I had the same issue on my iphone, followed the video and now it works perfectly. It is not (or not only) adding pressure to the connectors, but also insulating them from the LCD metal chassis. In fact, I didn't put back the square metal cover, if I did I would have the issue back again. Nor did I put back the metal latch of the front cable, it stays in place as well. Thanks for the video, helped a lot.
Hi there I wanted to try this out on my phone did you put the paper in between the connectors and metal guard or did you leave me metal guard out? Also what paper did you use thanks
thanks dude. i almost went insane by suffering from the defect touch. just put some paperpieces between connectorbacks and the metalshroud, and it works fine.
try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD. i just did that trying from thin alumunium paper from cigarette pack folding it 4 to 5 times. the 5 times folding works for me.
damn dude thanks a lot! my old iphone 5S now can function again just because of a thick piece of paper to give an extra pressure to the position of IC U15 (controls touchscreen). nice help!
So your just adding pressure to the connectors? Is this because the solder joints on the boards connector has gone bad? What were the symptoms? What was the phone not doing or doing wrong? I am looking for a fix for ghosting, is that what you are doing? Some talking or some type of description would make a much better video. Thanks anyway.
try from thin paper and folding it, by folding it again BUT NOT TOO THICK! carefull damaging you LCD coz of too much pressure. i just did trying from thin alumunium paper from cigarette pack folding it from 4 to 5 times. the 5 times folding works for me.
Cause I didn’t get a I’d touch to go along with my logic board but that doesn’t matter wi try the touch screen right what if I just remove the metal piece and don’t put the plastic or whatever that was over it would that still work possibly
No explanation no description of what you did nothing to help anyone except show how you opened it. And you didn’t even show it was working 100% next time try explaining and use a iPhone you have a password to. SMDH
@@13504K try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD coz of too much pressure. i just did trying from thin alumunium paper from cigarette pack folding it from 4 to 5 times. the 5 times folding works for me.
try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD. i just did that trying from thin alumunium paper from cigarette pack folding it 4 to 5 times. the 5 times folding works for me.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I had the same issue on my iphone, followed the video and now it works perfectly. It is not (or not only) adding pressure to the connectors, but also insulating them from the LCD metal chassis. In fact, I didn't put back the square metal cover, if I did I would have the issue back again. Nor did I put back the metal latch of the front cable, it stays in place as well. Thanks for the video, helped a lot.
where you put the tape ?? on the connectors directly or plate?
Hi there I wanted to try this out on my phone did you put the paper in between the connectors and metal guard or did you leave me metal guard out? Also what paper did you use thanks
This really fix my problem bro,i use 5s for my 2nd phone..thanks u so much..u save my money😁
You are saving my phone
IS so HELPFULL THANKS YOU !!!!!
Sorry. What is the name of that red adhesive tape you use?
thanks dude. i almost went insane by suffering from the defect touch. just put some paperpieces between connectorbacks and the metalshroud, and it works fine.
Keigano realy
i dont have that plastic sticker so what should i use please suggest
try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD. i just did that trying from thin alumunium paper from cigarette pack folding it 4 to 5 times. the 5 times folding works for me.
damn dude thanks a lot!
my old iphone 5S now can function again just because of a thick piece of paper to give an extra pressure to the position of IC U15 (controls touchscreen).
nice help!
paper ??? how can you explain me fully please
What is the tape for ?
Thank you so much..This video save my 5s.
What is that thing you used?
Excellent. I was just meandering around that idea and wondering if it was worth a try. Thank you!
So your just adding pressure to the connectors? Is this because the solder joints on the boards connector has gone bad?
What were the symptoms? What was the phone not doing or doing wrong? I am looking for a fix for ghosting, is that what you are doing?
Some talking or some type of description would make a much better video.
Thanks anyway.
It worked on my iphone 5c !! Thanks!
thanks man its not working that good still but its working better than before thanks man🥰🥰
Bro what is the think u have put in phone
Nice video. What is that 3M adhesive sheet called- would like to get some.
Thanks
Can i use electric tape instead ?
try from thin paper and folding it, by folding it again BUT NOT TOO THICK! carefull damaging you LCD coz of too much pressure.
i just did trying from thin alumunium paper from cigarette pack folding it from 4 to 5 times. the 5 times folding works for me.
Hi my iPhone has the same problem but it has like a checkered pattern on the screen it’s not a virus
Tanisha Sata it's just the way it has been damaged. Like water damage
Same issue as me and I have no water damage but I took it apart right beforehand
that music though 😍😍 toatally love remixes!
its not a remix its a mashup
I did this, everything’s connected correctly but the screen won’t turn on, any ideas?
sadie boyle the wire to the battery unplug it then put it back in
You might have a shot battery, might need a new lighting cable charging port, or you broke the ribbon cable to the screen itself
Worked. Thank you so much!
problem lcd?
Cause I didn’t get a I’d touch to go along with my logic board but that doesn’t matter wi try the touch screen right what if I just remove the metal piece and don’t put the plastic or whatever that was over it would that still work possibly
No explanation no description of what you did nothing to help anyone except show how you opened it. And you didn’t even show it was working 100% next time try explaining and use a iPhone you have a password to. SMDH
The emergency and cancel are not working when i touch..what i can do?
Bro sorry to force you can you make a clear and bright
otmo video ajudo bastant ,eu tava deseperado tentei de tudo mas so este video resolveu meu problema forca ai cara
He forgot to replace the latch covering the small cable next to the microphone.
Get a old screen out and get new screen fixed
I faint see what he is fricken doing pute some lighting up
Keypad still doesn't work after following your instructions....any advice?
Patt Brust samehere
@@13504K try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD coz of too much pressure.
i just did trying from thin alumunium paper from cigarette pack folding it from 4 to 5 times. the 5 times folding works for me.
thanks for not showing us what you did.
Love from Kashmir
Problem i dont have small screw driver
Can u help my iphone 5s too the same kind of issue is my problem .. I decided to change screen but i cant afford
@Indra what an ignorant.. just watch the video carefully.
Very Good, try to provide good lighting.
thank you sooooo much!
What is that in 4:57
how much do you think this will cost
Can someone please tell me what is the song called😩😩I really like it
Darude sandstorm
is this the new music channel
Whats the name of tape @thenerdsden
A'Naiyha Hughes thats 3M just apply pressure to the connectors.
Double tape
Two side tape
Nipun Mendis So any normal tape will work too? Or does it have to be 3M? Or any thick tape?
Meje iphone 5s ki new display leni h kha se milegi or kitni ki
1800 so asansol west Bengal
Yes same problem... Plz help me
What's your musics vídeo ?🤔🙏
It's called shit pop music mega mix.
Bro red color tape what bro
When I using my iPhone is suddenly stop I don’t know what to do
it didnt work on mine. what can i do?
+Mario 055 you must change the display..
+Mario 055 if so you have to change the screen
Same thing happen to my iPhone 6
Bro dilplay not scratch. But not touch..
That idea work for this problem?
This is the most annoying thing my phone is lagging and doing that
thanks
Salute!!
I LOVE YOUR VIDEO
THANK YOU SO MUCH
NICE VIDEO
+rachid senan. Welcome
+rachid senan welcome!
what the music name
Darude sandstorm
My not work king phone 5s
same problem in my 5s
nice one!
الفلوووس الى عملت كل دة
فلوس الاعلانات يارب يحققوا حلمى زمان بتاع ال هومليس
وافريقيا انا لا احب المال
Did not work
Phone no dogi
Same as happen for me I need help somebody who can fix for me
Nice
7not working perfectly
?
When you typing 7number it's not working properly
Yeah thats right
wtf is the red thing you cut
its two sided tape (sticker)
@@Erbilforever where can i get it??
punsher Fauzi any electrical or hardware store
Instead of Doing this I Ripped my Phone and Threw it in the Water
Video
Bhai mara phone bhi thik kar do
i love the mash up music !!!!!!!!!!!!
Thanx my bro 😍
Didnt work for me 😫
try thicker paper a bit, by folding it again BUT NOT TOO THICK! carefull damaging you LCD. i just did that trying from thin alumunium paper from cigarette pack folding it 4 to 5 times. the 5 times folding works for me.
Vine por el touch y me quedé por la música
lol
рукикрюки
So boringgggggggg
bhai voice bala videos banao plz
Cheater
😍