How to set up the new Blynk app step by step | Nodemcu ESP8266 with Blynk app | how to light led
HTML-код
- Опубликовано: 10 дек 2022
- In this video, we will learn how to set up the new Blynk app step by step. For that, I used an LED blink example.
OK, enjoy it now.
Short and sweet tutorial.Only from Repairport. If you think this video is good, don't forget to like and comment.
How to set up the new Blynk app step by step | Nodemcu ESP8266 with Blynk app
( Source code and required files )
When you subscribe to our channel and comment, the link will be shared with you instantly. Thank you Хобби
NICE TOTURIAL
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Nice work
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Great
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
very good
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
nice
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
merhaba ben esp-12e yi kullanacam ancak blynk uygulamasında yok sizin yaptığınız gibi mi yapmalıyım
Merhaba deneyin olacağını düşünüyorum.
👍👍👍👍
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
hocam bir şey merak ettim; enerji kesildiğinde led aktif vaziyette, tekrar enerji geldiğinde ise led aktif olacak mi?
Olmaz
@@TamirLimani.RepairPort peki bunun için ne yapılması gerekiyor?
@@halitbuyukaydin4426 başlangıçta buton durum verisi çekilmesi gerekir
@@TamirLimani.RepairPort teşekkürler
2:50'deki dosya kısmını anlamadım. Arduino dosyamızın içine mi kopyalayacağız? Daha detaylı açıklaması var mı?
Normalde kütüphaneleri tek tek yüklemek gerekir fakat toplu olarakta yüklenmek mümkün. Bunu da gösterdiğim şekilde yapabiliriz.
Bu projeyi yaparken gerekli olan tüm kütüphaneleri klasör halinde paylaştım bunu alıp ardunio içerisine attığımız zaman gerekli olan kütüphaneler ardunio ide ye eklenmiş olur.
@@TamirLimani.RepairPort teşekkürler, COM portuyla sıkıntı yaşıyorum belki CH341 dosyasini koymadigim içindir
@Letizia driver yüklenmesi gerekir. 2 farklı driver mevcut hangi çip varsa ona göre yükleme yaparsanız sorununuz çözülecektir.
Good
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
what if given a relay module
then it will run the device you want. Like this;
ruclips.net/video/QFyj4Gt7BZ8/видео.html
😎
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
blynk uygulaması offline olarak görünüyor, online olması için ne yapmak gerekiyor nerede eksik yada hata var acaba? teşekürler.
Bağlantı yok anlamına gelir token ve wifi bilgileri kontrol edin.
Grazie mille, spero funzioni
Please source code and required files...
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Merhaba ben yapıyorum ama hata alıyorum herşeyi ekledim ama gene olmadı bi türlü çözemedim
Hata nedir
kullandığın kart nodemcu ch340g mi
Evet
MERCI DE M ENVOYER LE CODE
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
M eescrevi e comentei
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Your source code link cannot be supported in my PC or mobile , please give me a source code link in which can be support to all devices
hi hellow were is the codeplsssss..
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Muito Obrigado Deus te Abençoe sempre
Thank you
hocam bende derleme hatası veriyor yardımcı olur musunuz
Kartı seçtiniz mi?
I want libraries files and source code
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
CODE PLEASE
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Please send the codes.
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Can you share codes and libraries with me?
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
@@TamirLimani.RepairPort Thank you for files and introductions but i have a little problem :( I did this project full correctly but when i connect to the ESP8266 Board and look at the serial monitor "Packet too big: "randomly 5 digits number" and my project is not working :( I would be very grateful if you can help me.
Did you set the setting under serial monitor to 115200?
merci de m'envoyer le code
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
kodu gönderebilirmisiniz.teşekkür ederim
Teşekkürler Bağlantı paylaşıldı, indirmeyi yapın. 12 saat sonra bağlantı kaldırılacaktır. Kolay gelsin
Sir i want the source code and the library file also
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Code please
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
how
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Kodları lazım da ?
Teşekkürler Bağlantı paylaşıldı, indirmeyi yapın. 12 saat sonra bağlantı kaldırılacaktır. Kolay gelsin.
Please give me the link
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Hope it’s works
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Hi how can I install the driver on Mac 😢?
Unfortunately I don't use a Mac.I don't know.
kodu paylaşırsanız çok sevinirim
Teşekkürler Bağlantı paylaşıldı, indirmeyi yapın. 12 saat sonra bağlantı kaldırılacaktır. Kolay gelsin.
can i get coding
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Kodu atabilir misiniz?
Teşekkürler Bağlantı paylaşıldı, indirmeyi yapın. 12 saat sonra bağlantı kaldırılacaktır. Kolay gelsin.
Can you share your code
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Code please bro
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Mine all thing are correct blynk also online still led not working
If everything is correct and the device is online, you should read this from serial.print. The first thing that comes to my mind is that the led is connected upside down, check this first. To check the led, remove the jumper cable on the D1 pin and connect it to D0 and press the reset button of the device on the card. The led will flash momentarily.
If the led lights up as a result of this test, there is another problem. If the led does not light, replace the led. Or check the voltage direction.
#include
#include
char auth[] = "YourAuthToken"; // Replace with your Blynk authentication token
char ssid[] = "YourNetworkSSID";
char pass[] = "YourNetworkPassword";
// Define the pin for the LED indicator
int ledPin = D1; // Use the appropriate pin on your NodeMCU
void setup()
{
Serial.begin(115200);
Blynk.begin(auth, ssid, pass);
// Initialize the LED pin as an output
pinMode(ledPin, OUTPUT);
}
void loop()
{
Blynk.run();
// Check if the NodeMCU is connected to the Blynk server
if (Blynk.connected()) {
digitalWrite(ledPin, HIGH); // Turn on the LED
} else {
digitalWrite(ledPin, LOW); // Turn off the LED
}
}
Mine this code is working led is on if it is connected to blynk but the code with switch is not working
code pls
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
🤔🤔
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Plsss send Source code
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
need code
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
a
The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
.
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Link dedo bhaii
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
hi sir icant recieve the i already subcriceb
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
source file
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
+
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Link alabilir miyiz?
Teşekkürler Bağlantı paylaşıldı, indirmeyi yapın. 12 saat sonra bağlantı kaldırılacaktır. Kolay gelsin.
Nice work
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
MERCI DE M ENVOYER LE CODE
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.
Please send the codes.
Thanks The link has been shared, make the download. After 12 hours the link will be removed.Easy work.