Paul I was a fuel hauler and fell 15ft off a above ground tank and injured my spine placing me in a wheelchair for the last 10 yrs now God has given me back my legs and I’ve been watching you and learning Sheetrock skills to fix cracks around my house I can do woodwork but never done Sheetrock
Damn that’s a rough boot camp brother. Thank God you are back on your feet. That’s a dangerous job. Please pass by this video in 5 days, the winners will be posted in the description box! I’m going to handle the winners this way from now on because I have a very hard time getting in touch with viewers when they win. Good luck my friend!
Doing a lot of DIY home renovations and have been avoiding the drywall at the moment, but always appreciate a good tutorial showing the intricate steps that many do not show!
Thank you Joe! Don’t forget to come back and check the description box in 5 days. From now on I will post winners in the top of the description box. Have a great day, buddy.!
LOl... I really don't like to do drywall, so I would only do a room or 2 for clients. Now I only do it for family or friends if they need help. Have a great weekend!
Great tips and content! I have always had issues taping drywall.. this helps out a lot! I have always used your videos for any help I needed. Thank you!
Hey Paul haven’t talked with you in a while, keep up the good work. Thanks again for helping me out when my shop burned down, all good now built a new one with help from a lot of your tips. Thanks brother.
It was my pleasure my friend, I’m so glad I could help! As a firefighter, I can understand what you went through. It is devastating when you lose your personal belongings to fire! I would love to see some pics of your new shop. Please contact me @ www.Paulstoolbox.com. Have a good day buddy!
I appreciate you watching, I’m feeling much better and ready to get back to work! i have great doctors and I am confident that things will go well. Have a great day!
Thanks again. Also, I sure wish I could have seen this after Harvey. I know all the problems I could have avoided when putting in the drywall. Now I know how to do it the right way. THANKS AGAIN!!
@ Houston, TX. We have communicated before. I had hoped to I had hoped to stop by and meet with you on my next trip through Louisiana. Not sure when that will happen, but I believe I may be there for a conference this coming spring. I remember me telling you about watching a video where you showed how make perfect door trim with a simple little device that would mark perfect miters. I showed it the contractor working to restore my house after Harvey. I cased in all my doors and windows myself with it. The contractor was blown away by how great it worked. You should patent it and license it to some company like Woodpecker or FastCap to make out of aluminum. Keep up the wonderful videos. I never miss one.
@@johnmason2483 Hey John, Please click this link and in the contact section , give me your full mailing information. You are a winner of a Lighted level. Please write winner of the level..... Thanks! www.paulstoolbox.com
Thank you! I hope my next video will give you new tips that will help. I will be posting it in a few days and it will show the finished wall. Have a great day!
I like seeing that you tape the edges of your metal corner bead. They often tend to crack around the edges without tape. Not many finishers use that method.
Thanks, CHARLES, I really appreciate that! I know a lot of guys who just come back and caulk the inside corners and that’s fine, but I like to put tape on it. Have a great day, buddy!
Great show, Paul. I have always used the mesh tape, but after watching you doing it with paper, l am going to try it. Thanks again. PS, where do you get the paint mixer?
Good morning, I’m glad you asked. It was sent to me to test out a couple of years ago. I couldn’t find it anywhere, including Amazon , but after reading your post, I looked it up and you can get it from this site hydestore.com/products/h-43440?variant=41209850495029&country=US¤cy=USD&mer&gad_source=1&gbraid=0AAAAAD_awc2-aa0IuTnleQwI9Wn5Lb13-&gclid=EAIaIQobChMIkLyFtP_qiQMVpG1_AB2iqBV0EAQYASABEgLNtvD_BwE It’s an awesome mixer, it collapses to fit in a lid of a 5 gal bucket. Have a good day!
Paul I was a fuel hauler and fell 15ft off a above ground tank and injured my spine placing me in a wheelchair for the last 10 yrs now God has given me back my legs and I’ve been watching you and learning Sheetrock skills to fix cracks around my house I can do woodwork but never done Sheetrock
Damn that’s a rough boot camp brother. Thank God you are back on your feet. That’s a dangerous job. Please pass by this video in 5 days, the winners will be posted in the description box! I’m going to handle the winners this way from now on because I have a very hard time getting in touch with viewers when they win. Good luck my friend!
Doing a lot of DIY home renovations and have been avoiding the drywall at the moment, but always appreciate a good tutorial showing the intricate steps that many do not show!
Thank you buddy, I really appreciate you taking the time for me!
Thank you Joe! Don’t forget to come back and check the description box in 5 days. From now on I will post winners in the top of the description box. Have a great day, buddy.!
Paul you’re a great teacher, and thanks for all the tips that improves all of our work as diyers.
I hope these tips help you on your next project. I'm sure your projects come out better than mine. Thank you and have a great day!
I love watching your shows.
Thank you Juan, have a great day buddy!
Paul, glad to see another video!! Keep them coming!!
I appreciate you taking the time for me, I will have the final video on this project in a couple of days. Thank you my friend!
Thanks, Paul. Good tips. I don't do drywall everyday so this helps.
LOl... I really don't like to do drywall, so I would only do a room or 2 for clients. Now I only do it for family or friends if they need help. Have a great weekend!
Glad to see you back. Hope all is well.
Thank you Robert! It's been a long 3 years, but I am really feeling better. Have a great weekend!
Great tips and content! I have always had issues taping drywall.. this helps out a lot! I have always used your videos for any help I needed. Thank you!
Thank you, I really appreciate that. Have a great weekend!
Paul love your channel I’m a disabled retired truck driver and DIY I’ve learned so much watching you
Man I really appreciate that! If you don’t mind me asking. What caused your disability? I hope you are doing well!
Every vid is gold. Thx PR!
Thanks, you just made my day better!
Good to see you again!!
Thank you Ed, it’s good to be back. Im hoping to stay this time. Have a good night my friend!
Great tips on wetting tape.
Thank you Dave, I really appreciate that!
Hey Paul haven’t talked with you in a while, keep up the good work. Thanks again for helping me out when my shop burned down, all good now built a new one with help from a lot of your tips. Thanks brother.
It was my pleasure my friend, I’m so glad I could help! As a firefighter, I can understand what you went through. It is devastating when you lose your personal belongings to fire! I would love to see some pics of your new shop. Please contact me @ www.Paulstoolbox.com. Have a good day buddy!
Always a please to hear you tips they make jobs easier for us DIY people ❤😊✌🏼
Thank you Gina, it’s great to hear from you! Hope you are doing well. Have a great day!!
Thanks for video Paul glad you look to be feeling better 💪🏻
I appreciate you watching, I’m feeling much better and ready to get back to work! i have great doctors and I am confident that things will go well. Have a great day!
Another great video! Always learn so much. Thanks!
Thank you Tim! I really appreciate you taking the time for me.
Looks great. Excellent video/definite bookmark. I'll be drywalling again soon after last doing it in 2019. Lucky me.
LOL... It's definitely not my favorite work, but OI can think of a lot of things worse. I hope it's not too big of a job. Thanks!
Lookin' good! Hope we get to see the final product.
Thanks Chad, I finished it and will post next week. I still have to edit it. Have a good night!
Thanks again. Also, I sure wish I could have seen this after Harvey. I know all the problems I could have avoided when putting in the drywall. Now I know how to do it the right way. THANKS AGAIN!!
What part of Texas are you from? Harvey was a bad one.
@ Houston, TX. We have communicated before. I had hoped to I had hoped to stop by and meet with you on my next trip through Louisiana. Not sure when that will happen, but I believe I may be there for a conference this coming spring. I remember me telling you about watching a video where you showed how make perfect door trim with a simple little device that would mark perfect miters. I showed it the contractor working to restore my house after Harvey. I cased in all my doors and windows myself with it. The contractor was blown away by how great it worked. You should patent it and license it to some company like Woodpecker or FastCap to make out of aluminum. Keep up the wonderful videos. I never miss one.
@@johnmason2483 Hey John, Please click this link and in the contact section , give me your full mailing information. You are a winner of a Lighted level. Please write winner of the level..... Thanks!
www.paulstoolbox.com
I wish I could have learn sooner. It’s a great way to doing it right.
Thank you Manual! Have a great weekend buddy!
Thanks Paul.
Good morning Ron, it's great to hear from you buddy. Have a great day!
Hi Paul, thanks for the help on taping. I got a DIY ceiling coming up!
Thank you! I hope my next video will give you new tips that will help. I will be posting it in a few days and it will show the finished wall. Have a great day!
Wow your videos are great, thank you so much Paul 👍😁
Thanks so much, I appreciate you taking the time to watch my videos!
Great video, thanks for sharing your skills with us.
Thank you for putting up with me. Have a good one my friend!
Good show Paul. I've been doing it your way since I d'ont know when.
Wow, it's always good to hear from like minds! Have a great weekend Thomas!
You look great brother!!
Hey Spencer, I hope you are doing well brother. It's great to hear from you!
@ I’m so glad you’re doing well.
Love the tips.
I dont like painting, but perhaps if i start spraying it, I may change my mind.
I painted for years, but I find it getting much harder to cut in. My eyes are going south!
I will check back
Paul
Great video and hope you’re doing well.
Thank you Frank! I’m doing ok buddy, one hurdle at a time😜have a great day buddy!
Great video!
Thank you, I appreciate you watching! Have a great day!
Great video
Thanks for watching, I appreciate it! I will have new tips on part 3 in a few days. I really appreciate you taking the time for me!
I like seeing that you tape the edges of your metal corner bead. They often tend to crack around the edges without tape. Not many finishers use that method.
Thanks, CHARLES, I really appreciate that! I know a lot of guys who just come back and caulk the inside corners and that’s fine, but I like to put tape on it. Have a great day, buddy!
I have been watching you for several years. I was wondering when the next video would come out.
I really appreciate that my friend! I will have some new tips on part 3 in a few days, I hope you like it! Have a great day!
I also am old school!!!!
Thanks, I’m beginning to think we are fading out!
Great show, Paul. I have always used the mesh tape, but after watching you doing it with paper, l am going to try it.
Thanks again.
PS, where do you get the paint mixer?
Good morning, I’m glad you asked. It was sent to me to test out a couple of years ago. I couldn’t find it anywhere, including Amazon , but after reading your post, I looked it up and you can get it from this site
hydestore.com/products/h-43440?variant=41209850495029&country=US¤cy=USD&mer&gad_source=1&gbraid=0AAAAAD_awc2-aa0IuTnleQwI9Wn5Lb13-&gclid=EAIaIQobChMIkLyFtP_qiQMVpG1_AB2iqBV0EAQYASABEgLNtvD_BwE
It’s an awesome mixer, it collapses to fit in a lid of a 5 gal bucket. Have a good day!
Do you have to cover the metal corner bead with tape?
No, you just have to put corner tape on the inside corners. You can cover the corner bead with tape when you cover the inside corners. Thanks!
Your old school, that is an understatement 😂. Great work. You were working that wrist like a democrat 😮
Wow, did you just kick me below the belt? 😂
LOL
As a plasterer I should not be watching these videos !
Sorry…lol