Great video!! More rebuild/restoration videos. I love the old bburagos. Lots of detail for the money . A little paint work and they look great. As for color how about a semi gloss black?? Excited to see the next video. Keep them coming Chris!
Great tutorial! I've got the HWE F40 and the passenger's side door keeps falling. I do try to clip it in but when I open it, again it falls off. Any tips on how to fix it properly? Thanks! - Vince
Eurovision Euphoria! Hi thanks for your comments, with regards to your Hotwheels elite I wish I had one of though , it’s possible that the screw behind the door card that mine need tightening up which may be very difficult to get to without taking the model apart not 100% certain I don’t have the hot wheels in front of me to give you 100% correct advice I will have to check but generally he is normally a screw holding the door card in place 👍🏻👍🏻🚗🚗
@@CSdiecasttuning Thank you for your reply. HWE doors to the F40 do not have any screws, that's the problem. They have a metal plate fixed to the door that clicks in a few notches to the model. I believe one of the plates have bent a bit thus making it lose, not sure though.
Eurovision Euphoria! Hi doesn’t sound good looks like the only way would be to bend it very slightly I have just the ordinary Hot Wheels F40 must have a look and get back to you 👍🏻
Hi , the best place to get the parts are on eBay just search 1:18 spares parts , or try Facebook group for model parts there are a few people that trade parts 👍🏻👍🏻
Hi man ! Do you have any experience with disassembling any model from " Polistil "manufacturer ? Ive just bought F40 1/18 from a guy but disassamble looks like a big isue.
Hi there, sorry never had one of these models in my possession, generally the screws are hidden in the arches if you can’t see them on the base plate 👍🏻
Hi I really hope u can help me.... I was lucky enough to inherit 8 Burrago Ferraris nothing as clean as what u come across..... Basically every damage that is common I've got... I'm trying to restore a F40... An so much is damaged I've managed to repair the front suspension.. But I've having trouble aligning the front bonet/bumper....if u could maybe help me out with even images so I know where to begin..... Thanks your tutorials helped me restore 2 others
Shiraz Domingo hi thanks for your comments I think there are are only two that hold the bonnet and bumper together they both rap around a cross member bar at front end of chassis, once both parts are fitted over this then screw them down from underside . 💯💯🚗🚗🚗
@@CSdiecasttuning hi I'd like to thank you for replying to me... I came across another Burrago F40... I think I got carried away with this one...... I know u all about keeping it original an mint.... I would love to get your output
Caleb Richard yeah your right you have to keep an eye out they do come up from time to time in the states & uk an europe but not as much as china’s one ☝️ thanks for your inquiry
CS.diecast tuning I’m about to receive a burago f40 like you did! I’m gonna take my time to mod it. Trying to find a new hobby. All I do is work I drive a semi truck for a living!!!
Great video!! More rebuild/restoration videos. I love the old bburagos. Lots of detail for the money . A little paint work and they look great. As for color how about a semi gloss black?? Excited to see the next video. Keep them coming Chris!
Hi thanks very much looking forward to this one ,👍🏻👍🏻will have a lot of internal detailing to do 👌
Gloss black for sure!
william SULLY yeah the more I think about it the more I’m leaning towards the gloss 👍🏻👍🏻
Gloss for sure.
I took apart the F40's predecessor, the 288 GTO, while I was repainting it. It was a lot easier. The F40 looks so complicated.
Hi , yeah if40 is a bit fiddly and fragile but it Worth it when it’s done 👍🏻💯
Nice to know, because actually I'd like to know how to remove wheels from their pin
Gold wheels on the red f40 would be amazing
Great tutorial! I've got the HWE F40 and the passenger's side door keeps falling. I do try to clip it in but when I open it, again it falls off. Any tips on how to fix it properly? Thanks! - Vince
Eurovision Euphoria! Hi thanks for your comments, with regards to your Hotwheels elite I wish I had one of though , it’s possible that the screw behind the door card that mine need tightening up which may be very difficult to get to without taking the model apart not 100% certain I don’t have the hot wheels in front of me to give you 100% correct advice I will have to check but generally he is normally a screw holding the door card in place 👍🏻👍🏻🚗🚗
@@CSdiecasttuning Thank you for your reply. HWE doors to the F40 do not have any screws, that's the problem. They have a metal plate fixed to the door that clicks in a few notches to the model. I believe one of the plates have bent a bit thus making it lose, not sure though.
Eurovision Euphoria! Hi doesn’t sound good looks like the only way would be to bend it very slightly I have just the ordinary Hot Wheels F40 must have a look and get back to you 👍🏻
@@CSdiecasttuning Yes thank you. Maybe, which I have no doubt, the sort of hinges are the same from the HWE to the HW version
Good evening, I am repairing a burago f40, where can I get the front axle and guides? Thanks for your support
Hi , the best place to get the parts are on eBay just search 1:18 spares parts , or try Facebook group for model parts there are a few people that trade parts 👍🏻👍🏻
@@CSdiecasttuning Thank you very much, I will look for the parts that I am missing
Hi man ! Do you have any experience with disassembling any model from " Polistil "manufacturer ? Ive just bought F40 1/18 from a guy but disassamble looks like a big isue.
Hi there, sorry never had one of these models in my possession, generally the screws are hidden in the arches if you can’t see them on the base plate 👍🏻
Hi I really hope u can help me.... I was lucky enough to inherit 8 Burrago Ferraris nothing as clean as what u come across..... Basically every damage that is common I've got... I'm trying to restore a F40... An so much is damaged I've managed to repair the front suspension.. But I've having trouble aligning the front bonet/bumper....if u could maybe help me out with even images so I know where to begin..... Thanks your tutorials helped me restore 2 others
Shiraz Domingo hi thanks for your comments I think there are are only two that hold the bonnet and bumper together they both rap around a cross member bar at front end of chassis, once both parts are fitted over this then screw them down from underside .
💯💯🚗🚗🚗
@@CSdiecasttuning hi I'd like to thank you for replying to me... I came across another Burrago F40... I think I got carried away with this one...... I know u all about keeping it original an mint.... I would love to get your output
Shiraz Domingo lets see what it like curious what you have created 👍🏻💯
Working progress
I guess I'm very sloppy with my workmanship....i like to fabricate parts with with ever i have in the house
Where can you get the Ferrari decals? I tried on eBay but it’s in China any in the United States?
Caleb Richard yeah your right you have to keep an eye out they do come up from time to time in the states & uk an europe but not as much as china’s one ☝️ thanks for your inquiry
CS.diecast tuning I’m about to receive a burago f40 like you did! I’m gonna take my time to mod it. Trying to find a new hobby. All I do is work I drive a semi truck for a living!!!
I got mine from China
I mean the front suspension, it broke on one side
I perfer gloss. Black