what do you guys think of the new Beast X 8K mouse? WLMOUSE Beast X 8K x Fabulous Beasts (DISCOUNT code: "MIGSS"): www.wlmouse.com/products/wlmouse-fenz-beast-x?ref=nx17fra8&variant=47824585097514 WLMOUSE Store (DISCOUNT code: "MIGSS"): www.wlmouse.com/?ref=nx17fra8
For everyone using 8k. You should use at least 1600dpi otherwise you can just use 4k since you woudnt saturate the signal bandwith anyway. 3200dpi is even better.
yoo ı wanna poınt out that u shouldnt turn on the raw ınput settıng on valorant ıf you want to use your 4k mouse at 4k raw ınput buffer drops your extra pollıng rate to a less cpu stressıng levels so ıt just decreases your hz
There might be cases thats true depending on the cpu, but you should turn it on for better performance and less stuttering, I've seen people struggling and not having a smooth experience with raw input turned off with 4khz
You should learn how to clean a bg noise for future videos. Also avoid long outros, those negatively affect watch%. Besides that nice review! ✨ *Sheesh*
Do u paid some customs? Wlmouse told me that there aren't to pay nothing 'cause their products have already taxes included also for my country but i don't know if is true
just peel the skates off under the mouse, wipe some alcohol pads on the surface where you'll apply the new skates, let it dry, then apply and align the new skates carefully.
I'm hesitating between this one and the viper v3 pro to play Valorant in Claw Palm or Palm grip 17x 10 for my hands, if anyone has any advice, thank you!!! Otherwise great video thank you.
for me, the hump is like normal, its not low and not high, the hump is just perfect for me. and what pulsar specifically? I'd recommend you check out eloshapes.com to compare the shapes
I like your question! I tested it and found out that on 400dpi its really hard to get polling rates above 5khz IF you don't move your mouse fast, but 400dpi can still reach up to 7-8khz, on 800dpi its a little bit easier to get higher polling rates without moving the mouse that much, but it can also reach the same 7-8khz, on 1600dpi and higher they definitely feel the easiest to get high polling rates without moving the mouse much, but they can also go up to 7-8khz same as the other dpi stages. In conclusion all dpi stages can reach 7-8khz but with 1600dpi or above you can reach high polling rates without moving the mouse that fast or that much. I don't really notice any difference or any benefits going above 1600dpi :D
@Migss thanks for your in-depth response. I appreciate it a lot. I've been hearing people recommending 3200 dpi to have consistently high polling, but I guess 1600dpi will do the job. Always found 3200dpi too fast. I'm still on 1khz polling mouse, but hopefully, I will upgrade to the beast x soon.
My hand size is 8cm x 18cm, the normal size is perfect for me, they have a max that's bigger so if you have a bigger grip and if you want higher hump it might be better. I'll have a review coming of it soon
The coloration looks really great, but I would´ve liked hot swap switches with it using mechanical switches, one of the reasons I choose the Max instead for the optical switches.
Got my black and white today, feels pretty solid and feels pretty nice in hand. But now I'm starting to worry about dust in the long run, especially seeing the PCB and sensor completely exposed like this, gonna be a hassle to clean
I haven't really had any problems with dust inside my mouse with the beast x, they don't really stick to the pcb or inside the mouse. But if ever the inside gets really dusty then blowing air inside of it should just blow most of the dust out. Opening the mouse is another option but I don't think you'll need to go that far.
@@Migss I see, but is it just me, or the 8k polling rate is bugging, when I change it to 8k, the mouse rate checker site only reports like 2.6k, where as 4K would show 3.8k
they are not, the people hired to upkeep the firmware ghosted WLmouse so they have discontinued the original Beast X line. Source: reddit post i saw a few days ago (no havent found it again)
@@ShyniCS damn that's a shame. I heard they're putting the beastx mini hardware into the regular beastx but I'm assuming those are just the collab versions then. kinda weird to me if the Fabulous Beasts are they're main line of the regular size for the future. oh well, there's no colors out that I enjoy so ill hope they release the original gold one eventually(or an actual white colorway) thanks for the help brother.
I also don't think they will settle with the collaboration mouse as the only Beast X 8k so they probably will release normal beast x 8ks with their own designs, hopefully.
@@Migss More like a rumors, but original firmware company did fkd WLM up. We don't know the details of the contract, so there's a possibility they might come back, or we'll just get tons of collabs.
what do you guys think of the new Beast X 8K mouse?
WLMOUSE Beast X 8K x Fabulous Beasts (DISCOUNT code: "MIGSS"):
www.wlmouse.com/products/wlmouse-fenz-beast-x?ref=nx17fra8&variant=47824585097514
WLMOUSE Store (DISCOUNT code: "MIGSS"):
www.wlmouse.com/?ref=nx17fra8
Peyton Light
Whats the scale?
same as the old beast x
length: 4.8 inch / 122mm
width: 2.44 inch / 62mm
height: 1.46 inch / 37mm
weight: 39 ±1g
@@Migss naw i meant link me the scale u used
i orderd this mouse right now with your code bro thank you im gonna wait for the mouse now (:
Ey! Thank you so much as well, I hope everything goes well with the mouse :)
So glad I watched this! I knew I was getting some weird resistance when using mine. Never knew there was film on the dot skates...
I'm glad to help :D thank you so much for watching
For everyone using 8k. You should use at least 1600dpi otherwise you can just use 4k since you woudnt saturate the signal bandwith anyway. 3200dpi is even better.
U should use 1600dpi and you have 240+ hz monitor.And good wifi
yoo ı wanna poınt out that u shouldnt turn on the raw ınput settıng on valorant ıf you want to use your 4k mouse at 4k raw ınput buffer drops your extra pollıng rate to a less cpu stressıng levels so ıt just decreases your hz
There might be cases thats true depending on the cpu, but you should turn it on for better performance and less stuttering, I've seen people struggling and not having a smooth experience with raw input turned off with 4khz
@@Migss like i said cuz that setting makes your 4 k more like a 1k it decreases your unnecessary herz to a very low amount
Are the TTC Nihil switches more on the heavy or on the light side? And which do you prefer, the Omon Opticals or these?
Perfect timing, I just uploaded a video discussing those :D ruclips.net/video/HYjSkgyWRYw/видео.html
@@Migss Haha thanks watching it rn!
Kathryn Locks
Mante Key
Beatty Plains
Timothy Street
Natalia Lake
Jeanette Station
Schumm Plaza
Schowalter Bypass
D'Amore Extensions
Ford Lake
Corwin Burgs
Marquardt Locks
Botsford Junctions
1866 Rebeca Center
Kunde Estates
Wisoky Village
Armstrong Center
are we not going to talk about your mouse grip?!?!?!?! what in the death grip is that? lol good video my bro
XD I get that alot, thank you bro :D
Connelly Estate
Lucious Shoal
Monserrat Viaduct
You should learn how to clean a bg noise for future videos. Also avoid long outros, those negatively affect watch%.
Besides that nice review! ✨ *Sheesh*
thank you so much for the feedback, I really appreciate it, definitely will do! thank you
Labadie Knolls
Grant Brooks
Shannon Ford
Vella Walks
German Forge
Do u paid some customs? Wlmouse told me that there aren't to pay nothing 'cause their products have already taxes included also for my country but i don't know if is true
I live in US and did not pay anything extra other than shipping
I also didn't pay any customs whenever I ordered and received wlmouse products
@@gunnyyt thank u very much ...well i'll do the order from their site ....I usually waited for them to put it on the site Maxgaming
@@Migss well thank u. next week i'll do the order from their site
@@babayaga.666-v8x you're welcome, be sure to use code Migss :D
Augusta Dam
mouse only shows up top 1k when i should see 8k
same lmk if u find a fix
Nikolaus Circles
u prefer using this or BeastX Mini more? also, wat's ur main mouse again? this one, right? XD
Schaden Rapids
Great great design
for real :D
Krajcik Island
does anyone know when they will have stock
any spec computer to use it that 8k polling rate? my wl beast cant have 8k polling rate
Jailyn Mill
i have the mini version with 8k but its reads only 3k maximum ????
what are your pc specs? and what app do you use to test?
@@Migss i use I9 12900K with 3070TI Nvidia 32Ram with 240hz G8 4k Monitor
@@Migss i use same website like you
@@Jason01Adana I stopped using websites since they're not as accurate as applications, try razer polling rate tester app
Just got mine but trying to use it on my work laptop and the mouse cursor goes invisible! 😢
that shouldn't happen, have you tried using the mouse on a different device? or have you tried a different mouse?
Is this mouse close in size to the viper v2 pro or should i get the beast max
Both is close but the beast x max is closer in size I think
With a 7800X3D and 32Go 6000MHz I can't go higher than 4500MHz even with 3200DPI, any idea?
Maybe inaccurate software? Try a different tester
@@Migss Using the Razor polling rate tester software, I get my 7k5k constantly, web based is shit on my computer ig ahah
Why not get a GWolves HSK pro or HTR that is coming out with 8k with you style of hand grip?
I really like using the humps of the mouse so I'm not sure about those, I'll try them if I get the opportunity though, seems very interesting.
I'm not really experienced with changing the skates of a mouse so this will be my first time so how can we change the skates?
just peel the skates off under the mouse, wipe some alcohol pads on the surface where you'll apply the new skates, let it dry, then apply and align the new skates carefully.
I'm hesitating between this one and the viper v3 pro to play Valorant in Claw Palm or Palm grip 17x 10 for my hands, if anyone has any advice, thank you!!!
Otherwise great video thank you.
Thank you so much for watching :D I like both but I would prefer the weight of beast x personally
@@Migss ty for the response u are the goat
Will there be a beast x 8k mini?
the mini can go up to 8k already, so I don't think so
@@Migss Yeah, I did some research earlier and discovered that fact. I just wish it came with better battery life.
They made it better I'm pretty sure with the new firmware updates
migss is the hump of the mouse low or high and is the mini smaller then the pulsar?
for me, the hump is like normal, its not low and not high, the hump is just perfect for me. and what pulsar specifically? I'd recommend you check out eloshapes.com to compare the shapes
Nice Video! How much of a difference does 3200 dpi make while doing the polling rate test on 8k hz?
I like your question! I tested it and found out that on 400dpi its really hard to get polling rates above 5khz IF you don't move your mouse fast, but 400dpi can still reach up to 7-8khz, on 800dpi its a little bit easier to get higher polling rates without moving the mouse that much, but it can also reach the same 7-8khz, on 1600dpi and higher they definitely feel the easiest to get high polling rates without moving the mouse much, but they can also go up to 7-8khz same as the other dpi stages. In conclusion all dpi stages can reach 7-8khz but with 1600dpi or above you can reach high polling rates without moving the mouse that fast or that much. I don't really notice any difference or any benefits going above 1600dpi :D
@Migss thanks for your in-depth response. I appreciate it a lot. I've been hearing people recommending 3200 dpi to have consistently high polling, but I guess 1600dpi will do the job. Always found 3200dpi too fast. I'm still on 1khz polling mouse, but hopefully, I will upgrade to the beast x soon.
Whats your hand size i have a big hand i am wondering if it would be comfortable
My hand size is 8cm x 18cm, the normal size is perfect for me, they have a max that's bigger so if you have a bigger grip and if you want higher hump it might be better. I'll have a review coming of it soon
@@Migss thank you
The coloration looks really great, but I would´ve liked hot swap switches with it using mechanical switches, one of the reasons I choose the Max instead for the optical switches.
I also got the optical switches for the max, can't wait :D
Does the dongle give you the battery life?
Nope it doesnt
@@Migss wow that blows :(
they might be able to do an update for that in the future, hopefully
Got my black and white today, feels pretty solid and feels pretty nice in hand. But now I'm starting to worry about dust in the long run, especially seeing the PCB and sensor completely exposed like this, gonna be a hassle to clean
I haven't really had any problems with dust inside my mouse with the beast x, they don't really stick to the pcb or inside the mouse. But if ever the inside gets really dusty then blowing air inside of it should just blow most of the dust out. Opening the mouse is another option but I don't think you'll need to go that far.
@@Migss I see, but is it just me, or the 8k polling rate is bugging, when I change it to 8k, the mouse rate checker site only reports like 2.6k, where as 4K would show 3.8k
@@shinefake48 try using an actual application thats accurate to test it, browsers can be inaccurate, also close the applications at the background.
Nice, I have a normal beastx
very nice :D thanks for watching
8k on wireless or wired?
Wireless, wired can only go up to 1k at the moment
is there any news on if the original colorways are coming back?
they are not, the people hired to upkeep the firmware ghosted WLmouse so they have discontinued the original Beast X line.
Source: reddit post i saw a few days ago (no havent found it again)
@@ShyniCS damn that's a shame. I heard they're putting the beastx mini hardware into the regular beastx but I'm assuming those are just the collab versions then. kinda weird to me if the Fabulous Beasts are they're main line of the regular size for the future. oh well, there's no colors out that I enjoy so ill hope they release the original gold one eventually(or an actual white colorway) thanks for the help brother.
I also saw that story, is it really true? Or just rumors
I also don't think they will settle with the collaboration mouse as the only Beast X 8k so they probably will release normal beast x 8ks with their own designs, hopefully.
@@Migss More like a rumors, but original firmware company did fkd WLM up.
We don't know the details of the contract, so there's a possibility they might come back, or we'll just get tons of collabs.
razer copy
but better 😀
8K WONT WORK FOR ME
Why is it not working?
@@Migss i did a mouse polling rate check and it is still at 1300 peak maybe 2k
@@Migss please can you help me its causing stutters in games too im on windows 10
@@rDiffs is your raw input buffer on? And what's your pc specs?
@@Migss i have 32gb ddr4 3080 and a 11th gen i7 11700k with a 1000 watt power supply
First
sheysh! thanks for watching :D