Bro u could have all the lights independent using my dongle,just connect an HC05 to each light with its own mcu and have as many independent lights around your house as you want, btw where you from bro
if i go outside my house , and i forgot to switch off the light..can i switch off the light using the Arduino IOT remote mobile app even at outside the house?
Arduino cloud provides its own web app . And it’s very handy to use. You can check my “getting started with esp32 “ video where I have created custom app . 👍🏻
@@hashincludeelectronics you can also do it within a android application so you can control the bluetooth devices connected to the phone via a web page thats connected to the same network as the phone whether your on wifi or hot spotting
Bro just asking .. what will i input on the ssid and password is that the ssid of the wifi im using in our home?? And where i can get the device secret key?? I hope youll help me with the.. thank you bro.
Thanks for checking out video 👌🏻. Yes it’s the same WiFi ssid password which you use at home. Regarding getting device secrete key , it’s explained in the video . You can get it when you add the device.
@@dipaksonone2917 once you create a thing in Arduino IoT cloud , the code is automatically generated which will have your ssid and password in separate file. I have explained in video how you can upload the code directly from web (no need of IDE) .You just need to set pin modes and update the callback functions to digital write values into these pins .
what error do you get ? if you connect the esp32 board , does it show connected ? After installing Arduino Agent , you need to open it by clicking on it.
Make sure to input network credentials in network tab while setting up thing . Does your esp32 board connect using regular Arduino IDE? Give it a try with regular IDE. You can also copy the code from Arduino cloud and upload using Regular IDE procedure . If problem still persists then please send me an email with your setup and I will take a look and we can communicate there.
Thanks for checking out video 👍🏻.what issue are you facing with Arduino IoT remote app ? Make sure that esp32 is powered properly with 5 v supply through vin .
Thanks for checking out the video. It uses AC voltage, so please be careful while making relay connections with AC sockets and plugs. If you are not sure about how to make these AC connections with relay, then please check my video "What is relay" where I have explained how to use it with just single ac socket and plug (you will get proper idea about it). Later you can make multiple AC sockets connections as per in this video. Please take good care while working with AC.
Sir aap ke video hame inspire karte hai
Thank you very much 😃
🎉🎉👌👌nice project and tutorial. Thanks for sharing 🙏
Thanks for watching
mafia here keep going 😘😘
Thanks a lot .👍
I second Prabhats comment.
👍🏻
Top-notch 👌🏼
Thank you very much . Cheers 👍
very nice😍😍😍
Thanks 😊
Bro u could have all the lights independent using my dongle,just connect an HC05 to each light with its own mcu and have as many independent lights around your house as you want, btw where you from bro
Yup. I am from India .
@@hashincludeelectronics very nice how long have you been developing
It worked.
Is it possible to show a separate notification when all loads are connected? (like when 4 switches are on it will show system overload.)
Please check in Arduino IOT cloud if there is provision to send notification on mobile .
Badiya
Thanks man 😃
I think it will replace alexa 😀 ... Awesome work ... 👍👍
🙂👏🏻
Que tiempo de uso tiene el código, es decir es limitado o ilimitado. Gracias por el aporte.
Thanks for checking out the video 👍🏻however I did not understand what you said .
if i go outside my house , and i forgot to switch off the light..can i switch off the light using the Arduino IOT remote mobile app even at outside the house?
Yes you can . You can control from anywhere in the world 👍🏻
Can you make custom web page to control it?
Arduino cloud provides its own web app . And it’s very handy to use. You can check my “getting started with esp32 “ video where I have created custom app . 👍🏻
@@hashincludeelectronics you can also do it within a android application so you can control the bluetooth devices connected to the phone via a web page thats connected to the same network as the phone whether your on wifi or hot spotting
Sir hamare ghar ki TV smart nahi hai to ise smart banan hai to kaise kare
Bro just asking .. what will i input on the ssid and password is that the ssid of the wifi im using in our home??
And where i can get the device secret key??
I hope youll help me with the.. thank you bro.
Thanks for checking out video 👌🏻. Yes it’s the same WiFi ssid password which you use at home. Regarding getting device secrete key , it’s explained in the video . You can get it when you add the device.
And sir also we have to define pins which may differ in mcu8266
Agree . Good point 👌🏻Check the pin out of esp8266 and use those pins in the code . Code is very simple .
@@hashincludeelectronics thank you sirr
In coding is we have to provide ssid and pass or not.
Because i am totally confuse in coding...
@@dipaksonone2917 once you create a thing in Arduino IoT cloud , the code is automatically generated which will have your ssid and password in separate file. I have explained in video how you can upload the code directly from web (no need of IDE) .You just need to set pin modes and update the callback functions to digital write values into these pins .
Can we do same with esp8266
Yes sure . Just select board as esp8266 and corresponding model under the dropdown .
Bro my esp32 status is offline
Please check the video for any missing step 👍🏻👏🏻
My arduino creat agent doesn't work
what error do you get ? if you connect the esp32 board , does it show connected ?
After installing Arduino Agent , you need to open it by clicking on it.
@@hashincludeelectronics
I opened it and i have reinstated it many times to solve the problem
the device remains doesn't connected
Make sure to input network credentials in network tab while setting up thing . Does your esp32 board connect using regular Arduino IDE? Give it a try with regular IDE. You can also copy the code from Arduino cloud and upload using Regular IDE procedure . If problem still persists then please send me an email with your setup and I will take a look and we can communicate there.
arduino iot remote is not working
Thanks for checking out video 👍🏻.what issue are you facing with Arduino IoT remote app ? Make sure that esp32 is powered properly with 5 v supply through vin .
Is this circuit safe?
Thanks for checking out the video. It uses AC voltage, so please be careful while making relay connections with AC sockets and plugs. If you are not sure about how to make these AC connections with relay, then please check my video "What is relay" where I have explained how to use it with just single ac socket and plug (you will get proper idea about it). Later you can make multiple AC sockets connections as per in this video. Please take good care while working with AC.
Please help me to reach to you
You can send me email 👍🏻👏🏻