定感あって、本体の重量アップで加速後の速度の持続性も高かったりしないかな？
等々、妄想が膨らみますw
いつも楽しいスケボーの話題ありがとうございます。
いや、見直してると既にかなりトラックの距離長いですねぇw
ロングボードに興味があるので刺ささります。
Hi, where i can buy the sure grip polarizer complete skateboard online in Italy or Europe please?
メッチャ乗ってみたい！
完成品でポラライザー欲しい！
The trucks are on the wrong side and the grip tape is on the wrong side that board is upside down....😮
I wish the axls had less thread, i hate the idea of bearings restinf on there spinning
撓ってギュンギュン‼️
このウィールの名前ってわかる方いますか？不整地に強そう、、、
ここスケボー禁止の看板？がありますけど注意されないんですか？
中野駅付近でスケボー練習しやすいとこ探してて…